Trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple

trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple (although it says that the software is available from Apple)

Rfh723-
You are technically way ahead of me, so I can't argue with what you did.
How about an even simpler WiFi network consisting of only the AirPort connected by an Ethernet cable to the printer?  If the iPad still can't find the printer when connected to this network, then something is broken!
(Also try a different Ethernet cable.)
Fred

Similar Messages

  • I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, i get message "The Configuration data for this product is Corrupt".

    I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI"  I
    am so disgusted,please help!!!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Can't seem to print via Airport Express & Xerox Printer

    For some reason I cannot make this happen. I have an Airport Express plugged in. The USB cable is linked between my Xerox 6280n and the Express.
    What now?
    I hit print, then click the Xerox under nearby printers, it says there is new software from Apple, so I click "download and install" then it says the software is "currently unavailable". I can print directly from the computer no problem, I don't know what I'm doing wrong.
    I download the firmware update from Xerox and it asks me to "set the IP address for printer"
    I printed out the test copy and it listed the IP as 0.0.0.0 that has to be wrong, I have no idea at this point.

    Welcome to the discussion area!
    Sometimes repeated resets will temporarily lock up the AirPort Express (AX). Try powering it off for 30-45 minutes or so. Then hold in the reset button +and keep holding it in+ as you plug the AX back in to power. Release the reset button after 8-10 seconds. This is known as a Factory Default Reset.
    Try connecting the ethernet cable again between your computer and the AX to help AirPort Utility "see" the AX so that you can reconfigure it.
    If you try the Factory Default Reset a few more times and AirPort Utility still cannot "see" the AX, I'm afraid that this is an indication that something has failed within the AX and it will need to be replaced.

  • Trying to get my Viera TX-P42S30B hooked up to me home network via Airport express with no luck.

    Trying to get my Viera TX-P42S30B hooked up to my home network via Airport express with no luck.
    Have tried both wired (network cable) and wireless to no avail, can't find much info online, any help appreciated !
    Airport utility 5.5.3
    Airport Extreme 802.11n
    Airport Express 802.11g

    The problem is that the AirPort Express (AX) is creating a subnet.
    To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address).

  • After iTunes update, can't connect to remote speakers via Airport Express

    I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
    My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
    Anyone else have/had this problem? Any ideas?

    I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
    I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
    Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

  • Can't find certain servers connecting via Airport Express

    For the last couple of weeks I've been intermittantly unable to access certain websites (time.com / nytimes.com) when connected to the Net via Airport Express. Sometimes these pages come up, more often then not, they don't. I have no problem receiving email or accessing other sites. Also, I always loose my connection when streaming news stories from NPR. However, I have no such problem when connected directly via ethernet. Thus, it seems to be some glitch with airport express. Does this make sense to anyone?

    Gerard Van Schip wrote:
    I have 3 printers connected to the network via Ethernet and as long as I'm connected directly to the network I can print but as soon as I connect to one of the 4 Airport Express units I have I can no longer print.
    You don't describe what happens when you try to print.
    Does the IP address your computer is granted in both configurations match in the first three elements (such as 10.0.1.5 and 10.0.1.7)? If not, then your AirPort Express unit is creating a new "subnet", which can cause problems when your computer tries to communicate with the printer.
    Try adding the printer in the "Print & Fax" panel of System Preferences by choosing the "IP" option and entering the IP address of the printer.

  • Connecting computers via Airport Express

    I have a problem that I've been trying to solve, but so far nothing has worked.
    I have three Macs, 2 G4 PowerBooks and an iMac (Core 2 Duo) which are all connected via an Airport Express. All of the computers can access the net and my printer just fine. The iMac can connect to both of the G4s, and one of the G4s can connect to both the iMac and the other G4. The problem is that one of the G4s can only connect to the other G4, not the iMac. It's as though the iMac does not exist for it's purposes. Yet I can connect to that G4 from the iMac, just not the other way around.
    Any clues as to a fix for this would be greatly appreciated.

    That is what you want to select.
    You jumped into the middle of this thread. What
    problem do you have?
    More to the point - what is YOUR problem...I think your response was a little rude...
    One who has common sense can see what issue I am having simply by looking at the subject of the original post - and reading my entire post.
    For your benefit, the subject is: Problems Connecting Two Computers to Cable Modem via AirPort Express.
    If you read my post again, you will see that after following the advice given by Rj, I am still having problems. I will not re-post my question. Simply restating things in this post has been a waste of time.

  • Extend wireless network from Uverse/Motorola 1ZVDC via Airport express

    After spending 2+ hours trying to extend son's network via A Express, can this be done straight from his uVerse Motorola 1ZVDC modem?  I can get the express to show up, but will not work/extend network, and doesn't show up in wireless menu; only in airport utility :-(
    Now I saw an old post which says express cannot expand network from non-apple modem.  Is this correct? I don't think he wants to pay for Extreme + express.  I am certain that, at my other residence, I am using an express directly paired to my uVerse.  Here, main residence, I have 3 paired with Extreme. 
    He had bought a cheap extender which has to be plugged into USB on computer (wouldn't this be the modem?).  I was positive the express would do the job.
    His setup: OS X.6.8
    Airport: 5.6.1
    uVerse Motorola: 1ZVDC
    Apple Express:one below
    What if I plug the express directly into the modem?  Of course, probably won't extend network, which is my objective.
    If I give him my old extreme, what are advantages to new one?
    TY for your help.
    Ruth

    You cannot use extend to other brands.. it is apple proprietary method of repeater.
    What if I plug the express directly into the modem?  Of course, probably won't extend network, which is my objective.
    You can always plug in by ethernet and setup the express to create a wireless network with the same name and same credentials as the existing wireless.. this is called roaming network and is far superior to extend.
    If ethernet does not allow you to place the unit in the right place.. you can try EOP adapters. (homeplug in the US).
    If I give him my old extreme, what are advantages to new one?
    You can extend wireless by plugging the extreme into the main modem.. setup wireless to create a wireless network.. the Express can extend an apple wireless network.
    However please do understand the restrictions.. extend will halve the speed at best.. at worst it will be too slow to be usable. And the range can still be poor.. apple do not make wireless powerhouses.. they are average at best.
    He had bought a cheap extender which has to be plugged into USB on computer (wouldn't this be the modem?).  I was positive the express would do the job.
    If it is a universal extender it should work but needs to be located where the signal is still good.. USB is probably just for power.
    If the computer cannot pick up wireless signal then the extender cannot work either.

  • HT3669 Failed printer setup, bonjour via airport express on 10.8.3, unable to download drivers?

    Trying to install a Samsung SCX-4500 printer over bonjour via airport express. My Mountain Lion machine sees the printer and I've manually installed the latest Samsung drivers, it says it can't find the software on Apple's servers. I just downloaded the latest drivers from Samsung directly, it did not resolve the problem.
    I am unable to select printer drivers manually for the 4500; even if I manually select the 4500W drivers it still attempts to download software (unsuccessfully). It works perfectly on 2 Lion machines and a PC, unsure what the deal is.
    I'm having trouble even getting the post message' button to work now, it isn't my day...

    Link to Apple supplied print drivers:
    Samsung Print Drivers
    You can also try resetting the print system:
    Reset Printing System

  • Speaker volume via Airport Express

    My iTunes volume plus the volume on my speakers are both set to the maximum but the music volume is very low when I play iTunes through my speakers via Airport Express - much lower than if I plug my iPhone directly into my speakers
    Any tips on how to fix this would be much appreciated
    Thanks!

    have you tried to power cycle your gear ?
    shut everything down for 10 minutes. then, in intervals of 5 minutes, turn the modem back on, followed by the main router, the express next, and you computer last.
    does the problem persist ?

  • Printer Spooling via Airport Express...

    My G4 is connected via Airport Express to a printer. It has worked fine, in the past, but now when trying to print, it appears to connect but then a message reads, "spooling" and hangs without ever printing. What should I do to correct this, please?

    Have you tried posting this in the "Airport Express" Category of the Forum?
    If not, I'd suggest that as you may get more help there.
    http://discussions.apple.com/forum.jspa?forumID=1011

  • Epson Aculaser CX11NF printing via Airport Express

    Well today has been an interesting day...
    Connected printer to airport express usb port - had problems printing via this in the past but since I'd moved the printer so I could plug it into the usb port on a computer and then share it that way I thought I'd give it another go.
    Macbook 10.5.2 prints perfectly first time
    Powerbook 10.4.11 can see it and connect but won't print
    Toshiba XP laptop) can't see it
    Check out the net, try out the info I find and hey presto! Toshiba XP laptop sees and prints perfectly
    Share printer via Markbook and Markintosh and Powerbook prints fine but still won't print directly via airport express.
    Feels wrong that an xp book can print via an apple airport express easier than an apple laptop...
    Anyone have any thoughts?

    Hi,
    Thanks for all your replies. I tried repairs pewrmissions in disk utility again and got slightly excited when printer utility automatically selected a generic post script driver but my printer just printed jibberish.
    I've just run repair permission in pinter setup repair and this is my log:
    The file /System/Library/StartupItems/PrintingServices/PrintingServices is missing!
    The file /private/etc/cups/classes.conf is missing. This file is deleted when using the Reset Printing System option.
    The file /private/etc/cups/ppds.dat is missing. This file is deleted when using the Reset Printing System option.
    The permissions for the file /usr/libexec/cups/filter/rastertodymo are incorrect!
    They are lrwxr-xr-x, but should be -rwxr-xr-x
    Repaired.
    Recreating symbolic links...
    Done.
    Verification complete.
    2075 files examined. 1 problem was found and repaired. It is recommended that you verify the permissions again to make sure the values are correct.
    3 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
    Does it mean anything to anyone?

  • Trouble printing to Epson Workforce 435 via airport express network

    We have an Epson Workforce 435 printer that connects wirelessly to our home network via Airport Express.  After we switched to AT&T, we could no longer print from our Windows 7 PC connected to the network via Airport as well.  Our Macbook air works just fine.  The printer's network status sheet says it is connected, but it's like our computer can't find it on the network.  Can't ping the printer's IP address either. 

    Okay, I have checked the settings on the AX - it is set up to be 802.11b/g compatible, so that doesn't appear to be the problem.
    I had a friend come over with her macbook - she was able to detect the wireless network, but wasn't able to connect to it, even when I gave her the password. Does this help diagnose the problem?
    Here is additional information about how the AX is currently configured:
    In the Airport tab in AirPort Utility:
    Wireless Mode: Create a wireless network
    Radio Mode: 802.11b (802.11b/g compatible)
    Channel: 1
    Wireless security: WEP
    MAC Address Access Control: Not Enabled
    In the Internet tab in Airport Utility:
    Connect using: Ethernet
    Configure IPv4: Using DHCP
    Ethernet WAN port: Automatic
    Connection sharing: Off (Bridge mode)
    I have tried turning wireless security off, but that didn't help the problem. I have also tried turning MAC Address Access Control to Timed Access, inputted the MAC address of the printer, and gave it permission to access the network all day, everyday, but this didn't work either. I have looked at changing the connection sharing settings, but I don't really understand what I'm doing here, so I am reluctant to mess with things much. This seems like the most promising potential solution?
    Thanks!

  • HP printer not printing via Airport Express

    I have a HP DeskJet D2330 printer that I am trying to use via Airport Express. The issue is that while the printer is detected in the Airport Utility, and is detected in System Preferences as a Bonjour printer, I can't print to it. Documents sent to the printer appear in the queue and then disappear but no pages come out of the printer.

    Hi - similar problem. Mine talked a little (test page would print about ~1 inch then grind to halt). No luck with escalated apple network tech. Problem (apple sez) is with HP. HP is quiet but has list of printers "likely" to work with Airport Extreme , but dated (indicates rendezvous with extreme vice bonjour). FYI, my printer works fine when USB direct to mac. Also Works fine from Mac or PC as ethernet-connected printer on home network (with Linksys/N Giga router) as network printer (also sets up as "bonjour" printer for what that is worth). Also problem exists with imac connected to Airport extreme via wireless or wired. So...problem seems to be pretty specific to talking via airport extreme USB. Havent tried to use ethernet yet, but need the slot for other equip.
    Anyone else having any luck?
    Also anyone have proven good printer hookup? I need photo quality printer.
    mpw

  • G5 & PC NOT STAYING CONNECTED VIA AIRPORT EXPRESS!

    I've got a G5 and a PC - Hoped that Airport Express would allow both to access internet (via cable modem).
    The connection drops after a little while. Everything says its working but obviously it's not.
    ANY HELP??!!!
    Thx!

    reinis wrote:
    I have white Macbook (802.11g capable) and Airport Express (802.11g capable).
    I have a LAN internet connection, which is pretty fast. When I connect the cable to my ethernet and try to download something (for instance, speedtest.net) then the download speed is 33Mbit/sec, and upload is 20Mbit/sec.
    I also have an Airport Express router - the 802.11g to be specific. So in the Airport Utility, under Wireless I selected "802.11g ONLY" and selected 24Mbit/sec Multicast rate.
    When I tried to download something when conected to my Airport Express router - what actually happened, is that my computer is 2 m away from the Airport Express and the max download speed approximately should be ~24 Mbit/sec, but it turns out that the down speed is ONLY 14 Mbit/sec and the upload speed is 11 Mbit/sec.
    So it means, that the Airport Express actually cannot deliver the 24 Mbit/speed.
    I am actually pretty dissapointed, because I was kind of okay with the fact that I will loose those ~10 Mbit/sec from my actual internet sped when connected via Airport express, but I did not expect that it would be halved.
    Any solutions?
    According to one source, the maximum throughput of 802.11g is 25 Mbps. That assumes ideal conditions. To learn more about those conditions in your case, launch AirPort Utility, double-click on your AirPort station to enter "Manual Setup" mode, select the "Advanced" panel, click on the "Logs and Statistics" button, then click on the "Wireless Clients" tab. There you will see values for signal and noise. The closer those two numbers are together, the worse throughput you can expect.
    If the value for noise is high, you might try setting your AirPort unit to a different channel.
    All the above is based on your having no other Wi-Fi equipment.

Maybe you are looking for