Trying the register a serial number

HI All,
I downloaded a trial version of Lightroom 5 and had to do all the creative cloud stuff. I really enjoy the software, but I didn't want a subscription, so I bought a CD of the program from Amazon. When I try to register the software with the serial number that came with the cd, I get an error. Tech support has been of little help until this point.
Any help would be greatly appreciated.

Once I finally got time to sit down, I took a crack at uninstalling it and reinstalling it. It worked. I had tried this prior to posting, but I think I must have only un-installed either creative cloud, or Lightroom. Because your suggested answer was one I had seen posted elsewhere, I thought I needed to try again. I took care to uninstall both and then restart the computer. Upon re-installation, I had no problems registering the serial number. It even picked up the old catalog right where I had left off. One update, and I am exactly where I was trying to be - A current version of lightroom with a license and a CD properly installed and registered (not a subscription). Thank you!

Similar Messages

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.

Contact Adobe support:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I cannot register my serial number emailed to me after the purchase of cs6 extended

I cannot register my serial number emailed to me after the purchase of cs6 extended. The istall went fine but registration says invalid serial number.

Hey beccac85068042,
Adobe will provide you the serial number only if you are a registered user.
Please refer the following link to know more on registration for Adobe products:
Adobe product registration FAQ
You might Contact Customer Care and seek help on the same.
Regards,
Anubha

Got a new motherboard, My Creative Suite thinks it's a new computer. Can't register my serial number, because it can't connect to the internet. Internet works fine. What do I do?

Got a new motherboard after my PC crashed, because my old one was defect. Now my Creative Suite thinks it's a new computer. I can't register my serial number, because it can't connect to the internet, but internet works fine. What do I do? My operating system is windows 7, System is Intel Core i7-4790 / 16 GB RAM

Contact support by web chat to reset activations and refer to this:
Sign in, activation, or connection errors | CC, CS6, CS5.5
Mylenium

HT1349 I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software.

Desactive the option "create serial number automatically"

Hello
I´am using serial numbers for certain materials with Stock check, and in my serial number profile the procedure MMSL (maintain goods receipt and issue doc.) is set the serusage 03 (obligatory).
I need this configuration, so I can control stock for which serial number, and this serial number can´t be set automatically, it was to be write down by the users.
The problem I have is that when I´am doing a material movement, for example, mvt 501 in MB1C or in MI04 to register the inventory count, the series number is obligatory has I want, but the system gives the user to "create automatically serial numbers", and when the user do that is creating new serial numbers sequential by the number range I gave. What I Want to know is:
Is there any way to disable this option of "create serial numbers automatically???
Thank you very much for your help
Best Regards
Carla

MAHA REDDY wrote:
Hi All,
I am trying to generate the serial no on the form by this coding
i have taken non data base field SI_NO
IF :system.record_status IN ( 'NEW' ,'INSERT' ) THEN
:XXEAM_JOB_TEMPLATE_LINES.SI_NO := :System.CURSOR_RECORD ;
END IF ;
If I am deleteting a record from the middle of the record the sequence on the serial number does not gets changed eg. if there r 5 records if I delete 3 record then the sequence of serial number will become 1,2,4,5 where as it should become 1,2,3,4
same is the issue if I add a record in the middle the serial number gets duplicate eg if there r 5 record and i am adding another record after 2 then its coming like this 1,2,3,3,4,5 where as it should come like this 1,2,3,4,5,6
Hi Maha,
You can use PRE-RECORD trigger at block level and if you write
:TXT_SL:=:system.trigger_record;you will get serial no. After deleting or adding it will not re-organize your serial no un till you navigate at other record. If you navigate through out the record, it will
re-organized.
If you want it dynamically, you need to do a loop after any interaction in records.
Hope understand..
Hamid

I am trying to locate my serial number to my new computer.

i am trying to locate my serial number to transf my photoshop cs6 to my new computer. Where can I find that? Thanks,
tammy

If you registered your CS6 software when you first installed it, it should be available thru your Adobe account online.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

My 3rd iphone. 3GS I did not buy from an apple store, how do I register this serial number with my apple account? it is already sync to it and will preform every function except email to my home computer. It says apple ID disabled

My 3rd iphone is a 3GS. I did not buy this one from the apple store, how do I register this serial number with my apple account? it is already sync'd and it and will preform every function except email to my home computer. It says apple ID disabled, also will not update my apps, same promt apple id disabled.
anyone know where I can go to register this phone? Thanks

https://register.apple.com

SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
I am trying to install Acrobat XI Std silently by SCCM.
I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
Is there a way to check the language specified for ym serial number?
Bryndon

Update on a couple of details:
@Sabian,
Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
@Sebastian
I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

My iPhone was stolen and I have the IMEI and serial number. Will I still be able to find it?

My iPhone was stolen and I have the IMEI and serial number. Will I still be able to find it?

Thanks. Yes. But somehow it's already turned off by the thief. I am just hoping he goes to an area with free wifi to transmit the lost phone mode. I'm giving it a few weeks and i hope that the new iOS 7 function will work. That they won't be able to reset my phone without my apple id & password. I just wish I downloaded the app iHound before.
Oh and I called up our national telecommunications commission and they'll be able to disable my phone's function through my IMEI.

How to change the status of Serial number

Hi Experts,
Would you please help in solving this problem.
How to change the status of Serial number?
I have material stock in a storage location: recieved from Intercompany through outbound delivery, when PGIed material document is created when I am checking the serial numbers of the recieved ones status of the serial numbers are ESTO, I want that into AVLB.
How can we do that?
Regards
Sri

Hi,
Go to IQ02 on Header tool bar you will find edit(2nd option on header tool bar) => edit manually=> Click from Customer=> and then to Stock you will find the expected results...
Generally Serial number Status use to change along with the movement of material linked with that serial number... So if you are changing serial number with manual trasaction then please remove all the details from IQ02 like plant storage location Batch and master batch so that i will not provide you error while doing next transactions.
Regards,
Ninad Kshirsagar

I was directed to adobe to download CS4 on my new iMAC after hardware failure on PC. The valid CS4 serial number for the PC is not recognized by Adobe, even though I downloaded all the software successfully. They gave me a free 30 day trial.........Does

I was directed to adobe to download CS4 on my new iMAC after hardware failure on PC. The valid CS4 serial number for the PC is now not recognized by Adobe, even though I downloaded all the software successfully on the new iMac.. They gave me a free 30 day trial on the new iMAC.........Does this mean I have to spend a lot of money to update and activate the latest CS release on the new machine ??????

Purple Lobster your Creative Suite 4 serial number is for Windows or Mac only. If you were previously using it on Windows then it is likely you have a Windows license. You can verify by checking your serial number at http://www.adobe.com/. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
If you wish to run Adobe Creative software on your new iMac then I would recommend a Creative Cloud complete or single application membership. You can find more details at https://creative.adobe.com/plans. There is also a 30 day trial available for the Creative Cloud if you wish to evaluate the newest versions of the Adobe Creative applications.

I can't register my serial number , how i do?

i cAN'T USE MY SERIAL NO. THAT SEND TO ME AFTER I PAID ALREADY

kevilay2013 wrote:
is this possible?
Yes.
Open iTunes on the computer you used to sync the iPod and select Preferences… from the iTunes menu.
Select the Devices pane. Position the cursor over any of its backups. The iPod's serial number will appear in a popup window.

Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
It does the same thing when using msi with the command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
Here is my setup.ini file
[Startup]
RequireOS=Windows XP
RequireMSI=3.1
RequireIE=7.0.0000.0
Require64BitVC10RT=1
CmdLine=/spb /rs /sl"1036"
[Product]
msi=AcroPro.msi
vcrtMsi=vc_red.msi
vcrtDir=VC10RT_x64
Languages=1033;1036
2052=Chinese Simplified
1028=Chinese Traditional
1029=Czech
1030=Danish
1043=Dutch (Netherlands)
1033=English (United States)
1035=Finnish
1036=French (France)
1031=German (Germany)
1038=Hungarian
1040=Italian (Italy)
1041=Japanese
1042=Korean
1044=Norwegian (Bokmal)
1045=Polish
1046=Portuguese (Brazil)
1049=Russian
1051=Slovak
1060=Slovenian
1034=Spanish (Traditional Sort)
1053=Swedish
1055=Turkish
1058=Ukrainian
1025=English with Arabic support
1037=English with Hebrew support
6156=French (Morocco)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=3
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
Does it means that the serial number provided was invalid for deploying ?
NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that. For now it's only not working at the command line.
Another important point is that the install works great without customization ! If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
So what goes wrong ?

Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
I retried installing the initial package in French on a Windows 7 English and the software installed properly in French.
As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
That gave me the cue I needed to know. I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
I ran again the same command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
And everything works fine.
NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first. Otherwise the installation failed without any error message.
Thanks again to you for your good hint,
Bob

Trying the register a serial number

Similar Messages

Maybe you are looking for