Trying to add a new node to OAS

I'm trying to add a new node to our OAS server, and it always fails. Any hints on what I might be doing wrong?

every entry in an ldap directory must have some mandatory attributes, e.g. "objectClass". which objectclass your entry should belong to? add the objectClass-attribute to your entry!
Regards!
Rainer

Similar Messages

Using depth first traversal to add a new node to a tree with labels

Hello,
I'm currently trying to work my way through Java and need some advice on using and traversing trees. I've written a basic JTree program, which allows the user to add and delete nodes. Each new node is labelled in a sequential order and not dependent upon where they are added to the tree.
Basically, what is the best way to add and delete these new nodes with labels that reflect their position in the tree in a depth-first traversal?
ie: the new node's label will correctly reflect its position in the tree and the other labels will change to reflect this addition of a new node.
I've searched Google and can't seem to find any appropriate examples for this case.
My current code is as follows,
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.tree.*;
public class BasicTreeAddDelete extends JFrame implements ActionListener
    private JTree tree;
    private DefaultTreeModel treeModel;
    private JButton addButton;
    private JButton deleteButton;
    private int newNodeSuffix = 1;
    public BasicTreeAddDelete()
        setTitle("Basic Tree with Add and Delete Buttons");
        DefaultMutableTreeNode rootNode = new DefaultMutableTreeNode("Root");
        treeModel = new DefaultTreeModel(rootNode);
        tree = new JTree(treeModel);
        JScrollPane scrollPane = new JScrollPane(tree);
        getContentPane().add(scrollPane, BorderLayout.CENTER);
        JPanel panel = new JPanel();
        addButton = new JButton("Add Node");
        addButton.addActionListener(this);
        panel.add(addButton);
        getContentPane().add(panel, BorderLayout.SOUTH);
        deleteButton = new JButton("Delete Node");
        deleteButton.addActionListener(this);
        panel.add(deleteButton);
        getContentPane().add(panel, BorderLayout.SOUTH);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
        setSize(400, 300);
        setVisible(true);
    public void actionPerformed(ActionEvent event)
        DefaultMutableTreeNode selectedNode = (DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
        if(event.getSource().equals(addButton))
            if (selectedNode != null)
                // add the new node as a child of a selected node at the end
                DefaultMutableTreeNode newNode = new DefaultMutableTreeNode("New Node" + newNodeSuffix++);
                  treeModel.insertNodeInto(newNode, selectedNode, selectedNode.getChildCount());
                  //make the node visible by scrolling to it
                TreeNode[] totalNodes = treeModel.getPathToRoot(newNode);
                TreePath path = new TreePath(totalNodes);
                tree.scrollPathToVisible(path);
        else if(event.getSource().equals(deleteButton))
            //remove the selected node, except the parent node
            removeSelectedNode();
    public void removeSelectedNode()
        DefaultMutableTreeNode selectedNode = (DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
        if (selectedNode != null)
            //get the parent of the selected node
            MutableTreeNode parent = (MutableTreeNode)(selectedNode.getParent());
            // if the parent is not null
            if (parent != null)
                //remove the node from the parent
                treeModel.removeNodeFromParent(selectedNode);
    public static void main(String[] arg)
        BasicTreeAddDelete basicTree = new BasicTreeAddDelete();
}      Thank you for any help.

> Has anybody got any advice, help or know of any
examples for this sort of problem.
Thank you.
Check this site: http://www.apl.jhu.edu/~hall/java/Swing-Tutorial/Swing-Tutorial-JTree.html

I am trying to add a new credit card and it keeps telling me that I have to enter a valid security code...I have tried 2 different cards and it is doing the same thing. How do I get past this?

I guess it has been a year since I last purchased something on I-tunes and my account is saying that they couldn't authorize my card for some of my purchases. I am trying to add a new credit card to clear this up and it keeps saying that I have to enter a valid security code. I have tried 2 different cards and I get the same thing. I have also added an I-tunes gift card and that isn't clearing up the money that I owe. It is showing that I have a $25 credit for that. How do I fix this, I have been trying for days and all I have got from the e-mail tech support is that its my credit card issuer that is causing the problem. Thats not correct because one of the credit cards that I am trying to use, is a prepaid Visa gift card. I know that these work on I-tunes because I have used them before in the past. I am getting very frustrated with this whole process, I just want to clear up my account and buy some new music!! HELP!!

You probably ran into blocks & locks.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
They'll sort it out.

JTree: HOW TO add a new node

Hi everybody,
Im going to try to be clear...
My problem is the following: I am a beginner using JTree and what I want to do is to add a new node in a certain position in my JTree. I would be very grateful if apart from explanation, any of you could provide me with a piece of code.
Let us think that my tree has the root and some first-level children called group 1, ..., group n. Every group has some children called rulemodule 1, ..., rulemodule m. And every rulemodule has some children called rule 1, ..., rule j.
An example of the visual look of my jtree:
root
__ group 1
____ rulemodule 1.1
______ rule 1.1.1
____ rulemodule 1.2
______ rule 1.2.1
______ rule 1.2.2
______ rule 1.2.3
__ group 2
____ rulemodule 2.1
______ rule 2.1.1
____ rulemodule 2.2
______ rule 2.2.1
Then, let us say that what I want is to add a new rule in the position where it is in this moment rule 1.2.2 (so the rule that was 1.2.2 before would be now 1.2.3, and the one that was 1.2.3 would be now 1.2.4). So I know the name of the group, the name of the rulemodule and the position of the new rule. How could I do that?
In order to build the JTree I have the following statements:
TreeNode treeNode = fillTheTree(ruleModulePart.config.getRuleModules()); This function actually builds the tree.
jTreeModel = new DefaultTreeModel(treeNode);
jTree = new JTree(jTreeModel);
Thanks a lot to everybody!
Fran.

Thanks a lot for your answer Maxideon,
Well, I think that I did not explained it the problem very well...
The example of the tree was just that, an example, but the tree does not look like that. I just wanted to show that the tree has 3 levels of depth.
The declaration of the function would actually be like that:
public void UpdateJTreeWithNewRule (String groupName, String ruleModuleName, String newRuleName, int positionOfNewRule) {
}So I think that I would need to do first a search to find the position of the "group" which corresponds to that 'groupName' and after that the position of the "rulemodule" which corresponds to that 'ruleModuleName'. And then add the 'newRuleName' in the position 'positionOfNewRule' inside that "rulemodule".
Thanks a lot again,
Fran.

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

Error while trying to add a new field in search criteria by VO extension

Hi,
I am trying to add a new field by using the VO extension to a seeded OAF page used to search Repository contracts.
I get the following error on opening the page after I have compiled my code on server and bounced apache.
Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME =SSPN_AdvancedSearchAttributesPVO; APPLICATION_MODULE = oracle.apps.okc.repository.search.server.ContractsAdvSearchAM;
I extended the AM also after this to include the extended VO but still the error comes.
This page is a dynamic search page where the results change based on the different search criteria.
Cheers
Swati

Hi,
I extended the AM also after this to include the extended VO but still the error comes.There is no need to extend the AM for extending a VO. Hopefully the VO which u extending already attached to the AM oracle.apps.okc.repository.search.server.ContractsAdvSearchAM.
Regards,
Gyan

2 yrs worth of music on my ipod nano 5th gen just vanished while I was trying to add four new tracks.

Most of the music I've put on my ipod nano 5th gen in the last 2 years just vanished while I was trying to add four new tracks. Stuff from before that seems to be still there (I add stuff manually, not sync, and the ipod wasn't full). It was a bit glitchy as soon as I plugged it in to update - threw up a few error messages, decided to verify my ipod a couple of times, After that, once or twice itunes seemed to lose the ipod completely, although as far as the laptop was concerned it was definitely still connected, so i went for the 'safe to remove hardware' option and reconnected...
I'm guessing somewhere in the midst of whatever was going on there, something got confused or corrupted, but I have no way to tell what... Ipod seems to think it is using less of its capacity now, but I don't know whether to believe it or not!
Can I get this stuff back? It's not just stuff I bought from itunes, either - things I put on from cds have gone too. I have all the music either backed up or on cds, but I'm not in the same country as my cds right now - also rebuilding all of my playlists and trying to remember what went where is going to be a pain! Is there a quicker way than just doing it all over again?

Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081

My iphone 6 plus after updating to IOS 8.2 the touch id doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' .

my iphone 6 plus after updating to IOS 8.2 seems to have a problem with the touch id witch doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' . I have multiple fingerprints and none of them appear to work.

Hi Giannis,
If you are having an issue with Touch ID not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
Use Touch ID on iPhone and iPad - Apple Support
Start with the section titled Clean the Touch ID sensor and then Get help with Touch ID.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

I need to add a new node to RAC Oracle 10g R2

I need to add a new node to RAC Oracle 10g R2.
what is the best mode.
cloning or step by step?
SO: Solaris 64bit
Message was edited by:
ACS

Hi All,
I get the following error eventhough I have followed the instruction for Solaris R2. The instruction is enclosed. Please Advise! Thanks.
/app/cluvfy/runcluvfy.sh stage -post hwos -n nod1 -verbose
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Post-check for hardware and operating system setup was unsuccessful on all the nodes.
=========================
1. Log in as the oracle user.
2. If necessary, create the .sshdirectory in the oracle user’s home directory and
set the correct permissions on it:
$ mkdir ~/.ssh
$ chmod 700 ~/.ssh
3. Enter the following commands to generate an RSA key for version 2 of the SSH
protocol:
$ /usr/bin/ssh-keygen -t rsa
At the prompts:
¦ Accept the default location for the key file.
¦ Enter and confirm a pass phrase that is different from the oracle user’s
password.
This command writes the public key to the ~/.ssh/id_rsa.pub file and the
private key to the ~/.ssh/id_rsafile. Never distribute the private key to anyone.
4. Enter the following commands to generate a DSA key for version 2 of the SSH
protocol:
$ /usr/bin/ssh-keygen -t dsa
At the prompts:
¦ Accept the default location for the key file
Pre-Installation Tasks 2-11
Creating Required Operating System Groups and User
¦ Enter and confirm a pass phrase that is different from the oracle user’s
password
This command writes the public key to the ~/.ssh/id_dsa.pub file and the
private key to the ~/.ssh/id_dsa file. Never distribute the private key to
anyone.
Add keys to an authorized key file: Complete the following steps:
1. On the local node, determine if you have an authorized key file
(~/.ssh/authorized_keys). If the authorized key file already exists, then
proceed to step 2. Otherwise, enter the following commands:
$ touch ~/.ssh/authorized_keys
$ cd ~/.ssh
$ ls
You should see the id_dsa.pub and id_rsa.pubkeys that you have created.
2. Using SSH, copy the contents of the ~/.ssh/id_rsa.puband
~/.ssh/id_dsa.pubfiles to the file ~/.ssh/authorized_keys, and provide
the Oracle user password as prompted. This process is illustrated in the following
syntax example with a two-node cluster, with nodes node1 and node2, where the
Oracle user path is /home/oracle:
[oracle@node1 .ssh]$ ssh node1 cat /home/oracle/.ssh/id_rsa.pub >>
authorized_keys
oracle@node1’s password:
[oracle@node1 .ssh]$ ssh node1 cat /home/oracle/.ssh/id_dsa.pub >>
authorized_keys
oracle@node1 .ssh$ ssh node2 cat /home/oracle/.ssh/id_rsa.pub >>
authorized_keys
oracle@node2’s password:
[oracle@node1 .ssh$ ssh node2 cat /home/oracle/.ssh/id_dsa.pub
authorized_keysoracle@node2’s password:
Note: Repeat this process for each node in the cluster

Trying to add the new year 2012 to posting periods

I am trying to add the new 2012 months in posting periods in order to allow us to post some invoices that have terms due in 2012. First, when I go to add a new period the "category" feild is missing. Im guessing this has to be added somewhere else but I am not sure. Second, When I go to add the actual month for January 2012, I get the error "Enter Valid code [Posting Period -Period Code], '-' [Message 173-36]. Not really sure why I cant add this but I am guessing there is a step before I am missing. Any suggestions please...thank you!

I figured out how to add it, I was adding the month as 2012-01, yet I only had to put 2012 and it would pre-fill in the dates then. Thanks anyways!

I am trying to add some new software and am told I have an incorrect software that I already confirmed is correct. Can anyone help???

I am trying to add some new software and am told I have an incorrect software that I already confirmed is correct. Can anyone help???

Please confirm you are actually running the ancient OS 8.6.
What software is this?

Hi experts, Since i am trying to add a new field in pa0006 ...the sap stan

Hi experts,
Since i am trying to add a new field in pa0006 ...the sap standard view t528c has been modified..how can i restore the old view(total fields has been changed)

Check the version mangement and retrive the request with your old changes.

Get an error when trying to add a new object!

Post Author: zhaodifan
CA Forum: Administration
I was trying to add a new object from central management console and I got the following error:
Retrieve Error
There was an error while retrieving data from the server: Failed to read data from report file C:\WINNT\Temp\pres_report.rpt. Reason: Operation not yet implemented. File C:\WINNT\TEMP\tmpreport\~ci226c521bf2923e0.rpt.
The report I am trying to add was running on a Linux box with the same version BusinessObjects Cyrstal 11 running. I want to move it to a Windows box... The report itself shouldn't have problems because it was running fine on the linux box...
Also want you let you know that I don't know too much about Crystal Report and our Crystal Report admin quited his job last week! I will be very appreciated if anybody can give me any advice. Thank you!
Difan

If this is a Gmail account you might need to unlock by going here: https://accounts.google.com/DisplayUnlockCaptcha.

Creative cloud keeps crashing after trying to add a new font?

I recently tried to add a new font to my library with typekit. As soon as the download was complete, at the point where it should have synched, my creative cloud crashed.
Now, i can still start creative cloud, and i can even get to the primary menu, but 10 seconds after launching it, it crashes. What can i do?

Mail.app crashes while setting up an Exchange Account

Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

Trying to add a new node to OAS

Similar Messages

Maybe you are looking for