Trying to activate old sim card need help

i bought another phone today and had an old sim card at home from a 4g phone activated it in the new phone but it wont let me make calls

Try removing and resetting the Sim card again, if the card is good and for an active Verizon account it should work. If the card does not work visit a Verizon Corp Store and get a new card, there is no charge for the card at a VZW Corp store.

Similar Messages

  • IPhone 4 with Att, 3g, I can receive calls but caller can't hear me. I tried reboot and remove sim card. Help!

    IPhone 4 with Att, 3g, I can receive calls but caller can't hear me. I tried reboot and remove sim card. Help!

    Restart the device. http://support.apple.com/kb/ht1430
    Reset the device. (Same article as above.)
    Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • IPhone 3S was used with Bell, then unlocked to use with Rogers. Now I want to use it as iPod (Don't want to activate as phone),but when connecting to iTunes I'm getting message:  There is no SIM card, disconnect and insert new SIM card. Help?

    I have an old iPhone 3S, that was used with Bell. My friend lost her phone and I lend her this one, which she unlock to use with Rogers. I got it back and want to use as an iPod not the phone, but when I connected to iTunes I am getting this message: "There is no SIM card installed in the iPhone you are attempting to activate. Please diconnect and insert a SIM card".
    I went to Bell and Rogers where we tried inserting active cards but message never changed.
    On the phone itself I am able to get wifi but finish with "Your phone could not be activated because the activation server is temporary anavailable."
    I run diagnostic from iTunes:everything is working properly, only message out of normal is "iTunes is not running in safe mode"
    How can I sinc this phone with iTunes, so I can use it to lisen to music?
    Any help will be apriacieted

    I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
    Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
    Yes, my friend unlock the phone to use with Rogers but I don't know where

  • HT201209 i'm trying to activate my gift card from last christmas but it keeps telling me to "try back later". Please help I hate to see $25.00 go down the drain.

    i'm trying to activate my gift card from last christmas but it keeps telling me to "try back later". Please help I hate to see $25.00 go down the drain.

    Click here and request assistance.
    (91679)

  • If you restore your iphone 3g would you need to activate you sim card? how to do you acticvtae your sim card?

    if you restore your iphone 3g would you need to activate you sim card? how to do you acticvtae your sim card?

    Restoring the iPhone requires reactivation, which in turn requires a SIM card.

  • Does the sim card need to be in the phone to restore the itunes from my old iphone

    I am trying to restore all my stuff from my iphone 3 to my iphone 4, does the sim card need to be in the iphone 4 to do this?

    iPhone: Transferring information from your current iPhone to a new iPhone

  • Searching for Network / SIM card blocked - help please!!

    I have just purchased an 8700c from a reputable eBay seller from whom I have previously purchased other items.
    The 8700c was advertised as Unlocked without a SIM card.
    I have never owned a Blackberry before and am just getting familiar with it.
    When I click icon to 'Turn Wireless On' and press the Phone key then at top of screen displays "Searching for Network".
    After a minute or so displays "No Service".
    I bought the 8700c because one day my previous mobile phone did exactly the same thing.
    After an hour on my landline phone with the phone company they assured me the GSM network was functional in my area and suggested my old phone was faulty.
    Not knowing if the phone itself had just died or if fault was with the SIM card I took it to the local branch of the telco.
    One of the guys there swapped his SIM card into my phone and had same problem - hence phone faulty.
    Thinking about it later I realised that it didn't prove there wasn't also a problem with my SIM card but I thought it unlikely so decided to buy a new phone.
    Anyway, received the 8700c yesterday and have inserted my old SIM card, been reading manual, etc.
    Whilst learning how to use it I've been asked several times to enter a password.
    Assuming this was the PIN/password I had on my old phone to prevent use in case I lost the phone, I entered it and it was accepted without any error/warning.
    So I thought I was right in believing the PIN/password was stored on the SIM and not another code, maybe in some EPROM memory in the old phone - I'm not so sure now.
    Doing a Google search I've found mention of various PIN/PIN2/PUK/PUK2 codes used in mobile phones which, if not used correctly, can cause the phone to be locked permanently.
    Here's current information I've found on the 8700c:
    click icon Settings / Options / Status shows
          PIN:      {8 alphanumeric code}
          IMEI:     { 6 digits .00. 6 digits .5}      i.e 15 digits and 3 periods
    click icon Settings / Options / Advanced Options / SIM Card shows
          SIM Card: Blocked
          ID:     {20 digit number}
    click icon Phone shows
          My Number: Unknown
    click again to see list of items, scroll down to Options
    click again to see list of items headed Phone Options
    click on General Options
    the 'Show "My Number":' line has value Yes
    click icon Settings / Options / Network shows
          Network: * None *
          Network Selection Mode: Automatic
    click again to see list of items, scroll to My Preferred Network List
    click again to see one item which is GSM network associated with my old phone
    So it seems this has been found from the SIM card.
    The top left hand side of screen shows 'cingular' but I think I read somewhere that this was just the network for which the 8700c was originally issued and doesn't detemine whether the 8700c is currently locked/unlocked.
    Is 'My Number' Unknown because the SIM card is Blocked?
    Is the SIM card Blocked because I entered my old PIN password instead of the Settings / Options / Status alphanumeric code PIN or some other PIN?
    How can I determine if the 8700c is really unlocked?
    Are there some other settings/options or anything else I should do so I can get connected to the network?
    Any thoughts would be very welcome.

    I am having exactly the same problem mate. Never used a Blackberry - received mine today from eBay (Didn't include a manual) and i have been trying to configure it with no luck. I can't connect to a Network/My SIM Card is blocked/My number is unknown - Even though my SIM works perfectly in my Sony Ericsson. Have no idea what to do. Any help would be appreciated.

  • I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

    I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

    Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • HT4623 I updated my iphone to the newest update but now it doesn't want to read my SIM card. Help!

    I updated my iphone to the newest update but now it doesn't want to activate. It says the sim card I have it's not valid and that I need to insert the som card that came with my phone. Problem is my phone was given to me by a friend of mom's and he just gave me the phone I had to buy a new sim card. It has been working all right until now. Should I go buy a new sim card? Help!

    Your phone is locked to a carrier.  Only a SIM from that carrier can be used to activate the phone.  Ask the "friend of your mom's" to which carrier the phone is locked.  You'll then need to contact that carrier and see if you are eligible to have the phone unlocked.  If not, the phone is useless to you.

  • HT1766 hi, i am trying to take a sim card from one phone and insert into an iphone 3. tha screen shows a lock and an itunes icon + emergency call only/ I called att and they said i nee to log on

    i am trying to change a sim card to this phone but an error comes up with an itunes icon an plug and the pad lock

    You need to perform a restore on a computer with iTunes installed

  • HT1349 Where do I go on the iPad to activate the sim card?

    Where do I go on the iPad to activate the sim card?

    The SIM card should already be activated.  To turn-on cellular data, go to Settings-->Cellular Data and turn it on.  Once its on you can sign up for a monthly data plan on the same screen.
    If you are getting a SIM error about it not being active, or it just won't turn on,  you'll need to call your carrier (ATT or Verizon).

  • Ok so I have a free standing iSight Cam, is it possible to use it with my white MacBook ? and if so how do I go about it ? I've tried researching for updates, drives but need help.

    Ok so I have a free standing iSight Cam, is it possible to use it with my white MacBook ? and if so how do I go about it ? I've tried researching for updates, drives but need help. Can someone give me some direction ?

    jpatricio787 wrote: ... is it possible to use it with my white MacBook ?...
    OK so yes, but if, and only if:
    (1) your MacBook has a Firewire port (not all do)
        - and -
    (2) your old external iSight camera works (not all do)
        - and -
    (3) your MacBook is working properly.
    If you are not certain whether your MacBook model has Firewire, you can search MacBook Technical Specifications for your model.  Alternatively, check the  User Guide Manual that came with your MacBook for the information you need to be certain.
    If you are not certain that your old external iSight camera works, you can test it using the suggestions in this link.
    jpatricio787 wrote: ... if so how do I go about it ? ...
    Follow the instructions in your iSight User's Guide to connect and turn on the iSight.  Then launch the Apple app you want to use with your iSight.  If you need more information about using an app, search for "camera" (without the quote marks) in the Help menu choice for the app.
    jpatricio787 wrote:... Can someone give me some direction ?
    If you need more direction, post back the specifics of what you still need.  We will offer further direction based on the details of your reply.
    Message was edited by: EZ Jim
    Mac OSX 10.9.3

  • I've reset my iPhone 3GS and I'm having trouble activating it with an old SIM card

    I've reset my iPhone 3GS and I'm having trouble activating it with an old SIM card
    I just would like to activate it so I may use it as an iPod I have the iPhone 4s now... HELP

    What trouble are you having?
    If there is an error message, what is the exact wording of that message?

  • Can I use my old SIM card from iPhone 3gs to iPhone 6 ?

    I have a iPhone 3gs for over 3 years . I Was wondering if I could reuse my SIM card from 3gs to the iPhone 6 ? Since the iPhone 6 cost $199 I wanted to know if it's possible to use an old SIM card and put it in the new phone

    No.
    The SIM cards are different sizes.
    Just get a new one from your carrier, if the iphone does not already have one.

  • My ipod touch (2nd generation) is stuck on the usb to itunes screen.  I have NOT jailbroken it, and i have alsop tried restarting numerous times. I need help, soon!

    My ipod touch (2nd generation) is stuck on the usb to itunes screen.  I have NOT jailbroken it, and i have also tried restarting numerous times. I need help, soon! Itunes on my computer works about 50% of the time, so i feel lost!

    Download RecBoot and see if you can kick it out of recovery mode.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

Maybe you are looking for

  • Froze upgrading ios 6 on connect to itunes screen not recognized by itunes and wont charge no power with usb

    The guy at the Apple store said "Now thats a Brick" "I've never seen or heard of one this bad!" I bought the phone with little to no info on it. I was told that it froze after several failed attempts at loading IOS 6. Now... It will only turn on if p

  • Relationship about ATP check and credit check

    Dear all,           At present,  we have credit control in sales  order. The rule is : once the sales order's amount over 1 dollar, the order will be blocked for credit check. This order has to release credit block manually in VKM4.           Here ha

  • Why can't I select a video from my iPhoto library to send via email?

      I send a lot of photos and used to send videos but now I can't select a video like I do a photo in the library.    I have a newer hard drive and use OSX version 10.5.8 wihich I believe is Leopard.  I've updated all that is available.  Any suggestio

  • Quotations conversions into PR

    Gurus, My client wishes to use the RFQ flow for PM generated PR's. We create RFQ through ME41 tcode in reference to a PR. The quotations for each RFQ are then maintained and we get to the price analysis report ME49. Once the rejection indicator is se

  • Paragraph format

    hi all, i am working on a sap script.i am facing a strange pblm whenever i  make changes to the text in the page windows by doing different paragraph formats <HT> TEXT </>.AFTER ACTIVATING.if i go back to the text editor i am loosing the changes and