Try to burn cd CAN NOT DO IT. I get a system error 6

Try to burn cd CAN NOT DO IT. I get a system error 6. does any one know about this or does anyone have an idea fo where to find out about this info

Monkey_man,Welcome to Apple Discussions.
Under OS9 Error 6 was an overflow error. I can't find any confirmation that this applies to OS X too but if it does then it would suggest a Buffer Overflow during burning. This is when the computer is unable to supply the data fast enough to the CD burner and the whole process fails.
You don't give any details on whether you're using an iMac 233 with a USB1 external burner or the latest iMac IDC with DL Superdrive but here are some general principles to reduce the chances of making a coaster.
Stop whatever else you may be doing at the same time. Allow your computer to give it's full attention to the burner.
Burn at a lower speed. It you are using an application like Toast you will be offered to burn at several speeds. I suggest you try 1x and work your way up.
If you can be more specific about your set-up then there may be other things to try.
HTH
mrtotes

Similar Messages

Can not update photoshop keep getting this error Adobe Bridge CS5 4.0.5 Update   There was an error downloading this update. Please quit and try again later.     Adobe Extension Manager CS5 5.0 Update   There was an error downloading this update. Please q

can not update photoshop keep getting this error
Adobe Bridge CS5 4.0.5 Update   There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update   There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5   There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update   There was an error downloading this update. Please quit and try again later.
contacted customer service they could not help me I have previously had Photoshop on two other computers I deactivated it from one computer to put on a new one put. Can not do the updates I need them for camera Raw.
Please Help

What operating system are you using?
You can try searching for, downloading the updates yourself and running the installers:
Product updates

I've rented several movies over AppleTV, but can not download. I get a message "An error occurred loading this content. Try again later. " i've been trying for 3 days now... anyone with similar problem?

I've rented several movies over AppleTV, but can not download. I get a message "An error occurred loading this content. Try again later. " i've been trying for 3 days now... anyone with similar problem?

I have the same issue, to temporarily fix it go to Settings > General > Restart. When it restarts the movie should play. You have to do this for each movie for the most part.

Dears iTunes gives me the Payment method declined message and i bought Gift card 25$ and not work because i am in kuwait store and can not change store to USA. i try Master and visa and gift card what i can try else also i can not update free applicati

Dears
iTunes gives me the Payment method declined message and i bought Gift card 25$ and not work because i am in kuwait store and can not change store to USA. i try Master and visa and gift card what i can try else also i can not update free application. my iPhone now useless.
please help me ASAPi have to buy some application urgently.

Whether you are trying to use a Credit Card or Redeem a Gift Card... My understanding is that you have to be within the US to use the US Store and have a valid US Billing Address.

I can't upload iTunes 11.1 to my iMac I also can't upgrade OS X when I try both it say can not download to this computer with no explanation so how do I connect my iPhones to iTunes

I can't upload iTunes 11.1 to my iMac I also can't upgrade OS X when I try both it say can not download to this computer with no explanation so how do I connect my iPhones to iTunes

Oneflesh6511 wrote:
If I buy more iCloud space and back up my phones to that will I still be able to get everything from my iTunes on my phones that way?
Backing up your phone isn't really relevant. You can download items you've already purchased (from the iTunes Store on your Mac) to your phone. If you have items you didn't purchase, e.g. ripped CDs, you would have to subscribe to 'iTunes Match' ($24.99 p.a.) to be able to do the same thing with them.

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message: Cannot complete i Tunes Store request. A required iTunes com

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.

Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

HT201263 iPhone 4 is in recovery mode but iTunes can not restore it.. Says unknown error occurred (21) HELP!

I've just got back of holiday and while there my phone decided to turn itself off, it would not come back on unless I plugged it into the wall charger, it said that I had to connect it to iTunes, but being on holiday I couldn't.
So when I got home yesterday I plugged it into my laptop and the Apple logo came on, and then went off again, then back on and off again, it was doing this untill I unplugged it. So I put it into recovery mode and it said Connect to iTunes, so I did. It then said that the phone needed to be restored, iTunes started this process, 'extracting software' it said, and then once that was done it said 'preparing iPhone for restore' but then my phone disconnects itself from the laptop and then connects again then disconnects again. Then iTunes comes up with a message saying 'iTunes can not restore this iPhone 'iPhone', a unkown error occured (21)'
I have tried over and over again to try and do this but it keeps coming up with the same.
Does anyone know what's wrong with my iPhone and how I can fix it?
Thanks

And what did the error message say?

HT201210 What To Do When You Restore Your 1st Gen. iPod And iTunes Says It Can Not Be Done Due Too An Unknown Error (1)

What To Do When You Restore Your 1st Gen. iPod And iTunes Says It Can Not Be Done Due Too An Unknown Error (1)

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been not help.

hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.

- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

Hi keciakh,
To try and get the paper to feed, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error. Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely. Next, please remove and reseat all of the ink tanks in the printer. Once all of these steps have been performed, please follow the steps below to perform a roller cleaning on the printer:
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Open the paper output tray gently.
3. Select Roller cleaning.
(1) Press the MENU button.
(2) Select Setup, then press the OK button. The setup menu screen will appear.
(3) Select Maintenance, then press the OK button. The Maintenance screen will appear.
(4) Select Roller cleaning, then press the OK button.
The confirmation screen will appear.
(5) Select Yes, then press the OK button.
(6) Select the paper source to clean (Rear tray or Cassette), then press the OK button.
4. Clean the paper feed roller without paper.
(1) Follow the message to remove any paper from the paper source you selected in (6) of step 3.
(2) Press the OK button. The paper feed roller will rotate as it is cleaned.
5. Clean the paper feed roller with paper.
(1) Make sure that the paper feed roller has stopped rotating, then follow the message to load three or more sheets of A4 or Letter-sized plain paper in the paper source you selected in (6) of step 3.
(2) Press the OK button. The machine starts cleaning. The cleaning will be complete when the paper is ejected.
(3) When the completion message appears, press the OK button. The screen will return to the Maintenance screen.
Reference
To access other available functions, use the mode buttons or the MENU button.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi i can not install itune. There are the error show " Could not open key: Unknown\Components\32A7D634EB632D11CABB00087CCFBB48\DAEC106DF4E2BBB458CC2CA9C46 E3A0C.

Hi,
i can not install itune. There are the error show
" Could not open key: Unknown\Components\32A7D634EB632D11CABB00087CCFBB48\DAEC106DF4E2BBB458CC2CA9C46 E3A0C. Verify that you have sufficient access to that key. or contact your support personal.
I have tried some soution from the similar case to uninstall itune and also related components already but finally the probelm still occured.
Please you help to suggest me what can i do? I need to restore my back up data to the new iphone as the previous one got stolen.
BR,
Sirorath A.

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Getting "Can not open the file due to unknown error(FRM:0007)"

Getting "Can not open the file due to unknown error(FRM:0007)", when refreshing the local copy of Deski report from user docs.
Any assistance
Thanks,
Sasi.

Hi Sasi,
One of the reason for this error is corrupted universe.So you can try following steps and restore copy of universe and then try to import this universe and check whether it works.
1.While importing a universe, a temp file is created in the users local settings temp directory.
2. For example C:\Documents and Settings\brijones\Local Settings\Temp\0dd0b0a7 .
3. File has no extension is relatively the same size as the original universe file.
4.Rename this file to original universe name.
I hope it helps.
Regards,
Snehal

TS3988 I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message. Any ideas?

I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message. Any ideas?

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

Photoshop CC 2014 - The file can not be saved in path because an error has occurred

Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
Michael

Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

Bump
I am also having the same issue with a lot of the softwares i have downloaded. Its unable to download the initial patch update.

Try to burn cd CAN NOT DO IT. I get a system error 6

Similar Messages

Maybe you are looking for