Trying to add apple protection plan but lost receipt for the additional proof what can i do?
I bought my Mac Book pro 13" a year ago but i moved to Japan and lost my receipt during the moving process now am trying to add an extra 2 year protection plan to my Mac but Apple requiers the receipt what can i do ??
If you enter your MBP serial number here, you will be able to determine if your MBP is still under warranty:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
If it is, I would try to register the MBP for AppleCare here:
http://www.apple.com/support/applecare/
Ciao.
Similar Messages
-
I just got a new iPhone 4S and tried to restore but it didn't finished downloading all the apps, tried to reset and restore again, but it wouldn't start over. What can I do?
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware. -
I begin to download mountain lion update and it fail. Then I tried again and icon shows "waiting" but it never begin to download. What can I do?
RainbowGarner wrote:
By install i presume you mean add it to the bottom of the machine ?
Yes, and it's rather easy to do too.
Your machine has two slots. These are the specs for a 2008 iMac (if your machine is different then check with Crucial.com and they will match the correct RAM for your machine)
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-6400 (800MHz) DDR2 SO-DIMM
So all you need to do is visit Crucial.com or OtherWorld Computing to order it, and OtherWorld Computing has install videos.
Here is one on YouTube. Easy pleasy.
Just make sure to discharge any static electricity and not touch the contacts, just the plastic edges.
https://www.youtube.com/watch?v=Fb_B3K1Za5Y -
Everytime I try to open firefox, it just doesnt open up. no matter how many times I click it. I tried uninstalling it and reinstalling it, but it continues with the same problem. what should I do?
You can disable autoupdate by following these steps:
Go to main menu > Tools > Options > click on Advanced tab > click on Update tab and then click on the round radio button that says ''Never check for updates (not recommended: security risk)''
Refer the attached screenshot -
i just bought a macbook pro and the mountain lion free update applied correctly but the internet went down and now the download won't appear/ continue, and when i open the app store it requests me to pay for the update? what can i do?
Welcome to Apple Communities
http://www.apple.com/support/mac/app-store/contact -
I had to buy a new keyboard but F10, F11 & F12 don't work for the volume. What can I do to activate it?
Hello,
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php -
I dit an update for itunes but now I got the error R6034 what can I do
I dit an update for itunes but now I got the error R6034 what can I do I dont want to lose my libray :-(
See post by Kappy
Error 3072 -
I bought some tokens to help on 'Words with friends' but they didn't download. I have the receipt for the purchase. How can I collect the tokens?
You will never receive a reply from Physios because they have discontinued the game and all support for it.
-
My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, after seeing the low battery image, i tried to charge the iphone. After charging for 30 minutes, it still wont turn on but keeps on blinking the apple logo. It has been blinking for 2 days. Then I tried to connect to itunes, but itunes cant recognize the device. What should I do?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743 -
i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!
Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.
-
Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. Does anyone have any ideas what can be done?
follow the steps in this article first
=http://support.apple.com/kb/HT1451
after that restore your ipod and resync it
hope this helps:) -
Buy apple care plan help fix everything for the imac osx lion 10.7.5
Hi apple pplz.. I have a question to ask you. If i buy renewal my apple care plan for imac osx lion 10.7.5. Sometime in the future, if my computer is broken down or having issue on the computer. What the apple care plan coverage all the internal part if anything goes wrong it. Cause i don't want to pay for a huge money just for fixing the parts if cost more $1000, worth more than i bought it brand new??
Apple is not here, you're talking to other users.
If you buy the AppleCare warranty, it will cover any defects in the computer, just like the included one-year warranty. Note that you must purchase AppleCare within one year of the purchase of the Mac. -
Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?
Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
The address book on my iPad2 will not open although it did before I downloaded iCloud. Following the manual instructions, I reset the iPad to network settings but the address book will still not open. I would be grateful for any advice on what to do next.
Have you an iCloud email address? Try deleting it temporarily.
-
Any help?
That said, it sounds like a translation of a message which might still apply.
What is the original text of the message, exactly, in its original language?
Maybe you are looking for
-
Develop settings are not carring back to the Library
I downloaded LR4 the first morning, and it has been pretty impressive. Until last night. I did the editing I wanted to do in the develop module, and when I went back to the Library to export, not everything came along. Most notible was the noise redu
-
Itunes won't display cover art correctly
When I view my music in the album list, the cover art for songs will show up very sporadically, despite displaying fine in the grid and cover flow formats. They also show up when I select "Get Info" as part of the information and in the cover section
-
I am suddenly having problems importing photos with Lightroom. I get an error message "Some import operations were not performed. The following files were not imported because they could not be read." Doesn't matter what camera I am using. I can open
-
Sccm 2007 need to pull report of advertisements whose success rate is less then 80%
sccm 2007 need to pull report of all advertisements whose success rate is less then 80%
-
Problems while enabling Failover with Parallel Concurrent Processing (PCP)
Hi, I followed the following Note , to configure PCP : From Note 743716.1 - How to Setup and Test Failover of PCP on Non-RAC Environments Concurrent Managers configured : ERPCON1 ERPCON2 On those 2 Nodes : - APPLDCP is 'ON' - s_cp_reviver is 'enabled