Try to copy data from broken drive

I have external drive which had time machine backup, but the surface is broken (will never get another WD drive), what would be the best way to try and copy as much data as i can? if i use Finder it's just gets stuck, but i want to leave it overnight, so it can try to recover as much as it can?

I already went through migration assistant, what happen is that i had two accounts one for home use as my main user, and one for development. everything was backed up using time machine and i never had problems writting data. so then at some point i decided to reformat my machine and was hoping time machine will restore everyhitng, but after hours, it said IO Error, Skip or Continue, i clicked skip and ended up with only my main account (also email was there), but non of the applications were restored and no my other account. so i can of have no clue how much was restored.
i got drive genius and checked the disc it was having more then 600 bad blocks in 30% scanned which was going on for 24 hours.
So, now i got replacement disc, and want to try using my best to copy all i can, so if i remember i am missing something, i can try to recover it later.

Similar Messages

2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
Do you have a complete-drive backup of your old system?
Matt

Copying data from CD drive to HD

When trying to copy files from a CD- rom to the HD part of the data will copy and I then get the message "copy failed as part of the file "file name" could not be read or written". This happens on different discs and not always on the same file on the same disc (sometimes a file will copy and sometimes it won't).
Also, sometimes when trying to restore a disc image file using finder it attempts to verify the image and then gives the error "codec overrun".
If anyone could give me some ideas on this it would be most appreciated.

are you getting an error code -50?
If so reboot the computer and try again.

Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
    ST1000LM024 HN-M101MBB disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS23N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Caffeine    Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        20%    WindowServer
         6%    com.apple.WebKit.WebContent(7)
         4%    Safari
         3%    hidd
         1%    launchd
Top Processes by Memory: ℹ️
    1.07 GB    com.apple.WebKit.WebContent(7)
    439 MB    kernel_task
    90 MB    spindump
    57 MB    mdworker(5)
    57 MB    Safari
Virtual Memory Information: ℹ️
    4.54 GB    Free RAM
    3.46 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 04:47:31 PM    Self test - passed
    May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
    May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
Hoz

Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz

Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from

Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from LR or my drive, I keep getting the message; "Disk burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone may know if there's anything I can do. Or could it be that my computer just can't handle it? Help!!! So frustrating!! I have a PC Lenovo computer, I don't know if this makes any difference. Any ideas? Thanks so much for your help!!!

Have you burned Discs with other programs using this computer? Are you certain that you have a drive that will burn discs?

How to copy data from mac to external HD Drive

How do i copy data from mac book to an external hard disk drive?

Click on the Desktop area (the area where there are no open windows or Dock)
Look at the menu at the top next to the small Apple, it should say Finder
Click on the File men and select New Finder Window
Click on the File men and select New Finder Window (or stick in a disk, a USB, connect a hard drive and double click on the icon that appears on the Desktop)
Grab the Window by the top area by clicking and holding the mouse button down so both are side by side.
Click on the sidebar or open folders on the first window to get to where your files are
Click on the sidebar or open folders on the second window to get to where your destination is going to be
Click and drag the files or folder from one window to the other
If this occurs between volumes, it will copy
If this occurs on the same volume, it will move them
If you want to copy on the same volume, use the Finder > File > Duplicate and move the copy

Copying data from excel(more than one row) and pasting into table control

I have a requirement to copy data from excel and have it pasted it into the corresponding fields table control when the user clicks on an icon.For the first part I used a class to copy it from the clip board.By the previous process,I get the data inside an internal table, but even after trying to split the data using 'split at cl_abap_char_utilities=>horizontal_tab into table itab.' it's not working.The table and the excel file are of the same structure.
Does anyone know any cause as to why it might not work?Is there any other way to achieve my objective?
Bon

Hi,
try to get data into internal table as below
TYPES :     BEGIN     OF             ty_data          ,
            zbukr     TYPE           payr-zbukr       ,
            hbkid     TYPE           payr-hbkid       ,
            hktid     TYPE           payr-hktid       ,
            rzawe     TYPE           payr-rzawe       ,
            chect     TYPE           payr-chect       ,
            laufd     TYPE           reguh-laufd      ,
            laufi     TYPE           reguh-laufi      ,
            lifnr     TYPE           reguh-lifnr      ,
            vblnr     TYPE           reguh-vblnr      ,
            rwbtr     TYPE           reguh-rwbtr      ,    "uncommented
            unique_no TYPE           char13           ,   " Added SAP Doc. No. and current year concate in NEFT,RTGS and Fund Transfer cases
            END       OF             ty_data          .
DATA :      wa_file   LIKE LINE OF   it_file          ,
            wa_data   TYPE           ty_data          .
DATA:      it_data1 TYPE              kcde_intern WITH HEADER LINE,
           wa_data1 LIKE LINE OF      it_data1.
start-of-selection.
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
      EXPORTING
        filename                = lv_file1
        i_begin_col             = '1'
        i_begin_row             = '4'
        i_end_col               = '11'
        i_end_row               = '60000'
      TABLES
        intern                  = it_data1
      EXCEPTIONS
        inconsistent_parameters = 1
        upload_ole              = 2
        OTHERS                  = 3.
    IF sy-subrc = 0.
      PERFORM format_data.
    ENDIF.
FORM format_data.
DATA : ld_index TYPE i.
FIELD-SYMBOLS : <fs>.
DATA it_tab LIKE wa_data OCCURS 0 WITH HEADER LINE.
      LOOP AT it_data1.
        MOVE it_data1-col TO ld_index.
        ASSIGN COMPONENT ld_index OF STRUCTURE
        it_tab TO <fs>.
        MOVE : it_data1-value TO <fs>.
    MOVE it_data1-value TO p_table.
        AT END OF row.
          APPEND it_tab.
          CLEAR it_tab.
        ENDAT.
      ENDLOOP.
       it_data[] = it_tab[] .
    ENDIF.
endform.                    "format_data

How to copy data from mac to external hard

how to copy data from mac to external hard

ok - since you'll be sharing it with a PC - connect it to your windows pc - then format from there - instead of NTFS format - choose exFAT.
or, you can read the link below on how to do it in dos mode.
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/how-can-i-forma t-external-drive-in-exfat-not-in/0f6bf19a-19d6-4470-ae05-53ddf26bb476?msgId=1860 eae3-3488-4eea-8326-f87b89d9851b
once you've formatted it - you can now use it in both your macbook and windows computer.

How to Copy data from field symbol to Dynamic Internal Table

Hi,
I want to copy the data between two dynamic Internal tables . Following is the code were I have data in the field symbol wanted to transfer it to the other Internal table :
REPORT ztest.
DATA:
       gd_dref          TYPE REF TO data,
       gd_dref1          TYPE REF TO data.
FIELD-SYMBOLS: <fs1>   TYPE any,
                           <fs_wa> TYPE any,
                            <field>    TYPE any,
                            <fs_wa1> TYPE ANY TABLE. * Contains data from p_src
*Copy data from p_src to p_dest*
PARAMETERS: p_src LIKE dd02l-tabname .    * Name of Dynamic Internal table *
                         p_dest LIKE dd02l-tabname . * Name of Dynamic Internal table*
*DATA : lt_csks LIKE p_dest WITH HEADER LINE.
START-OF-SELECTION.
CREATE DATA gd_dref TYPE (p_src).
CREATE DATA gd_dref1 TYPE TABLE OF (p_src).
   ASSIGN gd_dref->* TO <fs_wa>.
   ASSIGN gd_dref1->* TO <fs_wa1>.
   SELECT * FROM (p_src) INTO TABLE <fs_wa1>.
*Write out data from FIELD SYMBOLS TO Table.
   loop at <fs_wa1> into <fs_wa>.
     do.
       assign component sy-index
          of structure <fs_wa> to <field>.
       if sy-subrc <> 0.
       exit.
       endif.
       if sy-index = 1.
         write:/ <field>.
       else.
       write: / <field>.
       endif.
     enddo.
   endloop.
*Need Logic To Copy the Data to p_dest table from <fs_wa1>.
*p_dest is a table having a similar structure to table p_src .
*Need Logic To Copy the Data to p_dest table from <fs_wa1>.
EXIT.
Thanks in Advance.

try this...
I have extended your source code and just used vbak/vbap as an example as they have some common fields like vbeln/erdat etc which corresponds with your requirement of 'similar structure' i.e. shared/common fields in both.
Cheers...
report ztest.
data:
gd_dref type ref to data,
gd_dref1 type ref to data,
gd_dref_str type ref to data,
gd_dref_tab type ref to data.
field-symbols:
<fs1> type any,
<fs_wa> type any,
<fs1_dest_str> type any,
<fs_dest_tab> type any table,
<field> type any,
<fs_wa1> type any table.
* contains data from p_src
*Copy data from p_src to p_dest*
parameters: p_src like dd02l-tabname default 'vbak',
* name of dynamic internal table *
            p_dest like dd02l-tabname default 'vbap'.
* name of dynamic internal table*
*data : lt_csks like p_dest with header line.
start-of-selection.
create data gd_dref type (p_src).
create data gd_dref1 type table of (p_src).
assign gd_dref->* to <fs_wa>.
assign gd_dref1->* to <fs_wa1>.
select * from (p_src) into corresponding fields of table <fs_wa1>
up to 3 rows
where vbeln ne space.
create data gd_dref_str type (p_dest).
create data gd_dref_tab type standard table of (p_dest).
assign gd_dref_str->* to <fs1_dest_str>.
assign gd_dref_tab->* to <fs_dest_tab>.
*write out data from field symbols to table.
loop at <fs_wa1> into <fs_wa>.
    " break-point here - can see vbeln/waers/create date/ etc move over to new structure
    " the 'common' fields of your structures - the same will happen. if they not the same name you will have to do an
    " explicit move i.e. if fieldname = xyz ....move fieldxyz to new field123....after the move-corre
    break-point.
    move-corresponding <fs_wa> to <fs1_dest_str>.
    insert <fs1_dest_str> into table <fs_dest_tab>.
**    do.
**      assign component sy-index
**         of structure <fs_wa> to <field>.
**      if sy-subrc <> 0.
**        exit.
**      endif.
**      if sy-index = 1.
**        write:/ <field>.
**      else.
**        write: / <field>.
**      endif.
**    enddo.
endloop.
" write out some dest data from the dest table build from previous loop
loop at <fs_dest_tab> assigning <fs1_dest_str>.
    do.
      assign component sy-index of structure <fs_wa> to <field>.
      if sy-subrc <> 0.
        exit.
      endif.
      if sy-index = 1.
        write:/ <field>.
      else.
        write: / <field>.
      endif.
    enddo.
endloop.

T code to Copy Data from one table to another table

Hi,
I want copy all data of one table to its copy table. Anyone knows transaction code to copy data from one table to another table.
Regards,
Jigar Thakkar.

Hi
Create a small program.
Extract data from T1 - database table and put it in one internal table - itab1.
loop the itab1 data .............
insert itab1 into tab2. (tab2 - second database table)
endloop.
try this....
hope it works....

Will upgrading to windows 10 delete the data from all drives

A notification for upgrade to windows 10 is available for my mentioned notebook. I've never upgraded to a newer version of windows earlier so i wanna be sure if the upgradation would delete all the data from each drive(i.e. windows drive"c" along with D,E and F)) and what is the total amount of NET-DATA(in MB) will be used for Upgrading online..so that i might not run out of data balance during upgradation process. One more thing..currently the windows 10 logo has arrived at the bottom right of my task bar. Do REPLY asap!!!

Always back up your data when upgrading! It will only if you tell it to during setup. I would not upgrade untill you have backed up important data manually (copy>paste) to another external hard drive.

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

Copy data from one Table to another Table

How can I copy data from one Oracle Table to another Oracle Table on a different server? Question 2: How can I clear all of the data in one Table with a single SQL script?
Thanks...

Question 1:
I assume you have the privileges. If you don't, ask the DBA to give them to you. Then
1. Login to database_source (It could be either the source or the target. Let's assume it's the source.)
2. Create a database link to database_target: CREATE DATABASE LINK link_to_database_target CONNECT TO myuserid IDENTIFIED BY mypassword USING 'database_target'; Note the single quotes.
3. Copy the table data: INSERT INTO targetowner.mytable@link_to_database_target SELECT * FROM sourceowner.mytable; COMMIT;
Question 2:
You have two options, but you may not have privileges for both.
Option 1:
DELETE FROM tableowner.tablename; COMMIT;
Advantage: Since this is a DML (Data Manipulation Language) statement, you have to commit the transaction. Also, the data will be gone but the table size is NOT changed, so it's ready for accepting replacement data. DML statements can simply be executed not only from SQL scripts, but from PL/SQL scripts as well.
Disadvantage: Slow, because all record deletion is logged, so you can recover from it by issuing a ROLLBACK; instead of the COMMIT; above. The table size is NOT changed, so if you are short of disk space or tablespace space, you have not resolved the issue.
Option 2:
TRUNCATE TABLE tableowner.tablename;
Advantage: Since this is a DDL (Data Definition Language) command, you do NOT have to commit the transaction. (DDL commands automatically commit both before and after their execution.) The table size will be changed back to the initial extent size which is the minimum size a table can have and can only be set when the table is created. If it needs to be changed, the table has to be dropped and recreated with a different initial extent size. The statement execution of this command is not logged, therefore it's much faster then the DELETE.
Disadvantage: No rollback. Being a DDL, this command cannot be executed straight from PL/SQL. If you need to issue this within PL/SQL, you will have to use dynamic SQL.

Copying data from one table to another table thru java

Hi
I have to copy data from table emp in Database A to table emp in Database B. My input would be table name and number of rows to be fetched. these rows i need to insert in table B.
The problem over here is I won't be having any info. of table emp i.e the number of columns it has and their type.
So is their any way i can copy the data from one table to other without having the info abt the number of cols and their type.
TIA

Cross post - http://forum.java.sun.com/thread.jspa?threadID=5169293&messageID=9649839#9649839

Copy data from one table to another

Hello everyone,
I have a student table with fields sno, sname. I created another table student1 with same fields sno, sname and with one new field class.
Now i want to copy data from sno, sname of student table to sno, sname of student1 table when the class field in styudent1 has no data i.e., its null.
Could any one let me know how to do this?
Thanks,
Prathima

i want to copy data from sno, sname of student table to sno, sname
of student1 table when the class field in styudent1 has no dataSo what is the join condition? What column in STUDENT1 tells us what row in STUDENT to copy?
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/

Try to copy data from broken drive

Similar Messages

Maybe you are looking for