Trying to add an Administration Page to my site for login...
Hey my name is Jonathan Coyle and I am trying to add an administrative page to allow our visitors that want to, to register with our site. I have researched it and have come up with some stuff on how to do it, I just want to see what kind of information I can get from y'all. So if y'all need me to post any particulars then let me know and I will...
Well it's not like that Gramps, I am on that site, and it is very helpful. It is great, however I am having some issues with downloading the AMP stack(Apache, MySQL, and PHP). For some reason I am not able to download it like I need to. It's totally not like I'm not using your suggestion, cause I am very much. But personally I like to have more than 1 resource if I can to be able to learn as much as possible. So no disrespect bro, I am very thankful for yours, and everyone elses suggestions. I simply meant to say, if I didn't say it, that all suggested resources are welcome, cause I will utilize all that yall throw at me... No pun intended...
Thanks again, and I apologize for my mis-communication...
GOD BLESS yall.....
Similar Messages
-
To avoid displaying "Page has expired" dialog for Login page
Hi,
In my application, if the session get timed out, its displaying "page has expired" dialog for login page also. I dont want to display "Page has Expired" dialog for Login page. I am using Jdev11.1.2.1. Please help....This will help.
How to disable "Page Expired " dialog -
Trying to add a last page in Smartforms
Hi,
On the smartform I have a FIRST Page & NEXT page. The main window is set to different sizes on each page. If the invoice is one page long then the footer is triggered. If the invoice flows over to the next page the footer is only printed on the last page and the main window on the first page is utilized to the bottom of the page. My footer is set up as a secondary window that is triggered after the MAIN window.
I now need to add an appendix page that needs to be triggered as the LAST page, but the issue I'm running into is that I can't get the footer to print on the previous page any more. The footer needs to be on the previous page and a completely different set of data will print on the LAST page.
I tried using a command in the MAIN window but I really need the command to be triggered after the footer details rather than after 'the main window' in the Additional Event on the Conditions tab.
How can I get a LAST page to print and keep the footer on the previous page?
Thanks
Lisadear all sap champs i want to get two separate
pages. is this a requied condition that data should be
overflowed in 1st page.
then only i can get 2nd page.
pls all help me ....
vivek -
How do I add a web page to top sites in Yosemite?
How do I add and lock in a web page to top sites in Yosemite?
Took me some time to figure it out, but here's how to add.
Go to the page you want to add.
when you hover the mouse curso over the address bar, a circle with a "sign" will appear ...
Click on it and keep the mouse button pressed.
A list should appear, just select "Top Sites" ...
That's it ! -
Trying to add apple protection plan but lost receipt for the additional proof what can i do?
I bought my Mac Book pro 13" a year ago but i moved to Japan and lost my receipt during the moving process now am trying to add an extra 2 year protection plan to my Mac but Apple requiers the receipt what can i do ??
If you enter your MBP serial number here, you will be able to determine if your MBP is still under warranty:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
If it is, I would try to register the MBP for AppleCare here:
http://www.apple.com/support/applecare/
Ciao. -
I am trying to add a VPN and need to enter password for credential storage. What is that? I never set a password for credential storage. Where do I get it?
I've been trying to set up a VPN from my LG G2 and it also asks for the password for credential storage. However, entering the password associated with the VPN, does nothing. What are they asking for?
-
Very confused about publishing the Muse site. It sound like I won't be able to edit a lot of it once it is published. I need to be able to add and delete pages and edit the content on existing pages over time. It is saying that the temporary version of the site will delete after 30 days. Am I misunderstanding?
It sounds like you didn't upload the css files folder that Muse generates. There is also scripts file, assets file/images file that Muse generates
-
Trying to add a php page to my existing template
the title might not be what i have an issue with but its the best i could think of lol
basically i have a site layout setup already
now my site is at http://fgtestforum.info/daz
(ive been told about ap divs already)
ok in my menu under home you will see a my home link
if you click that it will load the my home page but..... my issues are as follows
1 . im struggling to get the rest of the content included in the file when the page loads
2 . my css doesnt display the box correctly unless is use the html "link" command for the css file in my page (right click - view source and youll see)
i know i dont need to use this code to get the css to work but atm till i can figure it our its the only way to display it..
3 . basically this page will be exactly the same as the index page apart from the fact the pink content box on index turns into a my home box and extends to the edge of my doc (removing the 4 little boxes from index)
basically where am i going wrong? im still new to php so any help would be appreciated
cheers in advancenever mind i made a really simple but silly mistake
i had the myhome file in my includes folder and was trying to include php files from it in my doc.
i moved my myhome page to my root then added the include to the files and they showed up
this can be deleted
sry to waste a topic -
Suppose I have an image called " myLoading " loaded with visible=false on canvasPage. En my code is something on the likes of
myLoading.visible=true;
code
myLoading.visible=false.
But this is not working. Also, I am aware that the section between /** **/ takes long enough so that we have time to show the image
Any idea why this is not working?not sure if thats the right way to do a loading page...im guessing you are trying to load modules and in between the loading want to display something to the user?
if so, you should look at using states, rather than how you are doing it right now.
basically check the load progress of the module and while its loading, go to the loading state and once done, take the loading state away. -
I am creating a book and had 27 pages done manually off of an album , I wanted to add more pages but when I try to add a page nothing happens.
Select the book in the left hand sourcd pane and type Command +D (duplicate). Then do as Keith suggested to turn it into two separate books, i.e one with 1-50 pages and one with 1-57 to get all of the pages included in two about equal books.
The will have to be ordered separately with separate shipping charges.
OT -
Any help?
That said, it sounds like a translation of a message which might still apply.
What is the original text of the message, exactly, in its original language? -
One of the pages can be seen here.
Rob Duverger | Coffee Table Books
Thanks,
RobHi Rob,
I had to put my adblock addon on pause , and your ads appears correctly, I am adding a screenshot here
Have you already tried that? -
Trying to add Flash Intro to my HTML site
Hi everybody.
I have an HTML site that I would like to add a Flash Intro
to. I would like the Flash intro page to play (about 30 seconds)
then change to the first page of my HTML site. I have searched
through several books, Lynda.com, and google, but can't come up
with a good solution.
Would someone be kind enough to help?
Thanks in advance.
BrianBefore reading all this, make sure you download my example
files at
http://www.shan-dysigns.com/flash/flashIntro.zip
That link is further down in my reply, but you may miss it.
Since you want people to see your flash intro before your
html page, you will have to rename your existing html page to
something like homepage.html. When people go to your domain name,
file names such as index, default (I think there might be a few
others) will be automatically loaded first. Because of this, your
flash intro (once placed into an html page) will have to be named
index.html.
After creating your flash intro, export it to a swf file. Go
into DW and create a new html page (you need a container for your
flash intro). On the menu bar of DW, click Insert, then Media, then
Flash. You may want to create a table or a div tag before hand in
order to center the flash file (then you would just insert the
flash file into that table or div tag).
if you download my example stuff
here,
you will see a flash document, swf file, the index.html page which
holds the flash intro swf file, a hopepage.html file, and a folder
DW automatically creates when you insert Flash content. Download
the zip file and save it in a temp folder somewhere. Go to Windows
Explorer (assuming you are on a PC), and double click the
index.html page (I don't know if your browser will ask if it's ok
to run scripts, but it's just the script from DW allowing the
flash). You should see the 10 seconds of the flash intro, then you
will be redirected to the homepage.html file when the intro is
finished. If you look at the flash document, on the last layer
where I have the script, there is an absolute path (currently
commented out), and a relative path. Using the relative path will
allow you to test this without having to upload to a server. In
order to test all this on a server, you will need to upload all the
files and the folder to a server (you may want to create a test
folder on the server to place these files in). Make sure you change
the flash document's code to the absolute path and comment out the
relative one, and make sure to change the domain name to yours,
export the flash file and upload the new swf along with the other
files and folder. Then go to yourDomainName.com/test, and you
should see everything. I don't know how else to explain any of
this... -
Trying to Add New Entity/Child/Location in FDM for HFM 9.3.1
How should I create a child or in this case a retail location for a Parent in FDM. When I go to Locations I can see all the parents and siblings but I can not see any of the children/retail locations. How do I add them. This client does not have the Dimension Library in Workspace. The client is working in HFM 9.3.1
- Log into FDM web
- Click on MetaData
- Click on Locations
- Locate the Parent Location
- right click and select Add Child -
Help! Keynote - Trying to add a black outline to a font for readability
I use a lot of pictures for backgrounds. Often the fonts get very hard to read over the varied colors of the background. Is there a way to outline a font with a black outline so that it is easier to read over picture backgrounds??
Welcome to the Forum.
I have tried to do this with minimal success using the Shadow effect with a very small offset and blur. sometimes it will be OK, but not in all situations - especially when the text is over a complex photograph or one with colors similar to the text itself.
What I have found works better is to use the Shapes menu to create a rectangle that is exactly the same size as the text block, place it behind the text but in front of the picture, and then reduce the Opacity of the rectangle until it is visible just enough to provide definition to the text but not be seen as a "mask." A black rectangle under white or yellow text seems to work best, but you can experiment with other colors to find a combination that is most appropriate for your slides.
Good luck
Maybe you are looking for
-
I will type in google let say tree the search will click on to one of the searches and instead of tree web page showing up a ad page will come up this happens with very thing can you help.
-
Backing up Hyper-V Guests on Windows 8/8.1 Hosts?
Hi, is there any way to get DPM to backup Hyper-V Guests hosted on Win8 (or 8.1) machines? Requirement comes from developer workstations that have local VMs for sharepoint development. Unfortunately, DPM doesn't seem to "see" the HV Component when t
-
Blank images using Web Journal
I've uploaded a Web Journal (around 4 hours!) and 4 of the images are blank/black (both the thumbnail and the main image). Any ideas on the best way of fixing this problem. I'm loathed to just republish as I'm sure the same images will appear blank.
-
Problem in FM - REUSE_ALV_GRID_DISPLAY ?
Hi All, I am using REUSE_ALV_GRID_DISPLAY to display a ALV grid. I need to DISABLE the following buttons on the Grid Toolbar; 1. Sort Ascending 2. Sort Descending 3. Filter 4. Total Please give me a complete example. Thanks, Kishan
-
How come in Pages, i cannot drag and drop images?
how come in Pages, i cannot drag and drop images?