Trying (and failing) to require authentication for Wikis
Hi folks. Got our Wiki Server up and running finally. However right now it's wide open to anyone on our LAN to post or edit Wikis. Whenever we specify that only authenticated users or only members or our Wiki group can post, we DO get the login window - only no logins (with the exception of the OD admin) are allowed through. We've checked and re-checked permissions 1000 times, tried every trick in the book - must be doing something knuckleheaded, any advice or thoughts would be great.
Thanks!
Jesse
Server Admin -> web
select the website in question, make sure it is checked as enabled
Server Admin -> web -> Web Services
make sure the users/groups that require access are displayed, otherwise click plus sign and add them
Check Wiki and Blog
etc...
save
Workgroup Manager -> Groups Icon
Select the correct group
Select the website that you want (www.your_domain.com) from the popup menu where it says : Enable the following service...
Check Wiki and Blog
etc...
save
Server Admin -> web
Stop
Start
That should do it...
If you try to access the wiki on localhost it won't work, you need to go to the actual domain
http://www.your_domain.com
on an intranet if you are using private dns you can create a test website for example
DNS -> your-server-name.mac.private. -> 192.168.1.150
and you select the correct private site, you can
http://your-server-name.mac.private and you should see it fine
Best of luck...
Similar Messages
-
I have tried and failed to copy my iTunes library and playlists from my Windows 8 desktop to my Windows 7 laptop using an external hard drive. Can it be done? Help would be appreciated. I have followed instructions found online but the library of music doesn't pull in. Thanks!
NateMigrate an iTunes library from one computer to another
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entireiTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one, with ratings, play counts, playlists etc. preserved. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd normally recommend method 1 since it establishes an ongoing backup for your library and unlike copying with Windows Explorer the process can be resumed if it is interrupted and it will continue to the next item if there are any read/access errors.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See Make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2 -
ISP requires authentication for outgoing email
On my Samsung Droid, my ISP requires authentication for outgoing email. I don't see this as an option and so all my supposedly sent items are sitting in my Outbox. Anyone else have this issue? My Gmail and Hotmail accounts work just fine. Thx
110/25 or.....
POP3/IMAPAccount
ServerType
Incoming Server
Incoming Port
Usesecureserver
VerifyCert.
Outgoing Server
OutgoingPort
Use secureserver
VerifyCert.
Aim.com
IMAP4
imap.aim.com
993 (or 143)
Yes
Yes
smtp.aim.com
465 (or 587)
Yes
Yes
aol.com
IMAP4
imap.aol.com
993 (or 143)
Yes
Yes
smtp.aol.com
465 (or 587)
Yes
Yes
Aim.com
POP3
pop.aim.com
995
Yes
Yes
smtp.aim.com
587
Yes
Yes
aol.com
POP3
pop.aol.com
995
Yes
Yes
smtp.aol.com
587
Yes
Yes
att.net
POP3
pop.att.yahoo.com
995
Yes
Yes
smtp.att.yahoo.com
465
Yes
Yes
bellsouth.net
POP3
pop.att.yahoo.com
995
Yes
Yes
smtp.att.yahoo.com
465
Yes
Yes
charter.net
IMAP4
mobile.charter.net
993
No
No
mobile.charter.net
587
No
No
charter.net
POP3
mail.charterinternet.com
110
No
No
smtp.charterinternet.com
25
No
No
comcast.net
POP3
mail.comcast.net
995 (or 110)
No
No
smtp.comcast.net
587
No
No
cox.net
POP3
varies by location
995 (or 110)
Yes
Yes
varies by location
587 (or 465)
No
No
earthlink.net
POP3
pop.earthlink.net
110
No
No
smtpauth.earthlink.net
587 (or 25)
No
No
excite.com
POP3
pop3.excite.com
110
No
Yes
smtp.excite.com
25 (or 587)
No
Yes
flash.net
POP3
pop.att.yahoo.com
995
Yes
Yes
smtp.att.yahoo.com
465
Yes
Yes
gmail
IMAP4
imap.gmail.com
993
Yes
Yes
smtp.gmail.com
465
Yes
Yes
Go Daddy Accounts
POP3
pop.secureserver.net
995 (or 110 w/out Secure connection)
Yes
Yes
smtpout.secureserver.net
465 (or 25 w/out Secure connection)
Yes
Yes
hotmail
POP3
pop3.live.com
995
Yes
Yes
smtp.live.com
587
No
Yes
lycos.com
POP3
pop.mail.lycos.com
110
No
Yes
smtp.mail.lycos.com
25 (or 587)
No
Yes
mac
IMAP4
mail.mac.com
993
Yes
Yes
smtp.mac.com
25 (or 587)
No
No
me
IMAP4
mail.me.com
993
Yes
Yes
smtp.me.com
25 (or 587)
No
Yes
mindspring
POP3
pop.mindspring.com
110
No
No
smtpauth.earthlink.net
587 (or 25)
No
No
msn.com
POP3
pop3.live.com
995
Yes
Yes
smtp.live.com
587
No
Yes
netzero.net
POP3
pop.netzero.com
110 -
C150 The case application tried and failed 3 times...
Hi All,
Requesting some help with the IronPort C150 Alert below. Thanks for any suggestions, pointers, or experience you can provide regarding this issue.
The Warning message is:
The case application tried and failed 3 times to successfully complete an update. This may be due to a network configuration issue or temporary outage.
Version: 7.5.1-102
Thank you,
--LikoHi again,
Luckily I found this post which was not located using the search utility.
'CASE updates incorrectly timeout on 1U appliances'
--Liko -
How can I add a Epson Stylus SX445w to my Mac Book Pro
This is the second one I've tried and failing miserably...it should be so simple...I've installed poken to the help line at Epson and they say it's down to Apple !! Somebody please help meYes I did everything that I was instructed to do!
Cheers
Joyce -
How to set up and test the Basic Authentication for HTTP protocol
Hi,
I tried configuring the password based Basic Authentication for sending xml document using ebMS - HTTP protocol. I set username and password while configuring the transport server for both trading partners. I want to know, is that sufficient for basic authenticaton. When I open the URI http://localhost:7778/b2b/transportServlet, it is not asking any authentication (username/password). Please note that I have not used SSL certificate. Anyone please help me out to configure Basic authentication.Hi Ramesh,
Thanks for ur response. Could you please tell me where to set the Additional Transport header : authtype-basic#realm=myRealm(in which property file). In enqueue code, I could see the following attributes
queue
msgID
replyToMsgID
from
to
eventName
doctypeName
doctypeRevision
msgType
payload
attachment
subscriber
Is it possible to set username/password in the enqueue attributes?
Do i need to add username/password and Transport header in the input XML and defined that elements in xsd? -
I recently turned my iPhone in to a Genius bar and had it repaired under the iPhone 5 Sleep/Wake Button Replacement Program. Congruent to that repair, I had to do a factory reset (contetn and settings). Once I got it back, I restored from iCloud backup. When I re-opened the podcats app, it began to redownload all old episodes I had on the iPhone before.
Of these many podcasts, 5 episodes were from 2 defunct podcasts no longer on the iTunes store. It gets download errors on these episodes. I can get it to stop retrying (and failing). I have tried canceling the downloads. I have tried deleting the episodes (and the podcasts). I have tried deleting them then canceling the downloads. I have tried marking them as played and canceling the downloads. I cannot get them to be purged from the catalog and not try to redownload.
Outside of someone with access to the iCloud backend who can remove the associations, I don't know if anyone here can help me. But I am open to suggestions.
Thanks.
(also perhaps of relevance, the period between the wipe and restore included the release of the 2.0 app )Hello DonaldGuy,
It sounds like you have some podcast subscriptions that are constantly trying to download but they are not in the iTunes Store anymore prompting an error message. You can use the edit button in the susbcriptions list to delete the subscribed podcasts in question, to prevent the error messages from happening:
Podcasts at a glance
http://help.apple.com/iphone/7/#/iphbaeb5b5cb
Then I would backup to iCloud to update the most current iCloud backup to reflect this:
Back up to iCloud
If you're using iCloud, it can automatically back up your data if you've chosen this option. You can verify your iCloud backup and make sure that it's up to date by following these steps:
Tap Settings > iCloud > Storage & Backup.
Turn on iCloud Backup if it's off.
Tap Back Up Now.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Does requiring authentication for external drives, via profiles, actually work?
USB and Firewire drives still mount after applying a profile that requires authentication. Use to work with MCXs. Is this a known issue with ML?
Cheers,
ErnestoBill-
If all you are doing is managing 30 GB of pre-existing JPEGs in 2007 iVMP is probably superior. However I would venture a guess that you also intend to capture new images with your DSLR. For that you very much want Aperture. And IMO moving to 2008 and beyond Aperture's potential far exceeds iVMP's.
And you did note that iVMP is now owned by MS; not good.
Solving an entire workflow is not something easily done in a few forum paragraphs. I strongly recommend that every DSLR photog with adequate computer hardware first spend $33 and work through the tutorial CD Apple Pro Training Series: Aperture 1.5 (Apple Pro Training) by Orlando Luna and Ben Long (Paperback - Oct 18, 2006).
Have the CD and a MacIntel with 2 GB or preferably more of RAM prior to ordering the Aperture trial so you don't waste time of the 30 day trial. Note that the value is in the tutorial, not in using the book as a manual. Due to the limited hard drive capacity, anyone with a laptop should focus on developing a "Reference Masters" workflow.
You say JPEGs, no RAW. I would in the strongest possible terms recommend that you consider switching to a RAW workflow. In addition to allowing extraordinary post process editing, RAW image files contain much more image data. I believe that your DSLR will capture up to a dozen RAW pix before the buffer fills. Shooting JPEGs is a serious under utilization of a capable DSLR.
-Allen Wicks -
Upon "export media", CS4 tries and fails to load import/export apps
Now that I've reinstalled CS4 PPro over the trial version-turned-purchased-version of Premiere Pro (that dumb, known Adobe defect where CODECs other than DV are missing on the web purchased version), everything is working well except - when I go to export a sequence to Media Encoder, it says that it must reinstall first the exporter app, it fails on that, then it tries to reinstall the importer app and fails at that too, at which time it opens Media Encoder and seems to perform fine.
Why those obnoxious and very time consuming attempts to reinstall the importer/exporter apps? Any solution?
Thanks!
JimYes, but you will not like it.
Uninstall everuthing Adobe, run the Cleanscript 2 or 3 times, then reinstall. Your problem is caused by not uninstalling the trial completely before installing the full version. -
Please help a desparate man, smile. A computer tech, , put ubuntu on my computer and installed firefox several years ago. Now when I try to update it to the new version, it wont update. I do see a note on the firefox instructions that if linus was placed on my computer with a distribution package, I think it said, whatever a distribution package is, I have to wait for an updated version, I think it said. I dont know if the tech who installed it used a distrution package and he is gone elsewhere and I cant ask him. I am a computer imbecile so thats all I know, and I cant get to many sites now because they only take updated firefox, PS I dont see any word help to click, where is this word located if I ever need to use it? Also lately after I tried to update firefox, not before, when I try to download anything to view that thing that starts with a p, three letters, like a medical article, it wont take me there, I merely get a box saying I am trying to dowload it, maybe that is linked to me not having an updated version of firefox. Please remember in your answer, I know almost nothing about computers. Thanks a lot. .
Steve LordUbuntu/9.04 (jaunty) is an old version of Linux from 2009. You're gonna need to upgrade to a newer operating system to use a more recent version of Firefox.
My advice is to consult with the Ubuntu support forums to find out if your PC can support the latest version of Ubuntu, or if you should switch to a different "flavor" of Linux.
http://ubuntuforums.org/ -
Trying (and failing) to read XML multi-dimensional data array
i.e.
<mpp:Vehicle>
<mpp:Vehicle_Rgtrn_Ref>?</mpp:Vehicle_Rgtrn_Ref>
<mpp:Vehicle_Model_Code>?</mpp:Vehicle_Model_Code>
<mpp:DrivingRestrictionCode>?</mpp:DrivingRestrictionCode>
<mpp:Object_Mnfct_Year>?</mpp:Object_Mnfct_Year>
<mpp:Building_Number_const>1</mpp:Building_Number_const>
<mpp:Building_Name>The Slums</mpp:Building_Name>
<mpp:Sub_Building_Name>Flat 1</mpp:Sub_Building_Name>
<mpp:Postcode_Area_Ref>???? ???</mpp:Postcode_Area_Ref>
<mpp:Covers>
<mpp:Cover>?</mpp:Cover>
<mpp:Cover>?</mpp:Cover>
<mpp:Cover>?</mpp:Cover>
</mpp:Covers>
</mpp:Vehicle>
<mpp:Vehicle>........
I'm currently trying to create a web service to read a SOAP message containing such XML. When reading the message, EDQ converts the singleton nodes in each Vehicle node group to a stringarray but only provides the last Cover node in each Vehicle in a stringarray. I'm not in control of the XML structure so trying to get the supplier to concatenate each vehicles covers into a delimited list within a single node may be a battle.
Anybody else ever encountered this? Is it possible or am I flogging a dead horse trying to achieve this.
Thanks in advance.
JonHi Richard,
Thank you for your suggestion to my colleague Jon regarding -multi in option. As he said, w
hat we currently get when we have a SOAP message containing <Covers><Cover>A</Cover><Cover>B</Cover><Cover>C</Cover></Covers> is an EDQ stringarray containing the value {C}.
I've tried your suggestion
and ran the wsdlizer with the -multi in option but the wsdlizer fails with the following error:
H:\Workspaces\svn\edqTrunk\EDQ\WebServices\WSDL>java -jar wsdlizer.jar -o lv-mpp-query-request-ws.jar -multi in MPP_Query_Request_Service.wsdl
INFO: 10-Sep-2013 13:24:07: wsimport succeeded
Problem encountered during annotation processing;
see stacktrace below for more information.
com.datanomic.director.webservices.apt.ScannerException: multi-record request element must contain single nested list
com.datanomic.director.webservices.apt.Scanner$Processor$Servicer.makeDef(Scanner.java:747)
etc.
SEVERE: 10-Sep-2013 13:24:07: APT scan failed
Unfortunately, the error message is not very helpful to me. Do you know what it is whingeing about? I've also tried running the wsdlizer on our old wsdl files, i.e. before we introduced the parent tag <Covers> around <Cover>, but this failed with the same result when running with the -multi in option
The wsdl file, with most of the XML tags removed for clarity and brevity, looks like this:
<wsdl:definitions xmlns:schema="http://xxxx/MppService" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://xxxx/MppService" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" name="LV" targetNamespace="http://xxxx/MppService">
<wsdl:types>
<xsd:schema xmlns="http://xxxx/MppService" xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xxxx/MppService">
<xsd:element name="request">
<xsd:complexType>
<xsd:sequence>
<xsd:element minOccurs="1" name="CorrelationUID" type="xsd:string"/>
<xsd:element minOccurs="1" name="RequestorName" type="xsd:string"/>
<xsd:element minOccurs="1" name="Brands" type="brandType"/>
<xsd:element minOccurs="1" name="Parties" type="partiesType"/>
<xsd:element minOccurs="1" name="InsuredObjects" type="insuredObjectsType"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="response">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="CorrelationUID" type="xsd:string"/>
<xsd:element name="MPPResponseUID" type="xsd:string"/>
<xsd:element maxOccurs="unbounded" minOccurs="1" name="Brand" type="schema:brandsType"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="brandsType">
<xsd:sequence>
<xsd:element name="BrandCode" type="xsd:string"/>
<xsd:element name="ResponseMPD">
<xsd:complexType>
<xsd:sequence>
<xsd:element minOccurs="0" name="FunctionAvailable" type="xsd:string"/>
<xsd:element minOccurs="0" name="MessageCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ResponseCI">
<xsd:complexType>
<xsd:sequence>
<xsd:element minOccurs="0" name="FunctionAvailable" type="xsd:string"/>
<xsd:element minOccurs="0" name="MessageCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="brandType">
<xsd:sequence>
<xsd:element maxOccurs="2" minOccurs="1" name="BrandCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="partiesType">
<xsd:sequence>
<xsd:element maxOccurs="unbounded" minOccurs="1" name="Party" type="schema:partyType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="partyType">
<xsd:sequence>
<xsd:element minOccurs="0" name="PartyUID" type="xsd:string"/>
<xsd:element minOccurs="1" name="RoleCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="insuredObjectsType">
<xsd:sequence>
<xsd:element maxOccurs="1" minOccurs="0" name="Properties" type="schema:propertiesType"/>
<xsd:element maxOccurs="1" minOccurs="0" name="Vehicles" type="schema:vehiclesType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="propertiesType">
<xsd:sequence>
<xsd:element maxOccurs="unbounded" minOccurs="0" name="Property" type="schema:propertyType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="vehiclesType">
<xsd:sequence>
<xsd:element maxOccurs="unbounded" minOccurs="0" name="Vehicle" type="schema:vehicleType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="propertyType">
<xsd:sequence>
<xsd:element minOccurs="0" name="BuildingNumber" type="xsd:string"/>
<xsd:element minOccurs="0" name="BuildingName" type="xsd:string"/>
<xsd:element maxOccurs="1" minOccurs="0" name="Covers" type="schema:coversType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="coversType">
<xsd:sequence>
<xsd:element minOccurs="1" name="Cover" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="vehicleType">
<xsd:sequence>
<xsd:element minOccurs="0" name="VehicleRegistrationMark" type="xsd:string"/>
<xsd:element minOccurs="1" name="ABIBrokernetCode" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
<wsdl:message name="request">
<wsdl:part name="parameters" element="schema:request"/>
</wsdl:message>
<wsdl:message name="response">
<wsdl:part name="parameters" element="schema:response"/>
</wsdl:message>
<wsdl:portType name="LVEI">
<wsdl:documentation>Operations</wsdl:documentation>
<wsdl:operation name="process">
<wsdl:documentation>Process a query request</wsdl:documentation>
<wsdl:input message="schema:request"/>
<wsdl:output message="schema:response"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="LVBinding" type="tns:LVEI">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="process">
<soap:operation soapAction="http://xxxx/MppService"/>
<wsdl:input>
<soap:body use="encoded"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="LV-MPPQRS-v01">
<wsdl:port name="LVEndpoint" binding="tns:LVBinding">
<soap:address location="https://xxxx/LV-MPPQRS-v01"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
A colleague created the wsdl, it's been checked a number of times but no one can find anything dodgy that might account for the wsdlizer error we're getting. So we're a bit lost now, the data coming in to our EDQ process is incomplete, which makes further development of out EDQ processes somewhat challenging.
Any help would be greatly received. Also happy to send any more information you may require.
Jules -
Trying (and failing) to install Adobe AIR
checking for pow in -lm... yes
checking for zlibVersion in -lz... no
configure: error: zlib not installed
Aborting...
error: Build failed
I'm using Arch64, so my zlib is x86_64, but I do have the lib32-zlib from [multilib]. Do I need a bin32-zlib?
I'm trying to install bin32-adobe-air from AUR, by the way. It requires lib32-libpng12.
EDIT: A recent update has solved this problem. But now the extraction of AdobeAIRSDK.tbz2 keeps failing.
http://pastebin.ca/1985755
Last edited by YAOMTC (2010-11-09 03:53:59)If you are in the USA and other places with iCloud you can redownload then by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can always redownload apps at no additional cost as long as you are signed into the same iTunes account that originally purchased them. -
[systemd] Requiring authentication for shutdown/reboot
I have completed most of my migration to systemd but am still running init scripts. I am having an issue where I am asked for authentication when I try to shutdown or reboot the computer. This user is in the groups 'wheel' and 'power'.
It appears that is related to the org.freedesktop.login1.policy PolKit policy. Since this is a laptop I have set "allow_active" to "yes" for both shutdown and reboot, however I am still asked to authenticate. My policy file and my logind.conf for systemd: https://gist.github.com/4154750
Also, in order to perform the shutdown I am using gnome-session-quit launched from an XMonad shortcut.Active=no so I guess I am not in an Active Session. What does that mean?
And yes I am booting with systemd, adding the appropriate "init=...." to the kernel line.
EDIT: I am reading the wiki page here - https://wiki.archlinux.org/index.php/ConsoleKit so I kind of understand that my session is not properly starting with PolKit
After migrating to systemd I did "systemctl enable gdm" and was able to get back into my system (the original issue that prompted moving to systemd was that GNOME quit working).
So my login manager is GDM, my desktop environment is GNOME, and my window manager is XMONAD. Hopefully these details will help get me on track.
thanks
Last edited by ciarlill (2012-11-28 14:25:29) -
Error 1607 Help...have tried and failed
I'm trying to install iTunes 6.0 and the "Error -1607: Unable to Install InstallShield Scripting Run Time" message comes up every time. So I went to the guide that b noir suggested and attempted the first solution on "http://consumer.installshield.com/kb.asp?id=Q108158". (the isscript thing) so I went through the steps and looked at the file version of the installation file and found it to be 6..... and nothing was said about anything beginning with 6. I ran through everything else on the page just for kicks but none of it worked. so I'm guessing that could be the problem and I was hoping someone could help me out. otherwise I have no idea what's wrong with this thing.
hi Garrick!
"http://consumer.installshield.com/kb.asp?id=Q108158". (the isscript thing) so I went through the steps and looked at the file version of the installation file and found it to be 6.....
just checking. were you right-clicking on the
b itunessetup.exe
file itself?
there's actually a much better version of that particular document here (must remember to warn people about this in future):
http://consumer.installshield.com/kb.asp?id=Q108322
step 1 d should guide you through the version-checking procedure that works for itunes installs.
many thanks for the heads up! keep us posted.
love, b -
No hibernate option available, several solutions tried and failed
I've gone to power options-choose what the power button does-change settings that are currently unavailable, and it doesn't work.
I've ran powercfg -h on from an admin command prompt, and it doesn't work.
I've edited the registry to turn "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\hibernateEnabled" to 1, and it doesn't work.
HELP!Hi,
To use powercfg.exe /hibernate on command enable hibenate, if failed, Is there any error message?
If sleep or hibernate aren't available, it might be for one or more of the following reasons:
1. Your video card might not support sleep. Update the driver for your video card.
2. Some settings are managed by your system administrator.
3. saving states are turned off in your computer's basic input/output system (BIOS). To turn on sleep, restart your computer, and then enter the BIOS setup.
Roger Lu
TechNet Community Support
Maybe you are looking for
-
Unhandled exception in ControlBasics-WPF
Hello, after long use of ControlBasics-WPF unhandled exception appears. This exception is very nondeterministic. Sometimes application crash after 5 minutes sometimes after 1 hour. I noticed that exception appears often when people come in and out of
-
VZ Messages contacts not displaying
When I receive a message from one of my contacts the notification on the lock screen shows the message with the sender's number but does not show the name. When I open the VZ Messages app the contact names show properly. How do I get the lock scree
-
Password got removed, need to reset it
After getting my MacBook back from the repair shop, I noticed they removed my password for my main account. This password allowed me to install software that required password authentication. I was given the following instructions to reset it: 1. Res
-
Having trouble getting into editor
I recently uninstalled elements 11 and bought topaz simplify. I have reinstalled elements 11 and wanted to access the topaz plug in. But the editor only opens to the point of enelessly scanning for plug ins and not allowing anything else.
-
Why won't application launch?
Why won't application launch?