Trying to add audio frezzes captivate 7

captivate 7 locks up when i try to add audio to an object

QuickTime Pro can be used to add an image (or many images) to an audio track.
Takes just a few seconds to make them.

Similar Messages

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer. This happens with mp3 and mp4 and just wav files. Some audio are accepted, most are not. I get that codec is not installed error message, too.

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

What should I do if I am trying to add audio from iTunes onto a Powerpoint presentation, but it keeps saying that I must first open up iTunes before I can access the music?

What sould I do if I am trying to add audio from iTunes onto a powerpoint presentation, but when I click on the Audio >> Audio Browser icon a little side bar pos up which says you must first open iTunes before you can access the music here (different words) even though I already have iTunes open on my computer.

Sandra Powers 14\' wrote:
which says you must first open iTunes before you can access the music here (different words)
Perhaps you would tell us what words it does show...

Imovie application quits when trying to add audio

when trying to drag audio into imovie, application automatically quits. If anyone can help, it's greatly appreciated.

I'm running out of ideas but I assume the music plays in iTunes and your iTunes is the iLife5 rather than earlier. When you click on audio at the clips pane (or whatever it is called) I presume you can access the full iTunes library. If you cannot, you have an iLife problem. Then does the crash come from all your tunes.
Before all this you could run Mac Sweeper which you will find (free download) on http://mac.softpedia.com/get/System-Utilities/Mac-Sweeper.shtml
it has good help messages.
1) Carry out all the optimize options the daily weekly and monthly
2) Repair permissions
3) Update prebindings
4) under
b clean,
empty system caches and log files.
Some people find its authorize dialogue misleading it is just asking you to enter the system password to allow it to perform the scripts.

Trying to add audio with an image..

I want to have an audio bar with an image attached to it. I built a page with the image seperate from the audio image. It looks just the way I want it (with the audio bar below the image) but when I publish the page it comes out with the audio placeholder box on the top so that it blocks out most of the image. Cant seem to add the image into the audio file placeholder, or get it to publish the layers the way I build them. Been trying to solve this problem forever! Please help, even if the answer is ridiculous and obvious.

QuickTime Pro can be used to add an image (or many images) to an audio track.
Takes just a few seconds to make them.

Trying to add audio player progress bar

Hi
I'd like to add a progress bar to my flash audio player.
Right now you press a button, a certain sound loads and then plays.
Here's part of the code:
function playSong(e:Event):void{
    if (my_channel) {
        my_channel.stop();
    var myURL = ("mysong.mp3");
    my_sound = new Sound();
    my_sound.load(new URLRequest(myURL));
    my_channel = my_sound.play();
In order to build a progress bar I wanted to find out the length or duration of the sound but I keep getting error messages or 0s in return
trace (my_sound.duration);
tells me that duration is an undefined property
trace (my_sound.length);
trace (my_sound.position);
trace (my_sound.bytesTotal);
trace (my_sound.bytesLoaded);
all give me a 0 in return
Any idea why? Why can't I access the properties of my Sound?
I'd also be very thankful for any other suggestions on how to add a progress bar. I searched a number of websites, but most samples are AS2 code...
Thanks
Julie

Duh! Once again I thought my comuter is faster than it actually is ;-)
Thanks :-)

Trying to add audio narrative to a Slideshow via vocal track on Garageband-won't take. How can I do this for illiterate friend?

I have set up a Slideshow on iDVD with the intention of adding a narrative and burning a dvd, so a friend of mine who can neither read nor write will be able to watch the pictures while listening to the narrative. I have produced a narrative by using the Male Vocal track on Garageband, but when I try to drop the result into the Audio box at the base of the Slideshow Edit Window, it won't take. I know that only certain types of audio will work, but I thought Garageband would do the job.
If I can't do it that way, how can I make a suitable narrative without putting it separately onto a cassette tape?
Using an iBook G4, running OSX 10.4.11– the latest system I can run.

Save the Garageband track as an aiff or mp3 file and use that.
OT

Integrating edge animations into Premiere to add audio

I want to add and synch an audio track to an edge animation. Is there a known workflow for getting edge animations into video (mp4) format so that I can then add audio?

Hi Jim, there is currently no built-in way to convert the html/javascript output of Edge Animate, to mp4 video.
What is your end goal? Are you trying to add audio to an Edge animation, which will live as html on the web? Or is your end goal a video piece?
If your end goal is a video piece, you could use screen capture software to record your Edge animation in-browser, then import that video to Premiere.
Depending on your use-case, it might make more sense to use a much more advanced, purpose-built animation application like After Effects as your animation tool, rather than Edge Animate.

Captivate 5 freezing issue when trying to add closed captions to video

Hi There --
I'm trying to add closed captions to a video (.f4v) I inserted as "Slide Video" on a slide in an Adobe Captivate 5 presentation. I click on the video to select it, go to the properties panel, select "edit video timing" and then click on the closed captions panel to try and add captions and then Captivate completely freezes and locks up so not only can I not add captions to the video, but I have to use Windows task manager to shut it down.
I've seen this process demonstrated in a Lynda.com tutorial, and the instructor didn't seem to have this issue with Captivate 5.
Any thoughts? Have other users found a work around at all? I mean, I know I could strip the audio from the video, and then attach it to the slide and do closed captions that way, but it would be way easier (and make a lot more sense) to add it directly to the video, especially since that's what you are supposed to be able to do.
I'm using Captivate 5 on Windows 7. I also have Captivate 5 on a personal Macintosh and haven't tried yet to see if the issue occurs on that platform as well. Has anyone else run into this issue? Sorry for the length -- this is my first forum posting, so I'm trying to provide as much info as possible.

Hi Dan,
Welcome to Adobe Captivate Forums.
You can try to add the closed captions to Video after deleting the preferences.
Follow these steps to delete the preferences
1. Close Captivate if its launched already
2. Navigate to C:\Users\<userName>\AppData\Local\Adobe
3. Locate a folder named "Captivate 5"
4. Delete the folder
5. Now Launch Captivate and try your workflow
Let us know if this solved the issue .
-Ashwin Bharghav B
Adobe Captivate Team

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

In GarageBand 10.0.2 you can no longer add all kinds of effects freely; this GarageBand '11 feature has been discontinued. Pick one of the predefined patches that already has the effects you want.
However, you can add effects from the predefined audio units.
You'll see the predefined effects on the track, when you open the Smart Controls. To add audio units, click the button and enlarge the the smart controls pane by dragging the dividing line to the Track Area upwards.

How to extract the audio of a zip file? if it helps I'm trying to add this album zip to my library

how to extract the audio of a zip file? if it helps I'm trying to add this album zip to my library

Let's say you have a zipped audio collection (audio.zip) containing mp3 files. And you are at a Terminal prompt.
List the files in the zip archive
unzip -l audio.zip (that is ell)
Extract all mp3 audio files into a new home directory folder called mymusic
unzip -d ~/mymusic audio.zip \*.mp3
Variations of the above will depend the zip contents, and internal structure. If the zipped audio collection was gzipped, or someone used rar on it, then the extraction process will be different.

Can you add audio tracks as selectable menu items on a dvd? I shot a wedding where the church had its own set up to record audio. I'm trying to make those songs performed by the artists available for viewers of the dvd to select for listening.?

I'm trying to make audio (MP3) tracks available for viewers of this Wedding dvd to select for listening. Is this possible in iDVD?

You will need to create a slide show for each of those songs with a minimum of 1 photo per slideshow and add the song to the slideshow audio bin. Set the audio to Fit to Music.
In your top/main menu add a submenu for the list of songs.
Add a slideshow for each song with the "+" button at the bottom:
Select the link in the menu and rename it for the song used in the slideshow. You can create a slide image for each song with the song name, composer, singer, etc. on the image to be used for the slideshow An image editor or Pages can be used for that and then convert to a jpeg file for use in iDVD.
The song/playlist menu could look like this depending on the theme you choose:
OT

I am trying to add a full screen mode button for non scalable pubished video in captivate 7

I am trying to add a full screen mode button for non scalable pubished video in captivate 7. For captivate 6 I used a widget from CPguru but that is not compatible with captivate 7.

Hello,
We have tried the Fullscreen widget from CPguru.
It seems to be working fine at our end.
Could you please try using the widget in a new project.
It could be specific to the project you have created. If possible, share the cptx file with us for better investigation.
Share the file (at https://workspaces.acrobat.com) and send it to [email protected]
Thanks,
Mayank

Captivate keeps freezing when I try to add audio

Hi -
This happens sporadically, but sometimes (e.g. right now) when I try to add audio to my Captivate 7 project it just hangs and is non-responsive.
Is this a known issue? Need some help because I'm in a time crunch here.
Thanks,
Jared

Have you by any chance been using a multiple monitor setup recently?
If so, then your non-responsive Captivate might just be that a modal dialog is open but you cannot see it on your current screen setup.
When Captivate becomes unresponsive again, try hitting the ESCAPE key on your keyboard. If that returns control to you, then the multi-screen issue is your likely culprit. You need to recreate the original screen setup and when you find the elusive modal dialogs (there may be more than one) drag them back over the main screen again.

PSE 9 Organizer error codec trying to add an Elements audio file to slide show

I am using PSE 9 to build a slide show. When I add audio, I can use mp3's from my music library in the slide show without any issues ...
but I am getting the following error when I try to add an Elements audio file (example " A _Taste_Of_Sicily.mp3)
This is the Organizer error message:
"Unable to add the audio file (C:\ProgramData\Adobe\ElementsOrganizer\8.0\Music\A_Taste_Of_Sicily.mp3).
The selected file cannot be played because your system does not have the required compresser/decompresser(codec) installed."
I had PSE 8 and upgraded to PSE 9 - I noticed the error file detail shows 8.0 - Is this my problem - maybe an incomplete upgrade ? (I've made several slideshows mixing photos and music, on an older computer using PSE 8 and never ran into this issue.)
Below is my system info in case that helps:
OS=Windows 7 Home Premium 64-bit on an HP Pavillion dv7
Intel(R) Core(TM) i5-430M Dual Core processor (2.26GHz, 3MB L2 Cache) with Turbo Boost up to 2.53GHz
8GB DDR3 System Memory (2 Dimm)
500GB 7200RPM SATA Hard Drive with HP ProtectSmart Hard Drive Protection
512MB ATI Mobility Radeon(TM) HD 5470 switchable graphics
IDT High Definition Audio CODEC
Thanks for any help !

beccarie1 wrote:
This is the Organizer error message:
"Unable to add the audio file (C:\ProgramData\Adobe\ElementsOrganizer\8.0\Music\A_Taste_Of_Sicily.m p3).
The selected file cannot be played because your system does not have the required compresser/decompresser(codec) installed."
Does that file extension really have a space in it? If so, remove the space.
Ken

Trying to add audio frezzes captivate 7

Similar Messages

Maybe you are looking for