Try to burn Blu Ray. It says: Not enough disc space

Hi everybody,
I try to burn a blu ray disc. My Blu Ray Writer is: HL-DT-ST BD-RE BH10LS30
I use 25GB BD-R Discs from Verbatim.
If I try to burn a 20GB *.iso file, every tool I tried says immediately: There is not enough disc space. What is wrong?
Even if I try to burn smaller files to Blu Ray, it always says: There is not enough disc space.
I'm confused
Regards
Maik from Germany

The 'There is not enough disc space' message appears immediately. It doesn't matter if the output file is 500MB or 20GB.
I tried different BD-R discs. It is always the same message.
I found a similar case:
I am trying to burn a blu-ray disc but having problems.
Do I really have to buy a 90$ tool so I can write my movie on BD-R?

Similar Messages

  • Im try to import a large amount of pictures to Iphoto. I have pleant of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

    Im trying to import a large amount of pictures to Iphoto. I have pleanty of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

    I. I want to import 58.64 GB of Photos from an external HD
    2. I have 278.28 GB space left on my HD
    3. The exact error message goes like this......
    Insufficient Disk Space
    iPhoto cannot import your photos because
    there is not enough free space on the
    volume containing your iPhoto library
    I Have researched this and most advice is to empty the iPhoto trash. I have already done this and it did not help.
    Thank you for helping

  • Install ios7 on ipad2 when it says not enough disc space

    When trying to install iOS 7 on my ipad, my ipad tells me not enough space.  I have 2.3 GB in photo but I can't figure out how to move it to the cloud where I have 12 .2 gb available.  How do I move this so I have enough space in my ipad for ios7?

    Connect iPad to iTunes and Check For Updates (tap to enlarge image)

  • I have an a burning preparation error that says Not enough free disnot k space for encoding the remaining assets. Is this because i don't have enough memory on my macbook?

    i have a burning preraration error that says not enough free space for encoding the remaining assets.  Is this error on my iDVD coming up because i dont not have enough space on my macbook?

    thank you

  • After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive??

    After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive?? 

    Janet.b wrote:
    About 3 years old...pretty dated now I guess.  Am thinking I may just need to have it upgraded by a Mac tech.
    For what the Apple Store's charge you can buy almost buy a new computer.
    Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
    I did the drive replacement myself, got a faster drive of better quality for $300 instead.
    Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
    The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
    So you see what's going on here.
    I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
    They can offer more personalized care which you need. Clone your old drive to the new and everything.
    With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
    For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

  • LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

    LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

    Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

  • I cant sync my ipad because I get a message that says 'not enough free space' but the more I delete, the less space I have.

    I cant sync my ipad because I get a message that says 'not enough free space' but the more I delete, the less space I have.  Does anyone else have this issue?

    http://support.apple.com/kb/TS1503
    http://www.apple.com/support/ipad/syncing/

  • When transferring an 18 minute iMovie from my iPad to iTunes a message comes up saying not enough disk space to send 16917 mb more space needed. How do I overcome this?

    When transferring an 18 minute iMovie from my iPad to iTunes a message comes up saying not enough disk space to send 16917 mb more space needed. How do I overcome this?

    Is there enough room on the target disk?
    Can the target disk accept files over 2Gb?

  • Code:25 Not enough disc space Help!!!!!

    Hi there,
    Can someone help me before I smash my PC up!
    Adobe you need to sort issues out with your products before you put your sofware on the market!
    For the last four days I have been trying to create a Blue Ray disc, which has been sent from Premiere CS5.2 to Encore via dynamic link.
    The project is 2hrs 36mins in length.Transcode settings are set at Transcode Default Settings. Dimenions of project are 1440x1080, Frame Rate 25.
    I have 398Gb free space on my drive and 2Gb free space on disc.
    Start to bulid the project in Encore, this takes another 10hrs to transcode, then it attempts to write onto disc then I get "CODE 25" Error not enough disc space?????? What the **** is this ?
    I have gone through the forums on here which have mentioned deleting the session files, done all this and still no luck.
    I would appreciate it if anyone has managed to solve this problem and pass their findings on to me.
    Thank you
    Wayne

    Hi Guys,
    I have finally managed to burn the project onto Blu-Ray but I have a slight issue with the Audio being slightly distorted. What would be the best settings for the audio?
    This is what I did to get it onto disc:
    Exported my project from Premiere CS5.2 through AME then imported into Encore 5.1. I did change the Administrator settings as advised and it looks like this did the trick.
    My Encore Project Settings were set at: Codec H.264, Dimensions 1440X1080, Frame Rate 25, Upper Field First.
    Export Settings from Premiere were set at:
    Video
    T.V Standard: Automatic (based on source) (PAL)
    Frame Dimensions: 1440x1080
    Frame Rate: Automatic
    Field Order: Automatic
    Pixel Aspect Ratio: Automatic
    Profile: Main
    Level: 4.1
    Bitrate Settings
    Bitrate Encoding: VBR, 1 Pass
    Bitrate Lever: High
    Target Bitrate: 18.75
    Maximum Bitrate 22.5
    Audio
    Codec: Dolby Digital
    Audio Layer: Dolby Digital Stereo
    Frequency: 48 KHz
    Bitrate Settings
    Bitrate (kbps) 192
    Do I need to up the audio bitrate for better sound as I'm getting distortion. If so what is the best setting for this?
    Thank you all for your help
    Wayne

  • "Not enough disc space" when exporting

    Hello all -
    I am running iPhoto 2.0.1 with OX 10.3.9. My hard disc has 40GB.
    Every once in a while, when I try to export a large number of photos into a desktop folder or as a slide show to QuickTime, I will get an error message saying, in effect, that there is not enough disc space to complete the export. My hard disc at those times has anywhere from 7 to 9 GB of free space. Quitting and restarting iPhoto has no effect. Neither does restarting the computer. Often times editing a photo in Photoshop Elements which then puts the edited picture back into iPhoto fixes the problem - but not always.
    More often than not, the export works fine. But these "error" situations keep occurring every now and then.
    Any thoughts?
    Thanks in advance for your replies -
    - OF

    anybody?

  • I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes  and i have to disconnct it  manually then  a error message telling me that there is not enough disc space for ipad which is not correct  any ideas folks

    i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes  and i have to disconnct it  manually then  a error message telling me that there is not enough disc space for ipad which is not correct  any ideas folks

    i have reset the ipad and restored it to no avail

  • "Safari could not download the file because there is not enough disc space"

    "Safari could not download the file because there is not enough disc space"
    I have 60gb available on my MBA and I have "read and write" privileges for the download folder. This error seemingly came out of nowhere. It doesn't matter if the file is 1gb or 10mb, I'll get the error. All I have to do is remove the .download extension and I can use the file which is complete despite the error.
    This is really annoying so any help would be appreciated.

    I never used to have a problem with creating a new folder and moving the download into it
    But you'll have a problem if you do it now.

  • Error: not enough disc space?

    I am trying to export my first project. Even though I have 133G left on my external hard drive I get the (not enough disc space) error. My project is 87 minutes long. Since my external drive has more than enough room, I guess the program is only recognizing my internal drive (which only has 4 gigs left). I have been opening the project and editing it through the external hard drive for quite some time now, so I am a bit confused and frustrated. My capture scratch discs are set to the external drive. I have been trying to figure something out with the media manager, but to be honest, that thing scares the **** out of me. I use FCP 5.0 on a G5 dual 1.8. Using NTSC DVCAM 48K. Is there something I'm missing about using the external drive? Any help would be appreciated!

    disk formatting is handled by the Disk Utility application in the /Applications/Utilities folder.
    reformatting your disc will ERASE ALL the contained data
    ... and you DONT want to format as FAT32, rather the opposite. the advice was to check that your disc is formatted as Mac OS Extended, and if not, to format it as such. you can check this by selecting the G-RAID's disc icon in the finder and pressing Cmd-I to open the info window.
    Look down to Format, just above Capacity, in the General properties.
    no doubt you will receive extra advice to ensure that the drive is not "Journaled" but this is not a big deal

  • What does error message when trying to burn DVD from iDVD mean "not enough disk space to burn the remaining assets"

    I created a DVD in idvd and now when trying to burn to DVD using external burner, I get the error message
    "not enough disk space to encode the remaining assets". I am using a brand new blank DVD.
    I have read the help info on computer but hasnt proved helpful.
    Any suggestions?

    iDVD requires a fair amount of disk space to carry out the encoding process; depending on your project, you may need to have over 25 GB free space on your startup hard drive.  How much free space do you have?

  • My computer says"not enough free space to back up iphone to computer"

    i keep recentlyl getting a notice when i connect my iphone 5 (running snow lepoard on my mac) " not enough free space on this computer to backup iphone i have 106gigs of free space, my iphone5 is 64gig help please!!!!

    Close iTunes & navigate to:
    ~/Library/Application Support/MobileSync/Backup/
    and delete everything in that Backup folder, but not the folder itself.

Maybe you are looking for

  • Release PO against contract whit limit value for USER

    Dear colleague, We work SRM server 5.5 . SP14 extended classic scenario, and we use contract management. We need to release PO against contract and we want to LIMIT the users that PO value have  to be between 60 USD as minimum order value and 120 USD

  • Wrt54gp2 -- using 110v in country with 220v

    I purchased a universal ac/dc adapter set to 12 volts, positive polarity, and a "load current" of 1000mA in order to run my wrt54gp2 in Israel.  After i plug it in, the power light will flicker for a few seconds and then go out.  Based upon my rather

  • PO Creation after CRM Sales Order Creation

    I am creating a CRM Sales Order and the moment I save the CRM Sales Order, it creates a PO in ECC. I need to find out how PO is getting triggered? When I open the CRM Sales Order it shows a PO already created for this Sales Order. Has anyone face thi

  • External hard drive not showing up in finder

    Hi, I have a LaCie Rikiki USB 3.0 1TB external hard drive for more than a year or so (probably longer than that). The hard drive has 2 partitions with one formatted as Mac OS Extended (Journaled) <named MAC> and the other MS-DOS (FAT) for windows <na

  • Custom Date Ranges

    Okay, so I'm using the Categories functionality in Numbers to create a list based on dates. In other words, I have a list in which Numbers is automatically creating categories based on the date entered in the list. The only question I have is that Nu