Trying to add a DELL (Lexmark) V715w printer to my MacBook Pro

Purchased a DELL branded Lexmark V715w AIO printer a month or so back.  I was able to install it to my Windows based home system.  When I try and add it to my MacBook Pro and MacBook Air, I cannot get it to print at all.  It will show up in the print and scan Queue fine, but will never print anything when a document or picture is sent to it.
I have tried multiple versions of both DELL and Lexmark drivers, updated the firmware, downloaded the newest MAC Lion drivers to no avail.  I like this printer, and hope that someone can assist me in getting it setup for use.
When I try and complete teh Lexmark Wireless assistant, it hangs at the Connect USB cable screen and never allows the "Continue" button to be selected (stays grayed out), I found a fix for this on the windows side, but nothing for us MAC users.
Any assistantance would be greatly appreciated, starting to get tired of saving to a UB Stick and getting on the Windows machine to print items.
Thanks
JTAV8R

There is a flaw in OS X Lion.
From this article.
http://support.apple.com/kb/HT4670
If the printer is a wireless capable printer and it is connecting to a wireless network, make sure it is properly connected to the wireless network first. The printer may have to be connected to the Mac initially via USB.
As stated in that article the printer may need to be connect directly to the Mac Via USB during the initial setup.
What a joke.
Good luck.
I have an idea. Sell the Mac, don't look back and by a Windows notebook that actually is easier to use.

Similar Messages

  • I'm trying to install a Dell (V313 AIO) printer on my macbook pro.

    I've installed the driver from the Dell website successfully (more than once) but the printer still doesn't show up to be able to add it.  Any tips on how to get this to work?  The driver is for OSX 10.6 and later, so it should work, right (I'm running 10.8.2)
    Thanks

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2

    What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • How can I set up a Dell AIO 922 printer on my Macbook Pro?

    I'm running OS X 10.9.2, and I've downloaded a lexmark 5200 series driver like others have said to do, but when I try to add a printer, nothing shows up.

    Hi jdmyp6!
    Here is an article that can help you set up this printer in Mavericks:
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    You can also use this following article to find the correct printer software to download for your printer:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • HT1800 Trying to add a wireless printer to my MacBook Pro.  It was working properly until we had to buy a new modem.  I have gone through the steps associated with my printer and the other laptop in the house (Dell) working right. MacBook says printer dis

    I am trying to add a wireless printer to my MacBook Pro.  It was working properly until we had to get a new modem.  I have gone through the steps with the printer customer service rep, and it was working properly for one day.  When I booted up the next morning, the printer was no longer "connected".  It will work if I have the printer and computer connected, but I much prefer the wireless capability.  Suggestions? The printer is a Brother MFC7860DW.  The other laptop in the house (Dell) can print wirelessly so I don't think it's an issue with the modem or the printer.

    Hello,
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • I am trying to add a toshiba commercial  network printer to my air book , its no t working !

    i am trying to add a toshiba commercial  network printer to my air book , its no t working !

    What format is the drive?

  • After downloading the hp 3054A software I cannot add the printer to my macbook pro

    I recently tried to add my hp 3054A printer to my macbook pro.  After downloading the software from hp's website I tried to add the printer to my macbook pro and keep getting the error message The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software.  This is after I initially get the message  Software for this printer is available from Apple. Would you like to download and install it?
    I have tried adding HP printer software from Apple's site but that did not help.  Any help with this is much appreciated!
    Many Thanks,
    Izumi

    For OS X 10.8 or later:
    OS X Mountain Lion: Reset the printing system
    For earlier versions of OS X:
    Mac OS X: How to reset the printing system

  • How can I install a Dell A10 810 printer on my Macbook?

    how can I install a Dell A10 810 printer on my Macbook?
    Thanks

    Just double-click the zip file to open it.
    There is no Mac version of Access, so how you're going to open the Access file remains to be seen.

  • How do I add a printer to my macbook pro from my home wireless network?

    I have a wireless network that includes a printer, a pc, and my MacBook Pro.  When I go into system preferences and printers the wireless printer does not appear in the list.  What do I need to do to add this wireless printer to my MacBook Pro?

    Which os do you have?
    Check Apple's Knowledge Base for Printer Troubleshooting solutions and suggestions for your particular os.

  • Does a dell c2660dn printer work with macbook pro?

    does a dell c2660dn printer work with macbook pro?

    According to their site, they offer no drivers for Mac, or mention anything about Apple.
    I would say no.

  • How do you setup a canon mp620 to print from a Macbook Pro?

    How can i print from my MacBook Pro with a canon mp620 printer? I have the printer setup with a PC via USB and want to add the MacBook as a new computer and print wirelessly. I have tried the installation cd and updated drivers from canon website but it still wont work.

    I have managed to get my working. Firstly, I googled the CUPS drivers for the printer and then downloaded those from canons website. I then went to print and scan in system preferences and noticed that the printer had appeared there. I believe it was those drivers that made the difference but i was fiddling for hours before that so i cant be 100% sure how i got it to work.

  • Why can't my iPod touch add apps when using it with my new macbook pro?

    I've had my iPod touch (4G 64GB) since christmas 2010. I was syncing my ipod with a windows vista dell desktop. I bought a Macbook Pro 15" for college about two weeks ago. When I plug my iPod into my macbook it will manually add music but I tried adding a couple apps and it did nothing. Also on the iPod summary screen if I go to apps I can see my app layout but i can't move the apps and they are semi-see through. HELP ME!!!!!

    Something happened and yo have to restore via iTunes. Backup to iTunes if yo can and then restore from that backup
    All old devices can sync with the newest iTunes

  • Epson RX620 will not print with my MacBook Pro. Error:/ System/Library/ Pri

    I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri... can anyone help?

    skeeter694 wrote:
    I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri...
    Welcome to Apple's discussion groups.
    What's the rest of that error message? Posting what you did is similar to posting as an error message the text "I'm having trouble with ..." with nothing following.
    I'd try several things until things work:
    1) Open the Print & Fax panel of System Preferences. Right-click on a printer entry and choose "Reset printing system".
    2) Delete the entry for your printer, then add it back.
    3) Check the Epson Web site for a recent driver for your printer. Download it, then first run it in "uninstall" move, then in "install" mode.
    I'll be personally interested in what you learn. I have a relative who has an RX620 and 10.6.4, but I'm not sure he's tried to print anything yet.

  • HT1800 Cannot reconnect my printer to my Macbook Pro

    I am trying to add a printer to my MacBook Pro and I have deleted all existing printers and reset - but I still get the message "maximum number of printers that can be added has been exceeded" - how do I fix this? Note - I have previously used this printer

    Hello, try this...
    Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Reinstall the Printer Driver.

  • Trouble setting up wireless printing between my Macbook Pro w. Mountain Lion 10.8.1 and my HP C4780 Printer

    Hi all,
    I'm having a frustrating problem trying to set up the wireless printing between my Macbook Pro 13" to my HP C4780 printer. I had no problem installing and configuring this before on my previous computer, a Macbook. However, when I got my new computer (the Macbook Pro), my wireless network wont show up when I try and install the wireless capability during the printer setup. I had to buy a new router and set up a new network around the time I got my new computer, so I wonder if this has something to do with it. My wireless network is a WPA/WPA2 personal, but so was my old wireless network with the old router and I didn't have a problem installing the wireless. I thought I might not have had the most up-to-date driver for the printer software, but I do. So, i'm stuck! Any thoughts??

    Go here and download all the manuals and read them on how to set up your printer.
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=3422866&
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

Maybe you are looking for

  • Multiple attachment download in mail

    Have an email with 18 attachments (word and excel stuff)  is my only option to click (or right-click) each one to download them?? or is there a quicker (read simpler) way. This is via web browser iCloud, as I'm running an older macbook Pro.....

  • Problem with FOR ALL ENTRIES statement

    Hi all please find the problem in the select statement. SELECT vbbe~vbeln          vbap~vstel          marc~dispo          vbbe~matnr          vbbe~kunnr          vbbe~werks          vbbe~mbdat          vbbe~omeng   INTO TABLE l_t_dvbeln   FROM vbbe

  • I can't upgrade my Aperture libraries since update to 3.3 (3.3.1)

    Since I update my Aperture to the 3.3 version (included the latest update which is 3.3.1 I think) I'm unable to upgrade my libraries, which are located on 2 external HDs, via USB. My macbook has only 11.68 GB of free space, and one of the libraries i

  • Sequence-RenderOnly-Mixdown crashes - Out Of Memory

    Out of Memory trying to use FCE Sequence->RenderOnly->Mixdown. The video that crashes is 19:30 min in length (and others as well). Plenty of memory (actual=3GB: recognized as 2GB: SysSettings->Memory&Cache shows 1649Mb = 90%); Plenty of disk set as F

  • Adding one more system in existing stms landscape

    Hi Gurus, I am trying to add one sandbox system to my present landscape configure TMS for four systems, out of which two systems (DEV1 and DEV2) are with same SID (DEV). As recommended by SAP, I understand that there can not be two systems with same