Trying to add a canon mx715 printer to laptop no success due to updates not available?, trying to add a canon mx715 printer to laptop no success due to updates not available?

Hi can anyone help me with an update for a canon MX715 multi printer - canon and apple cant supply update so the laptop cant locate?
Thanks
Dave

Try here:
http://driverscollection.com/?H=PIXMA%20MX715&By=Canon&SS=Mac%20OS%20X
Click on all the buttons. Mac...free check for...anything that may connect to Mac.
Maybe it is no longer supported, you may want to contact Canon for options.
Maybe there may be some help here.
http://www.justanswer.com/sip/canon/camera%20and%20video?r=ppc%7Cga%7C1%7CHI%20- %20Electronics%20-%20CYN%7CCanon%20Camera%20-%20Normal&JPKW=canon%20pixma&JPDC=C &JPST=driverscollection.com&JPAD=21307652763&JPMT=&JPNW=d&JPAF=txt&JPCD=20120207 &JPRC=1&JPOP=Darren_Andrew9sec_Trans&gclid=CIiM_--z1rsCFRBnOgodLlAAwQ
Hope there is some help here

Similar Messages

Hello, I currently have a MacBook snow leapord and i'm trying to connect it with my Canon MP560 printer, i put in the CD and installed everything properly but now when i add a printer it says a Queue already exists, i click continue and nothing happens???

Hello,
I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
had happend. PLEASE HELP
sincerely,
Laura.

I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
But, before doing this, download the last good driver, CDs usually contain outdated drivers.

Canon iP4200 - an error occured while trying to add the printer Error -9672

It seems I am one of the hoard of folks unable to add my printer (in my case, a canon iP4200) to the Airport Extreme network.
I have repaired permissions
I have reinstalled the lastest driver
I have read through the discussions
The airport was sold in part because "You'll be able to print to your USB printer with it."
Is there an Airport expert out there who can fix this?

What firmware does your base station have?
What version of the Canon driver are you using?
iFelix

Trying to add Canon MP500 printer via Bonjour; get Error -9672

I have my Airport Express hooked up to my Canon MP500 printer. My computer recognizes the Airport Express. I go to Print & Fax in System Preferences and try and add the printer via Bonjour - it stalls and then displays Error -9672. I have had this printer hooked up successfully before. Any suggestions? Thanks.

From HP Support
Reset the device when it is not functioning properly.
If the device is not functioning properly or to clear memory, reset it.
On the operator panel, press and hold the <ON/OFF> button for one second. (The display will go blank.)
Wait approximately ten seconds and then press the <ON/OFF> button again.
Wait until the device has completed its cycling process before submitting another job request.
A number of site online mention problems with different brand printers on intel macs. Some have correcedt the problem by downloading an older driver that that which came with the computer.

Cannot add a Canon Network printer to iMac (Intel) OS 10.8.3

I have never been able to connect this mac to the networked printer(Canon ImageRunner Advanced C5045). The printer is detected as a printer nearby connecting through bonjour, but it won't print with the updated drivers, it wont print with generic drivers. I've added it by IP address, by advanced settings with IP address, When I use the canon drivers, it gives me a driver error -50. When I use the generic drivers it says its connecting and says it sent the prints, but nothing comes out of the printer. I'm kind of at a loss. Any suggestions? Please?

been sitting here non stop for two days trying to make it work.
Under Adding it by default:
Ive used the canon driver UFR II (both US and UK) 2.43 which is supposed to work with 10.8. This leads to an error "Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again, then start Printer Utility to get the printer information." Ive used the generic PostScript printer driver and the generic PCL printer driver. These say they have printed - but nothing comes out of the printer.
Under adding it by IP
Ive used IPP with canon drivers/generic drivers (canon drivers error -50 - generic drivers say they have printed but nothing comes out) Ive used Jet Direct with canon/generic drivers (no results) Ive used LPD with canon/generic drivers (no results)
Under adding it by windows
I've found what I believe to be the printer, but it asks me to log into the printer with a user name and password - I dont have either and didnt need any such thing to set it up on the windows machine right next to it.
Under adding it by advanced
under canon CUPS BDL - got error -50
under canon CUPS Uni-direct IP - got error -50
under canon CUPS Uni-direct USB - got error 50 and Printer is not responding.Check the printer power and connection, and then try sending printing job again.
under canon UFR - got error 50
under IPP - got couldnt connect would you like to continue - yes - says printed - no results
under IPP (http) got error -50
under IPP (https) - got error 50
under IPP (ipps) got error 50
under Jet direct - got no results
under LPD/LPR - got no results
under windows with spoolss - got log into printer with user name and password - followed by error -50

Unable to add Lion compatible printer Canon iP4500

Hello.
Having problem to re-install my Canon iP4500 printer. It was running well for years, but I had some issues (USB cable disconnected was the problem ) and deleted the printer to re-install it, all in System Preferences.
The problem is that when trying to add it as a new printer, the system states that "Apple has new software for your printer, do you want to download & install it". Well, yes of course. It then tries to download the driver, but always fails, stating the server is not available, please contact your hardware vendor for the latest driver / software". (Internet is working fine, allowing to post this, for example)
So, done that, downloaded and installed the latest canon driver for the iP4500, "Successfully". The printer still does not show up as an available printer, though it is still selectable to install, then starting the procedure again (Apple has software....no it is not available, contact Canon...).
How can I install the printer???
Thanks...

So, downloaded the latest Apple software for Canon printers, which installed successfully, but the printer is not available. Trying to add it yet again in System Preferences, Print & Scan, only gives the download & install option, then the error message "The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
How can I tell the Add Printer in Lion that I already have the software, both from Apple and Canon...???
Thanks....

We are trying to connect a new WPS printer to our network. We go into Airport utilities and then hit the Base Station drop down to access Add WPS printer. However, when you hover over the Base Station menu, nothing is highlighted. Suggestions?

We have tried to add a WPS Canon Pixma-Pro to our Airport Extreme network. However when we are in Utilities and try to access the Base Station drop down menu nothing is highlighted. Therefore we can not click on the Add WPS Printer title. I'm sure it is some user error that we are overlooking, but extremely frustrated. Any help will be greatly appreciated.

Open AirPort Utility
Click on the AirPort Extreme icon
Click Edit in the smaller window that appears
Now try the Base Station menu again

Canon MP210 just will not show up in Add Printer

Trying to help a friend get new (to her) printer added in OS 10.5.8... There isn't even a network involved, just trying to add it as simple USB.
It's a Canon Pixma MP210 and wasn't in the printer descrips, so i downloaded and installed the most recent driver for it from Canon, which is noted as good for 10.5 etc (and is CUPs to boot).
its Installer runs just fine... but printer still does not show up in Add Printer, despite restarts, printer attached, not attached, whatever. printer is not in list, "Print Using..." shows no options, and "Add" is greyed out.
The printer itself was never used by its former owner, it's like new, so it's not likely broken.
i attempted to repair permissions, and ran into no-go there too. It sticks on acquiring the database, doesn't even get to a progress bar (let it run for almost an hour, no change). Same thing when i start it up/run repair permissions from retail OS 10.5 DVD.
And this on a smallish (60GB) hard drive that has barely anything on it ....she mostly just websurfs and emails. Tho the finder is a bit slow, there doesn't appear to be anything wrong with the mac (it's an iBook G4) and it passes disk first aid fine.
Suggestions?

lisajoy wrote:
Any idea why Permissions Repair doesn't progress, neither from hard disk nor from DVD? From other posts i've researched here, repaired permissions apparently allowed some canon printers to show themselves.
If Repair Permissions is not completing then something would be amiss with the OS. But I've never a repair permissions resolve a printer not appearing in the Default browser view. It could certainly fix an issue with the printer being seen but the driver not being found. But for the printer not to be visible in the Default view when it is connected to the Mac via USB, then I don't believe a permissions repair will resolve this - especially also if the printer is not visible in System Profiler. Personally I found a reset of the printing system rather than a repair disk permissions to be more helpful.

Please can anyone help. I am trying to reconect wirelessly my Macbook pro laptop to a canon mp600r printer ?

HI.Can anyone help please. I'm trying to wirelessly reconect my Mac book pro laptop to my canon mp600r wireless printer. I had it working once but after having secured my linksys router ( set a password ) it no longer conects wirelessly but it works with a cable.

You need to run through the wireless network connection wizard on the printer. Try looking under Menu or Setup choices on the printer's LCD. It should be no different than what you did initially with it, except this time when you pick your WIFI network from the available list, it'll ask you for a password, at which point you type in what you set it up when you secured your network. Once you've done that, your laptop will see it again... you shouldn't have to reload any drivers or add it back on, it'll just see it again since it's just the network connection that's broken.
BTW, I hope you chose to secure your WIFI network with WPA2/AES encryption. If not, you might as well take the time now and just reconfigure it again to secure it with that and then fix your printer connection. It's the most secure.

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

Error when trying to add printer on USB Print Server

I'm attempting to connect to a Canon MP530 printer via a Netcomm NP3680 USB Print Server.
When attempting to add the printer via the Print & Scan process, the USB port is seen by the MacBook and listed - ie: mini_me-3-usb2, and the driver is selected automatically without any problem after gathering printer information, however the macbook is unable to connect and returns the error: "An error occurred while trying to add the selected printer."
If a manual configuration is attempted the message returned is: "An error occurred while trying to add the selected printer. Unable to communicate with the printer at this time." Further manual config via the IP address will allow the printer to be entered, however the printer is non-responsive.
I have setup this printer via the same Print Server on the same Macbook prior to this and it setup and worked correctly - the same setup is working correctly on my wife's macbook. However I had to remove the setup on my Macbook and can't get the printer functioning again on this particular Macbook, or my son's.
The direct connection setup via USB directly works without any problem at all.
I'm currently running OSX 10.8.1, however my son is running 10.7.x and has the same problem. My wife's macbook is also running 10.7.x and is working fine.
Can anyone throw any light on this issue - it is truely frustrating, especially when I know it has worked in the past.
thanks very much in advance
GDT

After 55 views and 0 replies, and a number of calls to Applecare (without success) , I decided to once again troubleshoot the problem.
Fixed!
Bearing in mind, I had no other printers already set up in the Print and Scan window....
I removed the following items from the /library/preferences directory:
"com.apple.print.makequeues.plist",
"jp.co.canon.ij.print.filter.raster2canonij.plist",
"jp.co.canon.ij.print.utility.command2canonij.plist",
"org.cups.printers.plist"
I also removed all items from the /library/printers directory (including Canon, PPDs, plist files and icons)
Then I retried to install the printer..... (holidng my breath) and the Console showed:
Repairing access permissions of "/Library/Printers/InstalledPrinters.plist"
All is fine now

Error when trying to add a printer in the network

I set up a network at home w/2 Airport extreme units. One as the main unit and one as remote base station.
I connected a printer to the usb port of the remote base.
When I try to add this printer to my Mac I can see it (under bonjour printers) but I get an error each time I try to add it (Error: -9672)
Any help will be appreciated

Two trips to the Apple Store solved it, with Canon input which helped to isolate problem.
First Trip: At the Apple Store, with my MacBook Pro, Time Capsule & Canon Pixma IP 5000 printer, wireless printing worked just fine, but at that time, the Genius did not connect TC to the internet. Here are the sequence of steps done by Genius Bar:
1. Connect USB cable between Time Capsule & printer.
2. Power on Time Capsule; waited til light was yellow flashing, meaning it was powered up. Genius ignored TC's alert that we weren't connected to internet
3. Plug in printer.
4. Turn printer on.
5. System Preferences > Print & Fax preference > Click + sign to add printer. Printer appeared under bonjour printer, and then hit Add button. Selection worked and we could print at the Apple Store.
At home, I did not initially have success. My light on the Time Capsule was green. I remembered the Genius did our test with the TC light flashing yellow as he was not connected to the internet. So I started all over again, but this time I disconnected the ethernet cable between my cable modem and the TC. Followed all steps above but this time the Time Capsule light was flashing yellow. And it worked! Wireless printing was functional. Then plugged ethernet cable back into TC, and did appropriate start up. Then tried to print and got message: Error 306 A communication error has occurred.
Contacted Canon tech support. With 2 replies, the bottom line was "Canon does not support the configuration you have inquired about. This does not necessarily mean it will not work, but that Canon cannot provide assistance on this configuration."
Today, Trip 2 to Genius Bar: Brilliant lady did some thinking as I didn't have time this rushed morning to lug printer. She looked at my Mac's Preferences > Security > Firewall and saw my selection: "Set access for specific services and applications, with File Sharing, Printer Sharing, Screen Sharing, and then lots of apps like MS Word, Safari, iTunes, etc. " She said it may be a port problem and suggested I check "Allow all incoming connections". I got home, changed my Security preferences and wireless printing with the TC WORKED and is still working now.
Hope this helps you.

Error 13 message when trying to addd Canon printer

We have a Canon IP2000 USB printer, which we have been using with our Imac for about 8 months. Suddenly we got a failed communication message and it would not print anything. The printer still works when connected to my ibook and it did still print test sheets. We have tried numerous things without success.
We have now uninstalled it and tried to reinstall but Printer setup utility now locates the printer but then comes up with a message saying unable to add printer error 13.
It is very frustrating being unable to print.

Generic print fixes - do these one at a time. Restart and try adding after.
Delete and re-ADD the printer(s) in Printer Setup.
Repair permissions (Disk Utility).
Delete Print Prefs - search for (File>Find) files that start with com.apple.print and delete them all and reboot.
Reset Printing System (new in Tiger) - In Printer Setup, click this menu item found just above Quit Printer Setup.
If there is a downloadable Combination Updater from Apple, use it to re-Update OS X.
Try Printer Setup Repair from www.fixamac.net.
Use a Disk Utility like Disk Warrior to repair the HD.

[SOLVED] CUPS does not list Canon PIXMA MP500 printer in Add Printer

I'm finally getting Arch up on my desktop (second time I've fooled around with Arch seriously) and it's been going smoothly so far. I've hit a roadblock when trying to get my printer (multipurpose Canon PIXMA MP500) set up with CUPS. I've followed the wiki directions on CUPS and "CUPS printer-specific problems" to get it installed. dmesg gives me information saying it's plugged in via USB, and the scanner on the printer works with sane/xsane with no additional configuration. However, CUPS isn't displaying the printer in the Add Printer dialog on the web interface after I've logged in as root; it's giving me Serial Port #1, Serial Port #1, and CUPS-PDF.
I can't find information about an MP500-specific driver, and I don't know if using the MP540 driver is what I need. I'm stumped with this; has anyone tried to install this printer before, or gotten it to work? Thanks!
Last edited by polyphanes (2011-12-06 01:50:22)

Success! I got CUPS to recognize my printer by using cups-usblp and removing usblp from the blacklist. The printer now shows in the add printer dialog on the web interface. I originally had an error "Add Printer Canon_MP500 Error (Unable to get list of printer drivers: Unknown)" when adding the printer; however, after installing the most recent cnijfilter-common from the AUR and a good reboot, I was able to add the printer and select a driver "Canon PIXMA MP500 - CUPS+Gutenprint v5.2.7", and it works!
Marking this thread as solved.

Unable to add canon irc printer

Hi There,
I am looking for some advice. I have a client who has recently purchased an imac running Leopard v10.6. I have added this machine to their domain and set everything up. No problems - considering it is in Malta and I am in Scotland. They have one printer, a canon irc 2380 which they require to be able to print from. I have added this printer using both lpd and ipp, both times the printer is added successfully. When I try to print something using ipp method, the print appears to go but nothing actually comes out the printer. When I try using the lpd method, it asks for authentication? I am currently working on trying to get to its config page to try and enable bonjour but would like some assistance as to why these other methods haven't worked. What am I doing wrong? I doubt that the wrong driver has been installed as I got it from canon directly.
Thanks in advance - Kirsty

Hello Kirsty. If it is the UFR2 driver you have installed, then first of all you do need to use LPD for the protocol. IPP is not supported with this driver.
So with the LPD connection and the authentication, this could be two things.
If you are printing via a Windows shared queue then it can be a Windows authentication pop-up. Entering this users domain account and password is usually enough to allow printing, however if it is the UFR2 driver being used it does not play well with this type of connection. You would be best to configure the Mac to print directly to the iR C2380.
If you do have the Mac configured to print directly to the copier then the other authentication you can get is the built-in Department ID function, where an ID and password needs to be entered to permit printing. Many owners of the colour iR use this system to control colour usage. You can check if the copier has this enabled by entering its IP address into a browser. This will open the internal web page called Remote UI (RUI). If Dept ID management is enabled then you often need to enter an ID and password to get past the login window that you would be presented with. If entering the IP into the browser opens the RUI without entering a password then Dept ID is not enabled, but you can check by selecting the Add Functions button on the left sidebar of the RUI and then opening System Preferences.
If Dept ID is enabled then the ID and password can be entered via the Special Features menu of the driver. This also provides the function to check that the ID/pwd to be used is set in the copier.
Re Bonjour, the Canon imageRUNNER series do not support Bonjour. They do if they have the optional Fiery print controller attached, rather than using the internal Canon board. I think this model would use the imagePASS-J1 so the connection to the internal web page of the copier would show if this is fitted.
Hope this helps for starters...

Trying to add a canon mx715 printer to laptop no success due to updates not available?, trying to add a canon mx715 printer to laptop no success due to updates not available?

Similar Messages

Maybe you are looking for