Trying to access iCloud acct, can't remember password to an earlier email!

When I first set up my iCloud acct. on my iPhone 5s (7.1.1), I had a different email address than I do now. In trying to log in, it asks me for a long-forgotten password to this old email.
How can I resolve this???? I can't even delete the account because it requires that same old password first before I can turn off "Find My Phone."
HELP!!

Hi dorothy,
You need to follow these instructions to get your iCloud up to date:
1.     Go to Manage your Apple ID, sign in with your current Apple ID and Edit the ID back to the old email address. This is temporary. Do NOT verify it, do NOT change the password: Apple - My Apple ID
2.     Go to Settings>iCloud and scroll down to the bottom of the page and click on Delete Account. Type in your current Apple ID password when asked. Follow the prompts to delete the iCloud account from your device
3.     Go back to Manage your Apple ID and sign on with the old email address/current password, and Edit the ID back to the new email address (you may have to verify it again)
4.     Go back to Settings>iCloud and sign onto iCloud with the new Apple ID
Cheers,
GB

Similar Messages

  • I want to change my iCloud account on my iphone and ipad but cannot delete original account as I can't remember password or recovery account email. HELP!

    I need to change my iCloud account on both my iPhone and iPad (used to be a joint account and not in use anymore) but I cant remember the password to delete the iCloud account on either device OR the rescue email to reset password!!!  While I can ask to reset the password I have no idea where the reset email is going!

    If your current account ID is an updated version of this older ID, try the steps in this article in order to delete the existing account: If you're asked for the password to your previous Apple ID when signing out of iCloud.  The last one (change your ID temporarily) will usually work.
    If your current account ID is an entirely new ID that was never previously associated with the old email address, contact the Apple account security team for assistance changing the password for the old ID: Apple ID: Contacting Apple for help with Apple ID account security.

  • I created a folder from my camera roll and shared with my icloud acct, can't figure out how to access it from my computer?

    I created a folder from my camera roll and shared with my icloud acct, can't figure out how to access it from my computer? I log onto icloud and can't find anywhere where "shared" photos are..

    You need Mountain Lion (10.8.2 or higher) and iPhoto '11 (9.4 or higher) or Aperture 3.4 to get shared photo streams on Mac.
    Another option to transfer them is to either import them to iPhoto using your usb cable, as explained here:http://support.apple.com/kb/HT4083, or to us an app like PhotoSync to transfer them to your Mac over your wifi.  (PhotoSync will also transfer albums, not just photos from the camera roll.)

  • Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?

    Air MD792E/A, iPAD WIFI CELL 32G Space Grey 
    Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?       Tried to sync with itunes but iTunes can't sync without a password.  I cannot see summary on the side bar.  How do I restore so I can restart my  iPAD Air since it has relatively no history. I have not had the chance to use it yet.  Finished set up to as far as the start menu.
    <Personal Information Edited by Host>

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How do I delete my iCloud can't remember password

    HHow do I delete my icloud because I can't remember password and won't let me reset it for some reason

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
    This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18

  • Login error when trying to access iCloud Mail

    I am receiving the following error when trying to access iCloud Mail. All other iCloud services are functioning.
    IS FATAL
    true
    APPLICATION NAME
    mail
    TITLE
    Mail could not be loaded
    MESSAGE
    There was a problem loading the application due to a possible network error or missing resources. Please try again.
    LOG
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: MAIL in main()
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: Creating local CK.User object
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: Creating local CK.AccountPreferences object
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: -->  Request 1:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Central"}
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: SC.Object:sc1473:dispatch('load content')
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: SC.Object:sc2647:dispatch('noContent')
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG:     -> entering "6.2.2 No Content"
    Tue, 10 Mar 2015 12:39:58 GMT:  WARN:  REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
      Status:0
      Request:/wm/preference
      Wmsid:null
      Redirect Count:1
      Timeout Redirect Count:1
      ResponseText:
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: -->  Request 2:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Central"}
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
    responseText: ,
    this._redirectCount: 1
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: <--  Response 2:  0  (72ms),  headers:   body: (empty)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: retrieveResponseError:
      ServerPreferencesDataSource.retrieveResponse
      error:-1/0
      guid:serverPrefsGuid
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: Bootstrap error: Preferences.RefreshError
    TYPE
    server
    APP STATECHART
    SC.Statechart:sc1030
      initialized: true
      name: cloudos-statechart
      current-states: [
        active.springboard.displayingSpringboard.springboard
      state-transition:
        active: false
        suspended: false
      handling-event: false
    BUILD NUMBER
    15B.169e9f7
    TIME
    Tue Mar 10 2015 07:40:01 GMT-0500 (CDT)        (1425991201489)
    HOST
    www.icloud.com
    USER AGENT
    Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    DSID
    103705688
    ENVIRONMENT
    PROD
    RECENT LOG MESSAGES
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: MAIL in main()
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: Creating local CK.User object
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: Creating local CK.AccountPreferences object
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: -->  Request 1:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Central"}
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: SC.Object:sc1473:dispatch('load content')
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: SC.Object:sc2647:dispatch('noContent')
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG:     -> entering "6.2.2 No Content"
    Tue, 10 Mar 2015 12:39:58 GMT:  WARN:  REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
      Status:0
      Request:/wm/preference
      Wmsid:null
      Redirect Count:1
      Timeout Redirect Count:1
      ResponseText:
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: -->  Request 2:   POST to https://p03-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=523F12B2-FC11-4D72-952C-A9AA1C424022&dsid=103705688,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1425991198034/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Central"}
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
    responseText: ,
    this._redirectCount: 1
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: <--  Response 2:  0  (72ms),  headers:   body: (empty)
    Tue, 10 Mar 2015 12:39:58 GMT:  DEBUG: <---------------- Request in: /wm/preference-list-->1425991198034/1,httpStatus: 0,round trip time: 71ms, wmsid: null
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: retrieveResponseError:
      ServerPreferencesDataSource.retrieveResponse
      error:-1/0
      guid:serverPrefsGuid
    Tue, 10 Mar 2015 12:39:58 GMT:  ERROR: Bootstrap error: Preferences.RefreshError

    After activatin iCloud, my dotMac account wouldn't retrieve mail anymore. It kept saying that my username or password were not good. No matter how many times I tried, I couldn't restore the service.
    Here's how I got it working again.
    Apparently my 6 letter password is no longer acceptable. You need to update it to an 8 letter password that includes numbers and capital letters.
    So I went to https://iforgot.apple.com and asked to reset my password.
    Because I could still get my emails logging into iCloud with Safari, I responded to Apple's email, and created a stronger password.
    Than I updated the passwords on my computer's Mail program, iPhone, and iPad (and of course everything else, iTunes, etc.).
    That was it!
    Everything works as normal again, I even was finally able to synchronize calendars over different computers again.
    Try it out, it could be your issue as well.

  • Apple asking me security questions that ive never set up and i can't purchase anything, and ive tried resetting them but i can't remember the password for my rescue email address, please help?

    Apple asking me security questions that ive never set up and i can't purchase anything, and ive tried resetting them but i can't remember the password for my rescue email address, please help?

    You need to either reset the rescue email address's password(check the site's help for instructions) or ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (99674)

  • HT4061 I locked myself out of my phone and am out of the country without access to a computer only an iPad to email and access iCloud  how can I get into my phone

    I locked myself out of my phone and am out of the country without access to a computer only an iPad to email and access iCloud  how can I get into my phone

    Hi Myreiac,
    Here's what the Apple Support site says you can do if you do not have access to a computer when your device has been disabled:
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    You can access Find My iPhone via the Find My iPhone app on your iPad.
    Good luck!
    Cheers,
    GB

  • How do I access ICloud on my 4S when it has an old email address for my apple ID?

    I've somehow lost my phone contacts and calendar information.  I'm trying to access ICloud hoping to retrieve the lost data.  But when I try to access ICloud it asks for a password that is associated with an old Apple ID email address. 

    Welcome to the Apple community Jalder.
    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • In settings restrictions is on but can't remember password to turn it off

    In settings, restrictions is on but can't remember password to turn it off

    Restore to last backup or factory settings

  • When starting up macbookpro a flashing folder appears with ? in middle i can't remember password

    can't remember password help

    A flashing question mark or globe appears when you start your Mac
    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • HT5312 What to do if we can t remember the answers to the secrets questions and we do not receive the reset when clicking send reset to rescue email ( can t remember what is the rescue email we gave ) ?

    What to do if we can t remember the answers to the secrets questions and we do not receive the reset when clicking send reset to rescue email ( can t remember what is the rescue email we gave ) ?

    The Three Best Alternatives for Security Questions and Rescue Mail
         1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • Have new 10.1 in. Slate,can't remember password.

    I  have a Slate 10.1 that I just started to use...again. I can not remember password. I turn it on, screen comes up, with Google circle and keyboard....and then I am lost.
    Thank you in advance
    This question was solved.
    View Solution.

    Here's a link to performing a Factory Reset on your device:
    http://support.hp.com/us-en/product/HP-10-Tablet/5447816/model/7531173/document/c04052020/
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Since I upgraded memory, I can't retrieve/send Mail.  Also can't remember password.  I'm a mess!  Help!!

    Since I upgraded memory, I can't retrieve/send Mail.  Also can't remember password.  Need HELP!!

    Upgrading to firefox 5 and updating my plug-ins helped a bit. Frog is less 'sticky' now, but it's not solved the problem. Java needs to be up to speed or the frog goes into stasis....

  • Several years ago I had an itunes account through my work email address. I have since left the company. When I tried to access the itunes I purchased, my password would not work because I no longer had access to that acct. How can I access that acct?

    Several years ago I had an itunes account through my work email address. I have since let the company but when I tried to access the songs I'd already purchased, my password would not work because that account no longer existed. I ended up having to open another account but how can I access that account to retrieve my other songs? I realize I can't transfer between accounts but maybe at least burn to CD?

    Hello, RSchultz13. 
    Thank you for visiting Apple Support Communities.
    You can reset your Apple ID password via the steps in the first article below.  I would try the option to answer your security questions.  If those steps do not work then you may need to reach out to our account security team to reset this old Apple ID password.  Once this is done you should be able to access your old DRM protected purchases.
    Apple ID: If you forget your password
    http://support.apple.com/kb/ht5787
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    Jason H.

Maybe you are looking for

  • Netweaver 2004s installation problem on Windows: Oracle 10G

    Hi Friends, I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it. The server has 6GB RAM and has 5GB of free space on C: and a free sapce  of 60GB

  • How to get the JSP Name calling the Tag Library inside the Tag Library

    Hi guys, I have defined a Tag Library PenStart: import javax.servlet.jsp.tagext.*; public class PenStart extends TagSupport   public int doStartTag()     return EVAL_BODY_INCLUDE;          public int doEndTag()     return EVAL_PAGE; }I have also defi

  • Attachment/LineText in PO(DI API)

    Hi experts, just wondering if I can attached files in PO or in other Document module in SAP using DI API. I've search that attachment using DI API is available only on Contacts, ContractTemplates, CustomerEquipmentCards, EmployeeInfo, KnowledgeBaseSo

  • Transactional Iview passing parameters for search help window

    Hi Experts, I have to create a transaction ivew through which i need to pass parameters to search help window (having two entries ). In has to select the particular entry and then go to next step. Can somebody give me guide me how to do it as i could

  • HTML header Page zero

    Hello all, We are trying to add a reference to a jquery image on page zero of our app. We are supposed to add this to the html header. We do not have an html header on page zero and we cannot figure out how to create or access it. Any help would be g