Trying to add missing UDF, but keep breaking my existing layout!

Hi Everyone,
I am working with an existing layout in Crystal Reports.
Unfortunately a UDF that I require, and expect to be present, cannot be accessed. The UDF that I need to use is called 'U_INE_FreightR'.
I figured that it may be possible to remove the table, and then re-add it, and thereby obtain access to the 'missing' UDF. Towards this end I click Database > Database Expert. I then remove the table, OPOR.
Doing so gives the following warning.
I then click on OK, and proceed regardless of the warning.
Afterwards I re-add the required, OPOR, table (after making a relevant database connection).
Following this procedure produces the following error.
I have no choice but to click on OK here, so that is what I did.
Now when I look in the table for the required UDF it is present...
Following on I then save the modified form back into Business One (Add-Ins > SAP Business One > Save).
All appears to be well, however when I then use the layout in Business One there is a lot of information missing. I suspect that the errors with regard to missing content in the layout relate back to the error message "There are fields in the report from this file. Continue?".
I am now at a complete loss regarding how to make the extra UDF available in the layout, without 'breaking' the layout, and losing content.
If anybody can advice me on how to add the UDF without breaking my layout it will be greatly appreciated.
Kind Regards,
David

Hi Saado,
I have attempted your technique, however unfortunately I am getting stuck. Here are the steps that I follow -
1). Click on Database menu
2). Click on Verify Database
3). Enter the password into the OLE DB (ADO) dialog box - as shown below -
4). Click on Finish
I am then presented with the screen below, for which I do not know the correct values to enter -
If I simply click on OK I am met with the following error message -
I then click on OK, and follow this by clicking on the close (red cross) button.
The message below is shown -
I click on OK, and am presented with a Map Fields dialog as shown below -
I then click on OK, and receive the message 'The database is now up to date'. However I also receive the error message shown below -
I click OK, and am then shown the Formula Workshop, as follows -
Can you please provide further advice? I suspect that my mappings are out, but I don't have any idea about how to fix them!
Any further assistance will be greatly appreciated.
Kind Regards,
David

Similar Messages

  • Trying to open I tunes but keeps saying msvcr80.dll is missing

    Trying to open I tunes but keeps saying msvcr80.dll is missing

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I accidentally deleted my gmail account from my iphone 5, and have tried to add it back, but it keeps telling me the server isn't connected. Help?!?

    I recently deleted my gamil account from my iphone accidentally, and have tried to add it again, but it won't load mail. I get an error message that says my serve is not responding.

    That is the gmail server which has nothing to do with your iphone or Apple.
    contact gmail.

  • I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    You run Windows in Parallels or Fusion. Then in Windows you install the program.

  • I am trying to access iTune store but keep on getting message "cannot access iTune store" i have reset my password several times and it didn't help. My apple ID has been confirmed as correct. what can I do next?

    Hi all
    i am trying to access iTune store but keep on getting message "cannot access iTune store" i have reset my password several times and it didn’t help. My apple ID has been confirmed as correct. what can I do next?

    I am having the same issue!  I see several people are having this problem, and I see there is no solution from Apple!  Why is it I only see problems on this site and never any solutions?

  • Trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

    trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

    The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
    Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
    See also
    *[[cannot connect after upgrading firefox]]
    *[[options window - advanced panel]]
    * [[error loading web sites]]

  • How can I add a line but keep the number I have from tmobile

    How can I add a line but keep the number I have from Tmobile

    Hi, Janice!
    I'm just guessing, but I imagine you'd get your question answered faster in the AE forum.

  • I am trying to update the software but keep getting a 9006 error message. Any suggestions?

    I am trying to update to iOS5 but keep getting a 9006 error message. Any suggestions?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Try this - Disable your firewall and anitvirus software temporarily.  Then download and install the iOS update.
     Cheers, Tom

  • Trying to add a line but it says an order is pending

    I tried to add a line but was unable too because I had an order pending. When I checked to see what the order was it showed it would be complete in November of 2013.
    I'm having issues with my phone staying charged so I'm unable to call Verizon.
    What should I do?

        Hi loganpdailey,
    Let's make sure there is nothing preventing you from making changes to your account. From what you have described, a representative would need to review your account to determine what this order is. Please feel free to send me a direct message by hovering over my avatar and selecting "Message." You can also reach a representative by dialing *611 from your device.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • TS3694 i have tried to restore my iphone but keep getting error 1015 any suggestions

    i have tried to restore my iphone but keep getting error 1015 any suggestion

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • PROBLEM: Trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network

    I'm trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network in my home.
    I see the EXPRESS in ARPT UTILITY but when I click on "CONTINUE" or "MANUAL", the only option I'm given is to SWITCH networks, which I do not want to do.
    I am using a MACBOOK PRO (MAC OS X 10.6.8)
    Can someone offer me help with this?
    Thanks!

    Hi, I have a similiar setup.  When you click onto the express, and it asks you to switch networks, it's not actually asking you to "change" networks.  It's just actually switching to the xpress.  When the xpress comes up, you'll input the name of your existing network, which you set up and named for the extreme.  You'll have to change the extreme to "participate in a network", which is what you'll also do for the xpress.  In the extreme under the WDS tab, you'll input the wds mode as "wds main".  And then put a check mark in the "allow wireless clients".  Where it says wds remotes, you'll input the the airport id's for the xpress's.  In each of the xpress's, you'll set up as participating in a wds network.  In the xpress's, under the wds tab, you'll set the wds mode to remote, and check
    mark in the allow wireless clients.  You'll have to input the airport id of the extreme in the wds main block.  Under the internet icon on top, in internet conect tab for connect using: airport (wds), connect sharing: off (bridge mode).
    Remember to insure that the express's show the same channel as the extreme, if you're using 802.11n (80211b/g compatible).  Of course the security that you decide to use should also be the same.

  • Trying to remove an old version of I Tunes and keep getting the message "The folder path I Tunes contains an invalid character' . It won't let me go any further, have tried deleting/repairing the program but keep getting the same message?

    trying to remove an old version of I tunes, but keep getting the message 'The folder path I Tunes contains an invalid character'
    It won't let me go any further, have tried deleting/repairing but get the same message and am blocked from continuing?

    Hi Barbara,
    I had a similar problem recently and using the "more like this" feature I discovered an answer. To a problem posed by Holo7,  who like myself was a newbie on this platform,  b noir proposed a solution to Holo7's problem that also worked with my problem. It involves downloading a version of MS Windows Instal Cleanup and using it to completely remove all traces of the old version.
    If you look at my problem (follow OldGit66) and the link to Holo7's problem then you will find b noir's answer which I think may help you. I am new around here so you might want to wait for one of the higher status correspondents.
    Regards
    John

  • Using windows 8 and trying to install photoshop cs6 but keep getting message to close cs5 bridge

    using windows 8 and trying to install cs6 but keep getting message to close adobe bridge cs5 which I do not have open. Is this a bug in windows 8???

    bridge.exe is probably running in the background. Trying closing it via the Task Manager.
    See http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html

  • HT201413 i have tried resetting my iphone 4 but keep getting an error code at the end (34)

    I HAVE AN IPHONE 4, I HAVE TRIED RESETTING THE PHONE BUT KEEP GETTING AN ERROR CODE AT THE END OF THE RESET ie;34, ANY IDEAS PLEASE

    I'm not certain thats the problem. I stopped antivirus, I set screensaver to NOT trigger and yet it took me FOUR DAYS to completely sync my ipod touch. Stupid me decided to try it with the iPad and guess what...it's been three days and STILL timing out.
    I don't think Steve Jobs died; I think they upgraded him to iOS5, he crashed and they could not restore him.
    THIS UPGRADE *****. They rushed it out the door to get the fancy-dancy voice command thing on the iphones and yet that feature does not help ipod or ipad users.

  • I'm trying to add a contact, but cannot see the plus sign.  How do get to that screen?

    Hello, I'm trying to add a new contact to my Ipad 2 manually, but do not see the plus sign.  I added one contact, now I can't seem to add anymore.  The Manual refers to making sure I'm in the correct view, but I'm not sure what that means.  Any help would be appreciated!
    Thank you,

    I haven't read the manual so I 'm not sure what "correct view" is referring to.  When I add a contact there's a plus sign at the bottom left hand page.

Maybe you are looking for