Trying to access remote switch via VLAN1 (which is shutdown)...

We were trying some things to get multiple VLANs to pass through some wireless bridges. In the confusion, we have misconfigured the port and locked ourselves out of the far switch, lol. The local switch has VLAN1 (default), VLAN2 (data), and VLAN3 (voice). None of the VLANs are shutdown and the switch has an interface for both VLAN2 and VLAN3. The remote switch also has VLAN1, VLAN2, and VLAN3 (and it has an interface for VLAN2 and VLAN3). However, VLAN1 is shutdown. The port used to connect it to the local switch has always been using VLAN2. In the midst of some changes, that port got changed to VLAN1 :( We can no longer access the remote switch at all. It does still show up in cdp neighbors on the local switch (although it says VLAN1 mismatch). Is there anyway we can get back into the remote switch without having someone go on site and perform a power cycle? Thanks.

Here is the email from Planet Networing:
About your inquiry:
I have two WNAP-6305 bridges connecting two Cisco switches. The Cisco switches are configured for trunking, but only one VLAN is being passed through the bridges. Every other bridge that I've worked with will allow all VLANs to pass through. Is there a way to allow that with these units?
Answer:
The WNAP-6305’s SDK didn’t support tagged VLAN, so only the default VLAN can be passed through the WDS bridge.
We’ll suggest you use WNAP-6350.

Similar Messages

Trying to access remote FreeNAS AFP share halts system!

Trying to access a remote FreeNAS box, with AFP sharing set up.
(AFP works fine over the LAN, just not over WAN.)
From a remote location, if I go to Finder and `Go>Connect to Server` then enter `afp://myserver.com`, I get prompted for username & password, and then am presented with list of shares, just as over LAN.
However, when I then select a share, there's a little spinner in the bottom of the window; it spins for a few seconds, and then my machine is OUT COLD. I.e., frozen, halted ... not black screen, but NOTHING works except moving the cursor around. Cannot Apple-Option-Escape, cannot Apple-Tab, cannot click anything. Only option is hard reboot.
I tried this from both a MacPro running 10.7.4, and MacBookPro running 10.6.8, and had the same result.
On the FreeNAS side, it's a FIOS connection, using a Verizon MI424WR-GEN2 modem, where I forwarded port 548 (TCP & UDP) to the FreeNAS server. (Obviously I'm getting through fine, since I'm being prompted to log in and getting the list of shares.)
I'm 96% sure this DID work before we switched to FIOS over there ... when we had DSL.
I checked Console but didn't see anything that seemed relevant.

Try this link: http://icomputernrd.blogspot.com/2011/07/freenas-fix-for-afp-connection-issues.h tml
Worked for me on Mac OS X Mount Lion (10.8)

Access Remote Webservice via Internet

Hi all,
Iam new to Web Services ...
Could any of u give me an Article or Code ... how could we access a basic webservice from Java ..... which is available remotly.
plz help me .. tks in advance...

abp_JavaPrg@mdu wrote:
I got the same error while I trying to connect the server in that port via ssh.I know ssh is "the new telnet", but I did not say telnet to be retro. ssh does encryption stuff, telnet does not. For checking that a port is open and (if the server sends at least the handshake in a human readable format) checking that the server you think is running is running telnet is a better option.
From the sounds of it the application you think is running is not running.

Creating an Intranet and using IIS 6 and recieiving a 403.14 error when trying to access remote servers share.

I can access the remote shares contents in my browser if I use file:////<server name>/share/filename.file but when I set up a link in the html code, I receive the 403.14 error in the log files. I also have directory listing set on the IIS 6 webpage
on our intranet server.
I am stuck and at a loss... I'm not terribly familiar with IIS...
Thanks in advance,
Eric

Hi,
Base on my experience, the UNC must use the
\\+PATH format, in some case if your code is not standard it will cause unknow error, more about the IIS question please post to the IIS forum.
More information:
IIS support forum
http://forums.iis.net/
Naming Files, Paths, and Namespaces
http://msdn.microsoft.com/en-us/library/windows/desktop/aa365247(v=vs.85).aspx
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error in trying to access my FORM via browser

Hi, I am new to Oracle Application Development, as a starter I created a sample form in Form builder and compiled it, let say TESTFORM.fmx
I have placed this file in [ C:\DevSuiteHome_1\forms ] as my default location in "default.env" file is this only.
Then I created a tag in "formsweb.cfg" as:
#ETA Report
[TESTFORM]
envfile=default.env
form=TESTFORM.fmx
userid=i-----r/i----r@xii
widith=1500
height=600
imagebase=codbase
archive_jini=frmall_jinit.jar,colorpicker.jar,keyfilter.jar,my_icons.jar
archive=frmall.jar
When I try to access it via my browser [IE6] by going to link: http://pptaw0054.lotte-ppta.com:8889/forms/frmservlet?config=TESTFORM
A grey box of 1500x600 is shown with an error shown in the center: java.lang.ClassNotFoundException: oracle.forms.engine.Main_
Can anyone please help me out with the problem.
Thankyou!

Hi Check these -
1. Check these URL's are working
http://pptaw0054.lotte-ppta.com:8889/forms/frmservlet
http://pptaw0054.lotte-ppta.com:8889/forms/lservlet
2.If Webutil installed? Then do proper configuration for "WebutilArchive"
WebutilArchive=frmwebutil.jar,jacob.jar
3.If Jinitiator is used,check if all corresponding jar files are downloaded onto user machine.Because all required class as shown in the error are there in jinitiator jar files.Also check all jar files that you have mentioned in archive_jinit are downloaded onto user machine.
DO like this if using webutil archive_jini=frmall_jinit.jar,colorpicker.jar,keyfilter.jar,my_icons.jar,frmwebutil.jar,jacob.jar
4.Enable all activex settings of your browser and do a proxy bypass setting in the browser as well..
5. Check if you have download rights for downloading JAR files mentioned in archive_jini
Edited by: anandk on Jul 24, 2012 1:18 PM

JClient accessing remote AppModule via EJB Session Fascade (BMT)?

Would appreciate some "how-to" advice on bootstrapping a remote JClient like the one in the VSM example,
such that: the JClient remotely accesses OC4J-pooled AppModule instances,
rather than creating a new AppModule instance on the client side.
In the OTN VSM-JClient example code, the Bootstrap is done in
AdministrativeServiceForm::main() as follows:
JUApplication app =
JUMetaObjectManager.createApplicationObject(
"VSMJClient.AdministrativeService",
null,
new JUEnvInfoProvider() );
String appModule =
System.getProperty("jclient.service",
"VSMJClient.AdministrativeService" );
The problem with this is -
JUMetaObjectManager.createApplicationObject() is undocumented, hence may or may not facilitate remote
App-Module access?
If anyone can share a working example of JClient remote AppModule access over ORMI (talking to modules deployed on JBuilder-embedded-OC4J), or can modify the VSM-JClient to do the same - it would be greatly appreciated!
Many thanks,
Lee.

JUMetaObjectManager.createApplicationObject("VSMJClient.AdministrativeService",null,new JUEnvInfoProvider());
looks for the Session AdministrativeService in VSMJClient.cpx:
<Session
Name="AdministrativeService"
Package="oracle.otnsamples.vsm.services"
Configuration="AdministrativeServiceLocal" >
</Session>
<Session
Name="RemoteAdministrativeService"
Package="oracle.otnsamples.vsm.services"
Configuration="AdministrativeService9iAS" >
</Session>
Just call
JUMetaObjectManager.createApplicationObject("VSMJClient.RemoteAdministrativeService",null,new JUEnvInfoProvider() );
to access the deployed Beans with configuration AdministrativeService9iAS.

Problem trying to access Detail VO via View Link - Req/Distributions

Hi,
I'm attempting to access a detail VO using a View Link accessor. I'm not sure if I'm approaching this the right way, but here is what I am doing:
oaAcctVORowImpl = (PoRequisitionLinesVORowImpl)aaAcctVO.getRowAtRangeIndex(q);
RowIterator distRS = oaAcctVORowImpl.getPoReqDistributionsVO();
No rows are returned although I am expecting rows.
The getPoReqDistributionsVO is the accessor method of the Destination on the View Link (i.e. the detail VO).
under oracle\apps\icx\por\req\server
Any ideas would be greatly appreciated!
Thanks,
Teri

The VO's and VL's are part of the OA framework - i.e. they were pre-generated.
Here's the VL xml contents:
<?xml version="1.0" encoding='windows-1252'?>
<!DOCTYPE ViewLink SYSTEM "jbo_03_01.dtd">

<ViewLink
Name="ReqLineToDistributionsVL"
EntityAssociation="oracle.apps.icx.por.schema.server.ReqLineToDistributionsAO" >
<DesignTime>
<Attr Name="_isCodegen" Value="true" />
<Attr Name="_version" Value="9.0.3.11.3" />
</DesignTime>
<ViewLinkDefEnd
Name="PoRequisitionLinesVO"
Cardinality="1"
Owner="oracle.apps.icx.por.req.server.PoRequisitionLinesVO"
Source="true" >
<AttrArray Name="Attributes">
<Item Value="oracle.apps.icx.por.req.server.PoRequisitionLinesVO.RequisitionLineId" />
</AttrArray>
<DesignTime>
<Attr Name="_minCardinality" Value="1" />
<Attr Name="_isUpdateable" Value="true" />
<Attr Name="_finderName" Value="PoRequisitionLinesVO" />
<Attr Name="_accessor" Value="false" />
</DesignTime>
</ViewLinkDefEnd>
<ViewLinkDefEnd
Name="PoReqDistributionsVO"
Cardinality="-1"
Owner="oracle.apps.icx.por.req.server.PoReqDistributionsVO" >
<AttrArray Name="Attributes">
<Item Value="oracle.apps.icx.por.req.server.PoReqDistributionsVO.RequisitionLineId" />
</AttrArray>
<DesignTime>
<Attr Name="_isUpdateable" Value="true" />
<Attr Name="_finderName" Value="PoReqDistributionsVO" />
<Attr Name="_accessor" Value="true" />
</DesignTime>
</ViewLinkDefEnd>
</ViewLink>

TS1559 I have tried to access wifi from my 4s which has the greyed out wifi button as outlined but still no good. What else can I do

I have a greyed out wifi button for wifi. I have tried to reset the network connections as suggested but this has failed. Any ideas?

Make an appointment at any Apple store.

Can't access remote speakers through airtunes

I used to be able to access remote speakers via iTunes through my airport express. Now there isn't even a button offering the choice. I have set I tunes to look for remote speakers.
If I connect directly to the PowerMac all is good.
Did a firmware update to the Airport and am running iTunes 6.0.2
Any ideas?

i installed AE Firmware 6.3. that did not really help, but didn't cause further problems as well..
i tried deleting preferences files, dit not really help either
i then downloaded the 10.4.4 Combo installer from Apples Website and after that I had my buttons for the remote speakers again.
i had the SAME problem after EVERY upgrade of iTunes in the past!!! VERY annoying

Iam trying to acces Remote corba Server

im trying to access Remote corba Server from beans in WLS.
the client program is corba client. When i ever that JSP page Excuted ,
it is not able to find Remote Corba Server...what should i add to access
that Corba Server.
what classpath should i add in WLS.
is there any examplein which corba client from bean call Remote Corba
Server
thanks
khaleel.

1)i start WLS by runnig "startWeblogic" in this file i set java_home =.\jre1_2\jre ..if i run using this
***orb class = class com.inprise.vbroker.orb.ORB id diplayed
Error in binding Corba objects
org.omg.CORBA.OBJECT_NOT_EXIST:
Could not locate the following POA:
poa name : /rx_agent_poa
minor code: 0 completed: No
Mon Oct 09 18:06:41 CDT 2000:<E> <ServletContext-General> Servlet failed with Exception
2) but if i run the WEBLogic by seting java_home="jdk1.3"
i get this out put
***** orb class = class com.sun.corba.se.internal.iiop.ORB
java.lang.NoClassDefFoundError: com/inprise/vbroker/CORBA/portable/ObjectImpl
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
at java.lang.ClassLoader.defineClass(ClassLoader.java:426)
at weblogic.boot.ServerClassLoader.findLocalClass(ServerClassLoader.java
:334)
at weblogic.boot.ServerClassLoader.loadClass(ServerClassLoader.java:102)
at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
at PreQual.PreQualManager.qualifyService(PreQualManager.java:66)
at PreQual.Main.main(Main.java:40)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:148)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
:62)
Tue Oct 10 00:23:01 CDT 2000:<E> <WebLogicServer> Failed to invoke startup class
qualify=PreQual.Main
java.lang.NoClassDefFoundError: RX/_preQualifyStub
at PreQual.PreQualManager.qualifyService(PreQualManager.java:66)
at PreQual.Main.main(Main.java:40)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:148)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
khaleel wrote:
when i run the sample program as startup it prints
*** orb class = class com.inprise.vbroker.orb.ORB
Eduardo Ceballos wrote:
When you run the sample program as a startup, what does the following print?
//Initialize the orb
org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init(args,null);
System.out.println("\n\n***** orb class = "+orb.getClass());
Also, why is the 1.2 jre involved? You wrote that you've added an orb.properties file, in
" i added orb.properties file in weblogic\jre1_2\jre\lib "
I think that, for what you are trying to do, it might work better that you run in 1.2.
In 1.3, you may also need to reset the property value for javax.rmi.CORBA.UtilClass and javax.rmi.CORBA.PortableRemoteObjectClass. If these are weblogic classes, set them to com.sun.corba.se.internal.javax.rmi.CORBA.Util and com.sun.corba.se.internal.javax.rmi.PortableRemoteObject, respectively. In
1.3, we set them to to classes that only work to support our implementation of rmi-iiop.
khaleel wrote:
hi
thanks for your help in advance...
1)ya, i had set jspcomplier classpath and Servlet's loader's class path.
i using WLS5.1 and jdk1.3... visibroker4.1....
these are jsp.properties in properties page...
weblogic.httpd.register.*.jsp=\
weblogic.servlet.JSPServlet
weblogic.httpd.initArgs.*.jsp=\
pageCheckSeconds=1,\
compileCommand=D:/jdk1.3/bin/javac.exe,\
workingDir=E:/weblogic/myserver/classfiles,\
verbose=true
(2) i wrote standalone test program to comminicate with Corba Server, and
executed it outside WLS and it runs succesfully... here is the code from
that stand alone program which comunicates the server
//Initialize the orb
org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init(args,null);
// Get the preQualify Id
byte[] preQualifyId = "Qualify".getBytes();
RX.preQualify qualify = RX.preQualifyHelper.bind(orb, "/rx_agent_poa",
preQualifyId);
(3) when i tried this in startup class it gives this error
Error in binding Corba objects
org.omg.CORBA.OBJECT_NOT_EXIST:
Could not locate the following POA:
poa name : /rx_agent_poa
minor code: 0 completed: No Mon Oct 09 23:26:51 CDT 2000:<E>
<WebLogicServer>
Failed to invoke startup class qualify=PreQual.Main
(4) and when i tries this in servlet it again gives same error as in (3)
more Info ---
i added orb.properties file in weblogic\jre1_2\jre\lib
thanks in advance
your help will be appriciated..
thanks
khaleel

MSS error while trying to access Adobe forms

Hi all
We are using EP 7 sp14. Delpoyed ESS/MSS BP SP 14. while trying to access certain functionalities in MSS which make use if standerd Adobe interactive forme through portal its coming up with the following error.
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
I had done few settings in Visual Admin in
1. server >services>web services security>web services clients>sap.com>tcwdpdfobject>com.sap.tc.webdynpro.adsproxy.Adsproxy*configPort_Document.
2. In default URL gave : http://portalserver:port/AdobeDocumentServices/Config
3. Authentication:Basic Authentication : gave username:ADSUSERpwd which is set in the backend.
4. In Deploy stopped and started the application.
Also in Destinations -> Created a new HTTP and set the URL pointing to the backend.
Is there any additional configuration to be set on the Portal side.
Regards,
Sasha.

Got corrected with changing data-type for a property in the definition file.

I keep trying to access my mail but MAIL keeps rejecting my password. I am an AOL user. Please advise?

I keep trying to access my mail via the MAIL icon on my MacbookPro but it keeps rejecting my password. It worked find an hour ago but all of a sudden it won't work. I tried deleting the acct and re-adding it but still the same problem. The odd thing is I can send no problem.
I am an AOL user and am entering it correctly but it keeps rejecting I can access my acct via aol no problem
Okay now it's effecting my Iphone and Ipad accts.
Please advise?

So far as I can tell this is a server overload problem and Apple is working to fix things. I have had the same thing all morning and just now it cleared up, though not with AOL, but my iCloud mail. I was, of course, typing in the correct password, so the error message one keeps getting is very misleading, as the rejection has nothing to do with the PW. I think if we are all patient things will straighten out through the day. My mail is okay as of noon, crossing my fingers, but at least it is nothing I did wrong.

An error occurred when trying to access the service

I'm asking myself why I purchased a one year subscription to Adobe Reader to convert PDF files to Doc files, when it NEVER WORKS and no one seems to be able to help me!!! I am on a Mac Book Pro with Yosemite (don't upgrade it slows your Mac badly) and whenever I try to convert a pdf to a doc I get 'an error occurred when trying to access the service', can anybody help me please?

Hi Cedric,
The customer service number is 800833687
The direct link for chat support is: http://adobe.ly/19llvMN
You need to click on 'Still need help' to initiate the chat session.
Are you getting this error: "an error occurred when trying to access the service" while trying to access the service via Reader.
Try using the link: https://cloud.acrobat.com/exportpdf sign in with your Adobe ID and try to convert a pdf to doc and check if that works for you.
Reards,
Rave

An IOException was thrown trying to access the WSDL at the given URL.

Hello
I deployed webservices on weblogic 8.1.5. I defined Security policy on webservices. The server is allowed to access from both inside and outside our domain. When I access with internal ip address, trying to test methods from Launch Test Page from Admin console. When I test a method, it prompts for user name and password. I enter username and password, the invocation is successful.
After I access Launch Test Page with external ipaddress (from outside the domain), trying to test method, the server did not ask me username and password, I get following exception. The only port open to external world is 80. The apache is configured with wlplugin and divert all trafic to port 7001.
I was wondering if any one has seen this and how did you fix. Please advise. I appriciate your help.
Thank you,
Balaji
<Apr 18, 2006 5:50:12 AM CDT> <Info> <WebService> <BEA-220094> <An IOException was thrown trying to access the WSDL at the given URL.>
<Apr 18, 2006 5:50:12 AM CDT> <Info> <WebService> <BEA-220034> <A stack trace associated with message 220094 follows:
java.io.FileNotFoundException: Response: '403: Forbidden' for url: 'http://XXX.XXX.XX.XX:80/eventws/EventManagementService?WSDL'
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:425)
at weblogic.net.http.SOAPHttpURLConnection.getInputStream(SOAPHttpURLConnection.java:28)
at weblogic.webservice.tools.wsdlp.DefinitionFactory.createDefinition(DefinitionFactory.java:126)
at weblogic.webservice.tools.wsdlp.WSDLParser.<init>(WSDLParser.java:76)
at weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:108)
at weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:84)
at weblogic.webservice.server.servlet.ServletBase.invokeOperation(ServletBase.java:295)
at weblogic.webservice.server.servlet.WebServiceServlet.invokeOperation(WebServiceServlet.java:343)
at weblogic.webservice.server.servlet.ServletBase.handleGet(ServletBase.java:266)
at weblogic.webservice.server.servlet.ServletBase.doGet(ServletBase.java:158)
at weblogic.webservice.server.servlet.WebServiceServlet.doGet(WebServiceServlet.java:254)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6981)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
>
<Apr 18, 2006 5:51:32 AM CDT> <Info> <WebService> <BEA-220094> <An IOException was thrown trying to access the WSDL at the given URL.>
<Apr 18, 2006 5:51:32 AM CDT> <Info> <WebService> <BEA-220034> <A stack trace associated with message 220094 follows:
java.io.FileNotFoundException: Response: '403: Forbidden' for url: 'http://XXX.XXX.XX.XX:80/eventws/EventManagementService?WSDL'
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:425)
at weblogic.net.http.SOAPHttpURLConnection.getInputStream(SOAPHttpURLConnection.java:28)
at weblogic.webservice.tools.wsdlp.DefinitionFactory.createDefinition(DefinitionFactory.java:126)
at weblogic.webservice.tools.wsdlp.WSDLParser.<init>(WSDLParser.java:76)
at weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:108)
at weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:84)
at weblogic.webservice.server.servlet.ServletBase.invokeOperation(ServletBase.java:295)
at weblogic.webservice.server.servlet.WebServiceServlet.invokeOperation(WebServiceServlet.java:343)
at weblogic.webservice.server.servlet.ServletBase.handleGet(ServletBase.java:266)
at weblogic.webservice.server.servlet.ServletBase.doGet(ServletBase.java:158)
at weblogic.webservice.server.servlet.WebServiceServlet.doGet(WebServiceServlet.java:254)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6981)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
>
<Apr 18, 2006 5:54:57 AM CDT> <Info> <WebService> <BEA-220094> <An IOException was thrown trying to access the WSDL at the given URL.>
<Apr 18, 2006 5:54:57 AM CDT> <Info> <WebService> <BEA-220034> <A stack trace associated with message 220094 follows:
java.io.FileNotFoundException: Response: '403: Forbidden' for url: 'http://XXX.XXX.XX.XX:80/eventws/EventManagementService?WSDL'
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:425)
at weblogic.net.http.SOAPHttpURLConnection.getInputStream(SOAPHttpURLConnection.java:28)
at weblogic.webservice.tools.wsdlp.DefinitionFactory.createDefinition(DefinitionFactory.java:126)
at weblogic.webservice.tools.wsdlp.WSDLParser.<init>(WSDLParser.java:76)
at weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:108)
at weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:84)
at weblogic.webservice.server.servlet.ServletBase.invokeOperation(ServletBase.java:295)
at weblogic.webservice.server.servlet.WebServiceServlet.invokeOperation(WebServiceServlet.java:343)
at weblogic.webservice.server.servlet.ServletBase.handleGet(ServletBase.java:266)
at weblogic.webservice.server.servlet.ServletBase.doGet(ServletBase.java:158)
at weblogic.webservice.server.servlet.WebServiceServlet.doGet(WebServiceServlet.java:254)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6981)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)<pre></pre><pre></pre>urlurl

Hi Francois,
The JAR file generated by the <clientgen> Ant task, has a static WSDL inside it.
To get your JAX-RPC client to use it, write code that looks like this:
MyService_Impl service = null;
MyServicePort port = null;
try
// There are two constructors for every XXX_Impl class.
// The one that accepts a wsdlURL (as a String) will
// request the WSDL from the service provider. The
// no-arg one will just use the statis WSDL in the
// client.jar generated by the <clientgen> Ant task.
service = new MyService_Impl();
port = service.getMyServicePort();
MyObject response = port.myServiceOperation();
Again, this will cause the WLS client-side JAX-RPC classes, in the webserviceclient.jar,
to use the static WSDL (in the client.jar generated by the <clientgen> Ant task)
to invoke the target web service. It will not send a request to the target web
service to retrieve it's WSDL, because it already has it.
Regards,
Mike Wooten
Francois Staes <[email protected]> wrote:
>
Hello,
I'm trying to access some simple web services which are implemented using
some Perl module (don't ask ....).
After I've gotten their WSDL file, I can successfully generate stubs
using
the clientgen ant task.
However, when I try to access the webservice from within my EJB's, I
get the
following error message:
An IOException was thrown trying to access the WSDL at the given URL.
java.io.FileNotFoundException: Response: '411: Length Required' for url:
'http://petest01:8082/cgi-bin/WebStore.cgi'
It seems as if the perl SOAP implementation doesn't allow me to check
their
WSDL file. Just sending the SOAP POST messages works fine.
I explicitly specified the 'saveWSDL' option to the clientgen task, but
it
still tries to access the WSDL file at runtime. Any way to resolv this
issue?
Regards,
Francois Staes.

I purchased the Adobe PDF Pack but it won't allow me to convert any files to pdf or combine multiple files to into 1 pdf form. It keeps saying "Error occurred while trying to access the file". WHY

I purchased the Adobe PDF Pack for $7.50/month (or $89.99/yr) but it won't allow me to convert any files to pdf or combine multiple files into 1 pdf form. It keeps saying "An error occurred while trying to access the service". WHY is this happening & How can I fix it?

Hi hpmg,
It seems you are trying to access the service via Adobe Reader. Make sure you are signed in with your Adobe ID. Is Reader updated to the latest patch v 11.0.09?
It might be possible that a firewall or antivirus might be breaking the connectivity from Reader to the server.
Try accessing the service from the browser: https://cloud.acrobat.com/exportpdf and check if that works for you.
Regards,
Rave

Trying to access remote switch via VLAN1 (which is shutdown)...

Similar Messages

Maybe you are looking for