Trying to add a flash please help

I cannot seem to add a flash at the very begining of my clip please someone help

Some effects "fade" in, and don't fully show for the first couple of frames. I run into this with the "Striped subtitle" effect all the time. It takes about 20 frames for the subtitle to show up in full strength. The workaround I found for starting a movie with a striped subtitle in the first frame (so that the movie thumbnail shows the subtitle) goes like this:
First, I pad the beginning of the movie with some extra filler footage. Then I apply the effect, starting at the added filler footage. Once the effect is rendered, I remove the filler footage, and presto, the effect starts in full force on the first frame!
Maybe you can use the same trick to get a flash to show up at the very beginning of your clip.

Similar Messages

  • My iPhoto won't open. It says "Your photo library is either in use by another application or no longer readable." Please tell me I haven't lost all my pics?! I do not have them backed up. I have tried restarting my mac. Please Help!

    My iPhoto won't open. It says "Your photo library is either in use by another application or no longer readable." Please tell me I haven't lost all my pics?! I do not have them backed up. I have tried restarting my mac. Please Help!

    What haven't you backed them up? You should always have a back up of any important material on your Mac. Make one now:
    Most Simple Back Up
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex:
    Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
    What version of iPhoto do you have?

  • I am trying to split a document please help?

    I am trying to split a document please help?

    Easy with Acrobat, but not possible with Adobe Reader.

  • I can't get Firefox 10.0 to recognize 1password 3.8.15. The extension doesn't stay as an add-on. Please help!

    I can't get Firefox 10.0 to recognize 1password 3.8.15. The extension doesn't stay as an add-on. Please help!

    1passowrd team released support for Firefox 10 already. Do an autometic update and check.See:
    * http://support.agilebits.com/discussions/1password-for-windows/487-firefox-100-doesnt-support-1password

  • How to add fingerprint to 5s? I can`t press add a fingerpint please HELP ios 8,0,2

    How to add fingerprint to 5s? I can`t press add a fingerpint please HELP ios 8,0,2

    Hi, SillDeividas.  
    Thank you for visiting Apple Support Communities. 
    Here is an article that I would recommend taking a look at for this issue.  
    Get help with Touch ID
    Make sure that you're using the latest version of iOS.
    Make sure that your fingers and the Home button are clean and dry.*
    Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
    If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
    Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
    Try enrolling a different finger.
    If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
    * Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
    iPhone 5s: Using Touch ID
    http://support.apple.com/kb/HT5883
    Cheers,
    Jason H.

  • My ipod touch will not turn on, charge, or isn't recognised by itunes or my computer. I've tried most common fixes. Please help!

    Hi. Last week, in this hot weather, my ipod (8gb, 4g) started flickering , screen went white and then it died! Left it off for 24 hrs to cool down and eventually it powered up again. Thing is, I needed to charge it and so put it on a dock but it wouldn't charge. Tried a diff dock, ac charger and apple usb cable to my laptop and nothing. Battery nearly completely drained, just get the flashing battery with lightning symbol when I press the on button. Not recognised by itunes or my computer and all the advice says to charge it and try again but mine doesn't seem to be charging despite being on a charger for several hours! Tried pressing on and home keys together for diff periods of time (up to 5 mins once) but still nothing. Not even getting to the apple logo stage Can someone out there please help me??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Also
    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • Actiontec GT701C DSL light keeps flashing please help

    I use to have the WIFI router from verizon but the wifi range was not strong enough for certain items in my home... in addition the items could not even find the network on wifi. i replaced it with a Actiontec GT701C so i could use my old wireless router that was strong enough to support my whole home .. But know when i connect my DSL line to the New modem the GT701c i can not access the internet .. i Could get to the configure screen but other than that the DSL Light keeps flashing any suggestions.. i have rebooted the modem and tryed diffrent phone line and phone jacks in my home please help !!!

    Does your older modem connect still? If so, could you tell us which modem it is so that we could help you obtain the Transceiver Statistics from it? It's possible the ActionTec could either be defective or it could be sensitive to noise on the line if the signal isn't the greatest.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Another person who has a problem with Flash - Please Help!!

    I have a Dell Dimension 4700 Intel (R) Pentium (R) - 4 CPU   2.80 GHz    2.79 GHz    504 MB of RAM
    For a few years now I would have to restore the computer to an earlier time after an update was done in order to view youtube, etc.  It seemed that when my computer did an automatic update it would mess up the flash player.
    My husband just recently did another update and now the flash isn't working and the computer won't restore anymore.
    I keep getting the following messages:  adobe flash player active x set up failed to install 19166
    program error:  failed to register      status installation complete
    I have uninstalled and installed the flash several times
    everytime i go to install flash it says:  Adobe Flash Player 10:  This application has been downloaded before.  Reload?
    Then I get:  Your security settings do not allow websites to use ActiveX controls installed on your computer.
    I don't want to take this somewhere because I have a feeling that will just wipe the computer clean and I have a feeling it is something stupid that I'm not doing.
    Please Help.

    OK...Check, check...did all that. I am cutting and pasting a segment from the flash troubleshooting page because its exactly what is happening to me. There were no responses to help this person.
    "I've tried installing flash player 9 but am not able to do so. It will begin installing but when it gets to 'items remaining: 4' the progress bar continues to move and underneath says searching but nothing happens. I tried leaving it on all night but same thing when I came back in the morning. When I close the installer it then says 'stopping now may result in an incomplete set of software' Also, when I tried uninstalling previous versions, the uninstaller does nothing. It says 'items uninstalled: 0' and 'processing', but same thing, the thing spins but nothing happens. i tried the other steps given to see if that helped but nothing seems to work."
    Here is the page...
    http://sdc.shockwave.com/cfusion/webforums/forum/messageview.cfm?forumid=44&cati d=184&threadid=1267248&enterthread=y#4577694
    I tried some of the suggestions above the last two posts. But it looks like my problem is the same as those.
    I even tried to post on there but from what I see it looks like I have to have flash to do it...I get the page with the blue lego brick.
    I'm pulling my hair out. I didn't realize how much of the internet ran on flash.

  • Creating eLearning Content Using Flash - Please Help

    I am tasked with creating eLearning training using Flash. I know how to create flash movies, tweens, etc. I am also pretty well versed with Dreamweaver, HTML, etc.
    But how do you create the fixed header and a footer with navigation and the navigation between 30 to 40 "pages" or "movies"? I am assuming there is some automated method to create navigation...
    We want a fixed header, fixed navigation in a footer, movie content in the center, and the ability to automatically move from "page" to page and also allow the student to click Next and Previous buttons to move from page to page.
    I would greatly appreciate a link to a tutorial or any advice on getting started.
    Thanks,
    Jack Loganbill

    Miss_Angela wrote:
    > I am trying to create a flash intro like this one....
    >
    >
    http://www.mark-knopfler-news.co.uk/
    >
    > I am really new to flash and don't know much beyond
    making menus. I have
    > looked at different tutorials, but I don't see anything
    about how to create an
    > intro like this one.
    Check in help under the Tutorial section for "Add motion
    tweens"
    Basically you need to import your images, convert them to
    instances like
    movie clips or graphics symbols then motion tween them to get
    them move
    and use color effect Alpha to get them to fade in.
    Check the help first and tell me how far can you get from
    there, whatever
    problem you face, post back, will help you go ahead with it.
    Best Regards
    Urami
    Beauty is in the eye of the beer holder...
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Delete Flash, please help!

    Hi, how to delete complet flash for reinstall again.
    Full delete fron windows registry. Because, wen i delete from
    add/remove programs, and reinstall, the problem persist.
    I want that it takes me like a clean installation, as if
    outside the first time that I install.
    Please Help!!
    Thank you very much!

    Hi. I had the same problem. You have to download the flash
    un-installer from this web site. I forget how I found it, but if
    you search for it under "Search" on this web site, you'll probably
    find it. I think that is what I did. Once you have downloaded it,
    you have to run it and it will uninstall flash. Carefull though.
    Once you remove it, you cannot re-install it from this web site.
    Check that you have "Flash.exe" on your computer. I found mine in:
    C:\WINDOWS2\SYSTEM\MACROMED\FLASH.
    The icon is a circle colored grey with a small " f " in it.
    This will download Flash again for you. I don't know why it is not
    shown in the Macromedia web site. I couldn't find it here myself.
    Hope this helps. I'm running Windows98.

  • MB Dead now after flashing, please help!@

    Writing this on my old p1.
    I just flashed my Neo 2 865PE to 1.4 and now it wont boot!
    On my bracket on the back the top right one is red rest are green..
    What now? Am I screwed? Nothing but problems with this MSI board I tell you....
    Please help!

    Get 1.3 from the website if that's what your board came with originally. If it's not, get the one that came with your board. The reason I say that is that is, at least for me, the flashing program says there is a Bootblock Mismatch with all other bios' except what came with my motherboard.  ?(
    Make that backup disk and remane that bios file for your board to AMIBOOT.ROM. and have it in.
    Unplug your power. Take out your RAM. Clear the Cmos via the jumper, I believe it's JBAT1. Put your RAM back in. Then power up. Maybe have someone turn on the power while you hold down the Ctrl + Home Key. You really have to be fast. When you get your floppy, the board will read from it and restore your bios - then beep 4 times. It will then reboot. If you're lucky, all will be ok and you can go in and reset your settings in the Cmos.
    I want to make this suggestion to anyone who flashes their bios': Have that backup disk in while you flash. If the flash goes bad, when you hit the reset button, immediately the boot block will hunt for that AMIBOOT.ROM file. If you shut down your power with the power button, your system won't power back up. You will swear it's dead. You won't get it back until you unplug your power cord, clear your cmos, reset your RAM, power back on and IMMEDIATELY hold down the Ctrl + Home Key. I really don't know what is going wrong with these bios releases, but for some boards, they appear to kill the board. I'm convinced that I will never be able to use any other bios but 1.3. There is a glitch in the chip evidently. With the bios that came programmed on the chip, you can, seemingly, get your board back. At least, that's been true for me.    
    Just keep trying. I believe you can get your board back. The boards are really nice but really finicky.
    Mark

  • Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

    Hi,
    Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

    Hi Shilpa ,
    Please refer to the following link and see if that helps you out.
    https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
    Are you trying to access the PDF with Acrobat or Adobe Reader?
    Regards
    Sukrit Dhingra

  • PDF files don't open I have tried EVERYTHING to no avail please help

    In the last couple of weeks I cannot open PDF files in Firefox. They open fine in Internet Explorer. I have been on the support forum now for over 2 hours and tried EVERYTHING suggested to no avail. It appears this is a common problem.
    Please help.

    Check your settings under '''''Firefox Options > Applications'''''. Make sure
    the PDF settings.

  • Text editable in images in flash Please help

    Hello
    Dear All Friends
    I want to make text editable in images in flash to get copy from text
    can i Make this
    and other question please
    can i convert text in image in flash to normal string ?
    please help
    Thank you

    Images do not store text data in any isolateable manner, it is comprised of just pixels like anything else in the image.  You would need to develop some form of complicated text recognition program to be able to extract text from an image, and I don't believe anyone has.

  • My playlists dont show up on my ipod and I can't sync them back on. I tried restore and nothin happened please help.

    My playlist dont show up on my ipod anymore and I can't sync them back. I tried restoring but that didnt work.what do I do? please help thanx.

    daxfrompomona,
    This is the wrong forum to post on, this is a forum for folks that have Intel based iMacs. According to your profile it indicated you are using an iPod Nano and use Windows Vista. I'd recommend either reposting in the iPod or iTunes for MS Windows forums.

Maybe you are looking for