Trying to add a comp to Media Encoder Queue, but nothing happens. CC

I've tried to uninstall and reinstall After Effects CC and Premiere Pro CC, and I still can not get Media Encoder to launch.

The trouble is that I can't find AME anywhere. Even after I reinstalled After Effects. I've found numerous downloads to update AME online, but can't do anything since I don't have AME in the first place. OS X 10.9.3.

Similar Messages

  • My iPhone 4 died and I have tried charging it and plugging it into the computer, but nothing happens execpt the dead battery thing that pops up when you charge it when it's completely dead.

    My iPhone 4 died and I have tried charging it and plugging it into the computer, but nothing happens execpt the dead battery thing that pops up when you charge it when it's completely dead.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I'm trying to download a game from the app store but nothing happens

    im trying to download Deus Ex: ultimate edition but nothing happens it just stays at 0% and i meet all the requirements i dont know what to do

    HI..
    So your Mac is running v10.7.3 or later? Just making sure. Your profile indicates the iOS 5.1.1 ...
    If you have anti virus software installed, disable that.
    Make sure there's enough free space on the startup disk since the app is 15.51GB.
    Click your Apple menu icon. From the drop down menu click About This Mac then select Storage from the menu.
    Make sure there's a minimum of 15% free disk space.

  • Hello. I dropped my ipad first gen from my chair, about 2 feet above the floor. The screen went black and I can't turn it on again. I have tried holding both buttons down at the same time, but nothing happens. Any help?

    Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?

    You will probably have to contact Apple for repair but before you do try this:
    Turn your iPad upside down on your lap and give it a hard smack on the back.

  • HT4314 when i synced my I pad 2 with my I Mac my games show up in game centre but how do I open the game to play. I have tried clicking on the game I want to play but nothing happens? Can anyone help me with this?

    When I sync my I Pad 2 with this I Mac, my games show in the game centre, but when I click on a game nothing happens. Is there a way to play the games? I have tried many times to open a game like "Angry Birds Star Wars" but nothing. Can anyone tell me what I am doing wrong?

    Maybe this will help:
    Game Center - Using/Troubleshooting

  • Tried to install Mavericks but installation froze.  I tried to go back and click on install button but nothing happens. How can I get Mavericks to install?  I have OSX 10.7.5 currently.

    How can

    Check the App Store Purchases tab to see what shows there - it may be paused.
    So how do I get another copy of the installer as the install button for mavericks doesn't do anything when I click it?
    Download the installer again.
    You can try booting into the Safe Mode using your normal account and see if the installer will run there.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - Mavericks
    Safe Mode - About

  • "Add to Adobe Media Encoder queue" option very slow

    Hello,
    The new "add to Adobe Media Encoder queue" directly from After Effects is great, but it is sooooo much slower than encoding directly from Adobe Media Encoder.
    My comp is very simple : it's a 90 min. length video that I'm trying to convert from 24 to 25 frames. I need a MPEG2 export for DVD, so I can't use AE because there're no option to export to MPEG2 files in AE.
    AME announced 10 hours of encoding, but after 5 hours it was only at a third of completion. So I rendered the movie in DNxHD, then encoded in AME : 1 hour for the DNxHD file, and 4 hours for the MPEG2. Much faster!
    I run After Effects CC (12.1.0.168) and AME CC (7.1.0.74) on a windows 7 system with i5 processor and 8go of RAM.
    Anybody else encoutered this issue?

    Tento wrote:
    As for the higher encoding time of exporting to AME frome AE, do you have any clue ?
    Have you applied any effects to the footage in your After Effects comp? Are you using time remapping or the Time Warp effect? That will slow down the encode significantly. Also, what is the format of your source footage?
    Mind that, depending on what you're asking After Effects to render, encoding a comp via AME may not be as fast as using the Render Queue in After Effects. Feeding frames to AME via Dynamic Link incurs some memory overhead and limitations; for example After Effects can not render multiple frames simultaneously on different processors for Dynamic Link encodes.
    If I were you, I would try to solve the problems with AME transcoding your footage. You should bring the issue to the AME forum.  If you're fully committed to not using AME, I recommend using Premiere Pro, not After Effects, for this type of job.
    Regardless of all the above, I agree with Rick: you shouldn't need to transcode 24fps footage to 25fps for playback from DVD. DVD players will do that frame rate translation for you at playback time. But if your footage is not PAL dimensions (720x576), a DVD player won't necessarily convert the frame size, so transcoding at least the frame size is recommended. Bottom line: I would let your DVD authoring software (Encore?) handle the original file; it should do any conversions necessary when you set the DVD format to PAL.

  • Cannot find "Add To Adobe Media Encoder Queue"

    I just started in AE, and I've got a pretty good grasp on it from all the tutorials out there.
    But I hate the native rendering system in AE, I'd rather use Media Encoder like I have been for Premiere Pro.
    In the Adobe Tutorials, it says Comp > Add To Adobe Media...  but I don't have that option even available. I'm using Adobe After Affects CS6. This wasn't removed in CS6 Was it?

    In After Effects CS6, even though the Add To Adobe Media Encoder Queue command isn't present, you can add your composition to AME by other methods. Either use the File > Add command inside AME, or drag and drop your composition from After Effects to AME. Make sure to save your project first.

  • "Add to Adobe Media Encoder Queue" Missing

    Anyone know why my version of AE CS6 doesn't have the option "Add to Adobe Media Encoder Queue" ? http://t.co/UFTfFXN8VL

    The Add To Adobe Media Encoder Queue command is new in After Effects CC; it does not exist in After Effects CS6 or earlier versions. The command is available under both the File > Export and Composition menus. The keyboard shortcut is CTRL+Alt+M (Windows) or CMD+Opt+M (Mac).
    To add an AE comp to the AME Queue in CS6, you can do any of the following (which also work in AE and AME CC):
    Drag one or more comps from the AE Project panel to the AME Queue panel. (Save your project first.)
    Drag the AE project file from the desktop into the AME Queue panel. Choose a single comp and click OK.
    In AME, open the Add Source dialog: choose File > Add Source OR click the Add Source (plus sign) button in the Queue panel OR double-click in the empty area of the AME Queue panel. Choose the AE project file, click Open, then choose a single comp and click OK.
    In AME, choose File > Add After Effects Composition. Choose the AE project file on the left side of the dialog, then choose one or more comps on the right side.

  • Simple sequence, export media encoder launches,then nothing.

    Simple sequence, export media encoder launches,then nothing.  How can I trouble shoot this.  I have no idea why this is failing.  I have tried a number of options etc. I am using CS4 on vista.

    Harm, I followed your advice.  I am new to this forum and should have looked at the wiki about the 16 questions.  Once I did I noticed that the first item was remove Beta software.  I had beta software for Flash Builder and Flash Catalyst that had also installed (without me noticing) media encoder CS5.
    Once I removed these Beta releases, the Media Encoder went back to CS4.
    Thanks for your response.

  • I'm trying to copy music from my PC to itunes. I open itunes, go to 'file', go to 'add folder to library', select the folder and nothing happens. What am I doing wrong?

    I'm trying to copy music from my PC to itunes. I open itunes, go to 'file', go to 'add folder to library', select the folder and nothing happens. What am I doing wrong?

    Hello there, gleab.
    The following Knowledge Base article reviews the ways to import content into iTunes:
    Adding music and other content to iTunes
    http://support.apple.com/kb/ht1473
    Also keep in mind which formats can be added:
    You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Premiere freezes when sending to Media Encoder Queue

    Hey guys,
    This issue is on all of our computers (Mac Pros and 27" iMacs) and happens on 40% of attempted exports through Media Encoder.
    Here's our new workflow:
    - Export TImeline (Command + M)
    - Send to Media Encoder (Queue button)
    - Media Encoder Opens and Premiere gets hung on "Preparing Data for Export" dialogue
    - Force Quit Premiere and get a dialogue that "There has been a serious error and Premiere needs to close"
    - Reopen Premiere and try again – usually get a clean export (or two on a good day) before it craps out again
    We've sort of gotten used to it but I'm wondering – anyone else having this issue? It's getting annoying (and embarrassing when you're in a client session).
    Doesn't matter what timeline setting or what's on the timeline. Also doesn't matter what version of either program.

    I am having the same problem (see Premiere now freezes on Media Encoder Queue)
    I am on 2014.1 of both programs (8.1.0 on premiere, 8.1.0.122 of AME).  I know an update just came out today, but it seems to be just a RAW photo update.
    Mine hangs when premiere is "Preparing Media for Export..."  It launches AME and AME boots up fine... so from where I sit, it looks like a Premiere problem as it's compiling the project file to export.
    Neither "import natively / non natively" or GPU acceleration help.  However, I wouldn't expect them to, given this seems to be a premiere problem, not an AME problem.
    That thread does not apply re: nView.
    R

  • I am trying to add my brother printer series HL-2270DW, but I keep getting an error message that the software is currently when it tries to install it.

    I am trying to add my brother printer series HL-2270DW, but I keep getting an error message that the software is currently unavailable. How do I fix this?

    I am also having this same problem. I have updated my computer. I have downloaded the complete brother driver package from Apple as well as the drivers from Brother. As far as I can tell, all have been installed successfully. It is only when I try to ADD the printer do I get that message. Both my roomate and I have Macbook Airs so we cant use the disk which came with the printer. This is irrelivant anyway as the drivers have been successfully downloaded and installed. SO FRUSTRATING!!!!! 

  • Media Encoder Queue Processing

    It takes much longer to export a Pr sequence as an MP4 fiel when I put it in the Media Encoder queue than it does if I Export it directly. I assume this is because once the sequence in in the queue the GPU acceleration does not engage. Is it pssible to put sequences in the queue and force GPU acceleration to engage?

    My observation is that a Pr sequence Exported then put into the Queue takes 3 times longer to complete than if I use the Export option (instead of Queue).

  • Premiere now freezes on Media Encoder Queue

    After updating to the Oct 2014 CC Update, upon exporting media using the Media Encoder queue, Premiere freezes on the "Preparing Data for Export" box.  It launches Media Composer, but it never makes it out of Premiere.
    Just exporting from the application works, as well as importing sequences straight into Media Encoder.  But I need the queue to work.
    On a Windows 8.1 PC
    24b 1333 mhz ram
    3.2 ghz Intel Processor
    NVIDIA Quadro FX 3800
    R

    I am having the same problem (see Premiere now freezes on Media Encoder Queue)
    I am on 2014.1 of both programs (8.1.0 on premiere, 8.1.0.122 of AME).  I know an update just came out today, but it seems to be just a RAW photo update.
    Mine hangs when premiere is "Preparing Media for Export..."  It launches AME and AME boots up fine... so from where I sit, it looks like a Premiere problem as it's compiling the project file to export.
    Neither "import natively / non natively" or GPU acceleration help.  However, I wouldn't expect them to, given this seems to be a premiere problem, not an AME problem.
    That thread does not apply re: nView.
    R

Maybe you are looking for