Trying to add a WRT610n to my home network. When I try t...

Trying to add a WRT610n to my home network. When I try to connect to the router from my XP desktop with a CAT5 cable it does not see it. Was able to connect from my Vista laptop both with a CAT 5 and wirelessly. Changed the router IP address to 192.168.2.1 as instructed by tech support. Desktop still does not see the router. Connect desktop to Westell wireless modem/router with a CAT 5 - no problem. Also connected the desk top to a regular router no problem..
Got no help from tech support - was told that it's not their problem so it must be a computer hardware problem. If it was a hardware issue with my computer then why didn't I have a problem with the other two routers?
I am sure it is a configuration problem but I can not get any support for Linksys? Any ideas?

Well you need to assign the static DNS to the pc in the range of the new lan ip 192.168.2.1 & you will be able to go online wired & wirelessly.

Similar Messages

HT204406 lately I am having trouble in iTunes Match. I'm getting a 4010 error message whenever it first tries to add new music from a cd. When I try it again, it works.

why am I getting a 4010 error message saying it is having trouble contacting iTunes?

You're not alone on this, at least.
I'm using iTunes on OS X (Mavericks), so I'm guessing it's a back-end issue.
Hope it's fixed soon.

I am trying to add a bookmark in safari ios7, but when I tap the box/arrow up button nothing happens and no options appear on screen to be able to add a bookmark. In fact the screen freezes, can smeone please help?

I am trying to add a bookmark in safari ios7, but when I tap the box with the upward arrow no options appear anywhere on screen to add a bookmark. In fact the screen freezes and I have to close safari to be able to unfreeze it. What is wrong, can anyone please help me? Thanks

please ignore this question, I added the ios7.0.2 patch and the bookmarks can now be added through the action icon. cheers

I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera l

I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks

Apple most likely has the same poor taste that Microsoft does when it come to defaults. Microsoft likes to hide things like settings, preset, folders etc from normal users think the dumb or something else. If Apple also hide things you will have to make some system setting changes that will allow Finder to do it job and find it for you.

HT4571 I have been trying to add data to my I pad and when I add it it goes to a page that says error. Is there another way to add data?

I have been trying to add data to my I pad and when I add it it goes to a page that says error. Is there another way to add data?

The installer is over 5Gb's and could take many hours to download.
Check the download status in the App Store application.

I keep trying to add songs to my wish list but when I view the list there's nothing there.

I keep trying to add songs to my wish list but when I view the list there's nothing there.

You click on an item's price to buy it - there used to be a 'buy all' button on the wish list screen, but for some reason that has been removed from the current version of iTunes, so you can only buy items individually by clicking on their prices.

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please.

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!

Grum12 wrote:
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!
Hi Grum,
If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
Jerry

I'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

i'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

Until Bob Timmons gets back to you, first decide what you would like the Express to do. I understand you want it for AirPlay remote speakers, which you can certainly do.
I am assuming that you are not using an Apple AirPort router; if that's not the case stop here and let me know.
If your existing router is not an Apple AirPort Base Station, the Express:
can "join" an existing wireless network as a client, for the sole purpose of streaming music. If that's what you want to do, do not connect it to your router with an Ethernet cable.
can "extend" an existing wired network to serve as an additional wireless access point, which can also stream music. If that's what you want to do, connect its WAN port to an available LAN port on your router using an Ethernet cable.
Then, "hard reset" the Express according to the instructions below, and configure it. The prompts should be self-explanatory. If you run into trouble, describe which of the above two configurations you decided upon, and the point at which you're getting the "unexpected problem".
To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click. Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

M trying to add a printer to my extreme network however i only get the basic airport utility screen when I click on airport utility ??? Am I going crazy

m trying to add a printer to my extreme network however i only get the basic airport utility screen when I click on airport utility ??? Am I going crazy

OS X Mountain Lion: Set up a printer to print wirelessly
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

Can't add music my iPhone from iTunes. When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load. [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

Can't add music my iPhone from iTunes.
When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
[Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
Also, just updated the phone's software today, and iTunes' software is already up to date.

Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB

HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

I am trying to set up my new iphone 4s, but when i try to log into itunes it keeps coming up with server error. What do i do?

I am trying to set up my new iphone 4s, but when i try to log into itunes it keeps coming up with server error. What do i do?
<Edited by host>

Some free advice. If your son is 8 years old, put him on your account, and set parental controls so that he cannot accidentally run up giant charges within the games.
If your son is 25 years old, get him his own AppleID and make him responsible for his own bills.
In between ... use your judgement.

I loaded Digital Editions onto a second computer at home. When I try to download a book from the library I get the following error message: E_Act_Not_Ready, License Server Communication. Any suggestions?

I loaded Digital Editions onto a second computer at home. When I try to download a book from the library I get the following error message: E_Act_Not_Ready, License Server Communication. Any suggestions?

Having exact same problem, only it's with a book I've paid for, so it hurts more . Any ideas?

I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help

I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help...

We are starting from the beginning like its a new ipod starts out asking language, country,location services,choose a network,and when we get to "setup ipod touch " there are 3 options 1..setup as new ipod, 2.restore from ipod backup 3 restore from itunes backup and when we hit setup as new ipod and click next it comes up with sign in with apple id or create a free apple id we clicked create a free apple id....then comes up with bday,1st name last name, use your current email address, get a free icloud email address or change email address and THIS is where we have problems....if we hit change email address it means that sis's stuff goes under his name and moves all her stuff to this older ipod which the brother does not want. sorry this is so long but its the only way I knew to do it.

I am really having a horrible time when trying to do our Church announcements in FCP X. When I try to take a clip from the event to the timeline my clips expanded and my timeline zoom level does not stay in the original place. Help

I am really having a horrible time when trying to do our Church announcements in FCP X. When I try to take a clip from the event to the timeline my clips expanded and my timeline zoom level does not stay in the original place it moves to the right and is max out which makes every clip that I bring to the timeline expanded.

What format etc. are the video clips and what were they shot on?
Before you do anything else, trash the preferences with this free app:-
http://www.digitalrebellion.com/prefman/

Trying to add a WRT610n to my home network. When I try t...

Similar Messages

Maybe you are looking for