Trx FEBC

Hi...
Trying to use Trx FEBC to post bank statement, getting the following error:
Error: (00 341) Runtime error CALL_FUNCTION_NOT_FOUND has occurred
Any ideas what this is and why it is evident?
Thanks in advance.........

Hi
better to consultant your technical team to resolve this issue, hense it was a technical issue.
SRINU

Similar Messages

Manual Layout data not saving to trx cube

Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWer

Hello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil

TRX F150 -Dunning

Dear colleagues,
Further to the lauch of trx F150 for dunning I get a spool and I could print it but I need to turn it into a pdf and send it to an e-mail customer's address.
In case I have a spool that has several reminders for payment relating to different customers, there is a problem! That, because of the fact I can't share a document for 2 or more receivables and I can't send it to each customer by mail.
How can I solve this problem?
Thanks in advance.
Luca Stella

Dear friend
Agreed. However, live situation is User has performed Dunning run for all customer by mistake, where is not suppose to. and this dunning run is ended up with "Duning printout terminated" error.
If we fix the termination reason and complete the dunning then all outputs will go to customers automatically by e-mails from SAP. and we want to stop this.
hope I am clear and the requirment we are looking at...
best reg
S. Habib Pasha.

Trx F-53, The difference is too large for clearing Message no. F5263

Hi,
I created a PO, then I posted the goods receipt, the invoice and I was trying to
post the payment by F-53 trx.
When I select an open item from the list and I try to simulate the posting by the menu (Document, simulate), system replies by:
"*The difference is too large for clearing
Message no. F5263*"
Cannot understand why it is not possible to post the outgoing payment
Regards

Dear Sappione,
did You check the tolerances?
Check in transaction OBY6 the indicator 'No forex rate diff. when
clearing in LC' is not set the amount is converted with the exchange
rate valid at clearing date, in case You're clearing in LC a foreign document.
When you post a clearing transaction with rounding
differences, those differences are posted to an additional line item
GL accounts. This account determination is customized as follows :
FBKP - Exchange rate differences -
Exchange rate difference in open items - KDF -a/c XXXXXXXXX
(Realized gain exchange rate difference)
The accounts used for rounding differences when clearing
are the realized gain/loss exchange rate accounts.
please check all the 3 suggestions.
Mauri

Error while loading new trx types to a new OU

Steps to reproduce:
Please note, source and target instance are same here
1. Assume X is the existing OU, and Y is the new OU setup at basic level
2. Dowloaded Receivables trx types data as an extract for OU = X
3. Modified the xml file to point it to new OU = Y
4. Re-uploaded the extract to iSetup
5. Used this new extract to perform a load in the same instance
6. Below error received.
Can you pls review and help me soon.
The following exception has occured while processing:
Object Name : Cust Trx Types
Record Identifiers : <Name> = 'Credit Memo'
Exception : Exception occurred in API 'Transaction Types API.'
Entity 'CustTrxTypeEO'
<Name> = 'Credit Memo'
<Business Group Name> = 'Setup Business Group'
<Org Name> = 'iSetup OU'
java.lang.NullPointerException
     at java.lang.String.<init>(String.java:147)
     at oracle.apps.ar.ispeed.transactionType.server.CustTrxTypeEOImpl.initialize(CustTrxTypeEOImpl.java:996)
     at oracle.apps.ar.ispeed.transactionType.server.CustTrxTypeEOImpl.doDML(CustTrxTypeEOImpl.java:1898)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4530)
     at oracle.apps.fnd.framework.server.OAEntityImpl.postChanges(OAEntityImpl.java:1759)
     at oracle.apps.az.fwk.server.BEEntityImpl.postChanges(BEEntityImpl.java:230)
     at oracle.apps.az.fwk.server.BEImport.validateOneRecord(BEImport.java:1962)
     at oracle.apps.az.fwk.server.BEImport.endElement(BEImport.java:759)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1318)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:205)
     at oracle.apps.az.fwk.server.BEImport.importXML(BEImport.java:377)
     at oracle.apps.az.fwk.server.BEApplicationModuleImpl.importFromXML(BEApplicationModuleImpl.java:401)
     at oracle.apps.az.r12.api.BC4JAPI.importAPI(BC4JAPI.java:857)
     at oracle.apps.az.r12.loader.cpserver.APILoader$APIExecuter.run(APILoader.java:648)

If you are on R12, please apply the patches in these two docs and check then.
iSetup: Imported Transaction Types Using iSetup Populates ORG_ID Value In Legal Entity Field [ID 1340427.1]
R12.1: Loading Payables Option Extract into Target Fails with the Following Exception: java.lang.NullPointerException [ID 1323037.1]
Also, make sure you have all the recommended patches applied.
Isetup List Of Mandatory Patches For R12 [ID 811040.1]
iSetup Mandatory Patches post 12.1.1 [ID 857551.1]
iSetup Mandatory Patches for 11.5.10.2 [ID 1317257.1]
11.5.10.2 isetup mandatory patches [ID 1337228.1]
Thanks,
Hussein

Error in adding custom fields to mm01/mm02/mm03 trx

Hello People,
To add my custom fields in the basic view tab of MM01 transaction, i have performed the following steps:-
1. Inserted the append structure in MARA table with the required fields.
2. Copied function group 'MGD1' to 'ZMGD1' and then set the layout of screen '0001' as per my requirement.
3. Then i made changes in spro as
SPRO->Logistics-General->Material Master->Configuring the material master->define structure of data screens for each screen sequence and inserted my program name( of function group 'ZMGD1') and screen number(0001) in 21(Std ind.(short) tab pages)->7(Basic Data 1)->8(sequence).
Now, if i click on SPRO option (view data screen), then i can see my fields added in basic data view...
but when i execute 'MM01/MM02/MM03' trx there my added fields do not appear....
Does anyone know where i am missing out??
Please suggest...
Thanks in advance..
Rgds,
Abhi

Here are some notes I have from when I recently added a new screen/subscreen to Material Master transactions. Hopefully this information will help you.
This guide should be used in conjunction with OSS note 44410 and IMG notes Logistics->Logistics Material Master->Material->Configure Customized Material Master.
Online Maintenance.
1. Add fields to append structure ZAEMARA.
Use data dictionary maintenance u2013 SE11
2. Generate table MARA.
3. Add fields to view MARU and generate.
Use data dictionary maintenance u2013 SE11.
4. Create new sub-screen or add new fields to screen SAPLYMM1 9001.
Use Screen Painter u2013 SE51.
Change flow logic to add fields to field: statement and to add any validation required. Generate screen.
If this is the first time additional data has been added to material master it will be necessary to create a new function group and associated programs. See Configure Customised Material Master paragraph Requirements.
5. If new sub-screen, add to Customer main screen.
Transaction OMT3.
Double click on u2018Std industry sequenceu2019.
Choose customer screen and Details.
Change the first occurrence of 0001 (blank screen) to new screen number.
Save.
Back arrow.
Click on Transport button and choose required transport.
6. To include in 'Copy with Reference' processing - MM01, add new MARA fields to table T130F. (in each client)
Use Transaction SM31. (make a copy of another ZZ field by typing over existing name).
Add to transport manually:- R3TR TABU T130F + individual keys
7. Test Material create, change, display.

Substitution for "Cost of sales Accounting" not working with cycle-trx KSC5

Hello togehter,
I have a problem that it seems that a created Substitution for "Cost of sales Accounting" is not executed in our System when running a cycle for Indirect Activity Allocation (Trx. KSC5).
Now I want to debug the Indirect Activity Allocation but I don't know how those Substitution Steps are generated as code that I can set a breakpoint when executing the cycle with Trx KSC5.
I want to try a trace when activating the substitution with transaction OBBZ but I'm not able to analyze in which Forms/Functions the Code is generated.
I also saw some OSS Notes that there are problems with "Cost of Sales Accounting" but I don't know concretely what to do to solve that special problem.
Kind regards
Udo

thanks for your answer.
I added the filed FKBER in table VWTYGB01.
Now I can select field "functional area" for CO Substitution.
nevertheless substitution does not work and set functional area on Dummy FB 9990 for CO postings to CO-object without Functional area.
Thats curious because I maintained exactly the same Substitution on an other SAP System (IDES Test System) and here it works.
Any ideas?
Are there further settigs required after maintenance of table VWTYGB01??
Thanks in advance

CRM 5.0 Dynpro error in BP trx Address Tab

Hi Guys,
We have a Solution Manager based on CRM 5.0 and trx. BP has the address tab's fields mixed up.
Whe thought it was SAP Logon version but it happens with SAP Logon 7.10 and 7.20. In other installation with same SAP Logon the problem doesn't happen.
Regards,
Renato

As per SAP Support response:
Could you please try to regenerate the dynpros with transaction BUSP?
Please select "All screens" so all the BP screens are re-generated.

USER EXIT or BADI to update the field in trx. ME41

Hi guys,
My requeriments is update the field EKKO SUBMI of record when the trx. ME41 but can not find how to do it, the BADI ME_PROCESS_CUST the method POST not allowed me to meet user and not allow the update the field.
Please help ...
Thanks.

Hi Ramana,
Go to SPRO Transaction and follow the below path
Customer relationship management>Transactions>Settings for Service Processes>Business Add-Ins and you will find 8 BADI's.
Check these BADI's useful for you.
Regards,
Lijo Joseph

Short dump in trx VL02N and MIGO after upgrade to ECC 6.0

Hello,
We are doing an upgrade from R/3 46C to ECC 6.0 and we face a shortdump in trx MIGO (upon saving the document).
DBIF_RSQL_INVALID_REQUEST
a BKPF_INSERT in program SAPLF005
The same shortdump happens when doing a Goods Issue on the SD side.
Looking at the program, this is not modyfied so I guess it is a standard SAP error.
OSS however, up to know did not respond to my message and there does not seem to be a SAP Note on this issue!
Anyone had this problem before. How did they solve it.
Thanks for any reply,
Aart

When exactly does this error appear? On save? clicking on a specific entry?
I suggest opening an OSS call for this problem, this doesn't seem to known (at least I didn't find any notes)
Markus

Not able to post in the past by trx ABSO 'cause of transfer date

Hi,
First: I researched about ABSO, E AA698, T_ANLB, T_ANLC, and u201Cacquisitionu201D u2013 No answer find.
I need to post by trx ABSO an acquisition value in a depreciation area that does not post into G/L. For that I created an special trx type, and it works OK if I post it on 31.12.2009 trough 31.12.2011. But when I tried to post in the past (2006), the system tells me the year is closed. If I change the transfer date to the past (2005) the system gives me the error AA698, "SYST: Abnormal termination (T_ANLB not equal to T_ANLC)"
By what I read in other questions and sap notes, I checked:
u2022 ANLB-LGJAN=2011
u2022 ANLC-GJAHR=2011
u2022 T093C- LGJAHR=2011
u2022 T093C- DATUM= 31.12.2005
I also run programs with no error found:
u2022 RACORR96
u2022 RACORR95
Complete scenario is:
A new area was created only for Management issues, and it's needed that this area shows an acquisition value, in the past. For that I do the following steps:
1. The asset has a u201CCapitalization dateu201D (31.08.2006), OK, it is before the acquisition date Iu2019m using in ABSO (31.12.2006) u2013 I also tried with 31.12.2007 and it didnu2019t work. It does works if I use 31.12.2010
2. The transfer date is before the posting date in ABSO u2013 OK, I set 31.12.2005
I also notice two things:
u2022 That in the explorer (AW01N) if I have the transfer date in the past (31.12.2005) the system also gives me the same error message AA698.
u2022 That I can post by ABSO if I use date 31.12.2009, or bigger.
Finally, the only thing that I notice is that in 2006 and 2007, in ANLC, the asset has not the same number of areas that it has in ANLB, but I guess it has nothing to do, because for 2008 the ANLC has the same number of areas and I canu2019t post either.
Please, do not block this question for answers. I checked the forum previous questions and answers and I didnu2019t find any regarding u201CPosting in the pastu201D and error AA698.
If you think this issue was already answered in the past, guide me a little bit more so I can solve the issue and, I will thank you very much!
Any help that you can give me I will appreciate it very much!
Thanks in advance!!
Ezequiel (Zeque14)

Hi,
have you checked if the field T082AVIEWB-AUTHORITY is on 2 ?
Example:
MANDT FIAA_VIEW AFAPL AFABER AUTHORITY
100..... . 01..... . ABC ..... . 01..... . 2
100..... . 01..... . ABC ..... . 02 ..... . 2
100..... . 01..... . ABC ..... . 15..... . 2
100 ..... . 01..... . ABC ..... . 20..... . 2
100..... . 01..... . ABC ..... . 30 ..... . 2
100..... . 01..... . ABC ..... . 34..... . 2
100..... . 01..... . ABC ..... . 35..... . 2
100..... . 01..... . ABC ..... . 37..... . 0 set to 2
In note 900767 you find the report RACORR_VIEW0_SET to correct this.
Could you please check if the following threat is helpful: Error AS02 AA 698 - SYST: Abnormal termination (T_ANLB not equal to T_ANLC)
regards Bernhard

CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0

Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque Escaler

Hi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek

The data in the table HRP1001 is inconsist with trx: ppoma_crm

Hi gurus:
I create a standalone Structure Model in SAP CRM for service scenario.
I have an organizational unit that has two positions; one is a leader position and the other is normal position.
We are using a function RH_STRUC_GET with relation u201C012u201D to look for the leader position from one organizational unit in the HRP1001
We realized that in the HRP1001 exists a lot of position assigned with the relation u201C012u201D As the organizational unit has all of leader positions that are incorrectly because this is not like I created in the trx: ppoma_crm. As I said above for every organizational unit has two positions: one leader position and the other normal position.
Do you know if there is a report that updates the table or is it a standard behavior?
Thanks in advanced.
Susana

Hi:
When you copy a organizational unit or a position an then is moved to another hierarchy, in the table HRP1001 is kept that data as the original unit or position from was copied.
We solve the problem delete all these records and in the future no create with copy of others.
Susana

What program is used by Trx F110 to make the report text file?

Hello everybody!
Do you know what is the program used by trx F110 (Automatic Payment transactions) to create the flat text file in the Operating System? I know that, in case of a payment method 'C' (check), SAP can print the check using the programs that appear at Printout/data medium tab (listed in the Form printing/DME box). But the issue is that the check is printing the street address of the vendor, not the one of the ALTERNATIVE PAYEE, in this case the payee is one of the vendor customers, but the check does not print the customer address.
I would be glad if I could find the txt file creator program, due the information is sent to the printing program is at this file, so I become able to investigate the behavior of the program. Further beyond: do you know why F110 is not able to print the address of a customer of the vendor when making checks with alternative payee being one of their customers? Thank you and regards!

What gives you an impression that a seperate program is called to write file at OS level.....it could be the program running behind the F110.....try checking the same...and look for GUI_DOWNLOAD in the program.

Add Header fields in Confirmation trx SRM 5.0

Hi guys,
In the standard version of SRM 5.0 the only fields provided in header of the confirmation are:
Conf.Number
Conf.Name
Delivery Performance date
PurchOrd.Number
Reference Document number.
We need more fields for information in the case of a Service PO. (Reponsable Internal, external, Place of performance of service etc)
How can one add input-fields in this trx?
The content of these new fields also has to travel to the Backend via the message type MBGMCR.
Anyone can give me a clue how to do this?
Thanks
Aart

Look at this strcuture INCL_EEW_PD_HEADER_CSF_CONF.

Trx FEBC

Similar Messages

Maybe you are looking for