Trying to add titles to project

how do i add titles to the scene/time line so it only effects one photo , it keeps on transfering the titles ie(fun in the sun) onto other photo images in the scen e/time line, i would really appreciate someones help its driving me crazy not to mention hours and hours of trying to work it out my self lol.

Are you using the slideshow editor in Photoshop Elements? If so you can create a blank slide and add a title. Or select an image, then choose the text tool to add a title on top of an individual photo. If you are using Premiere Elements, you will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Similar Messages

PE4 crashes when trying to add titles/text

PE4 has just begun (I have used it for over a year without experiencing this problem) crashing every time that I click on the 'add text' button. I can't get it to crash any other way except by trying to add or edit titles.
I am using Vista on an HP pavillion with 2.0 Gb RAM and 1.8 Ghz core duo processor.
Thanks for any advice or help that you can give me!
Erik

Erik,
Since it seems that working in the Titler (Adding Text) is causing an issue, you might want to investigate your fonts very closely.
The Titler in PE and PrPro are very, very sensitive to corrupt fonts. Other Adobe programs will not balk, unless you try to actually use one. Titler will crash and bring down the house, with just one corrupt font.
Best solution that I have is to get a copy of Font Doctor from Extensis and run it on your entire system. It will find all fonts, test them and repair most. Otherwise, it will allow to remove the ones that could not be repaired.
The other way to check fonts is more involved, hence my rec. above. Move half of your installed fonts (being careful to NOT Move any system fonts). Start PE and test Titler. If it works fine without crashes, Move half (of your original half) back and test. If it's fine, move half of that half back, and so on and so on. If Moving the first half did not work, then Move half of that half and text. Get the picture? The idea is to weed out by dealing in halves, rather than Moving one font at a time. As I have over 9k on the workstaion (not installed at any one time though), you can imagine the headache. Font Doctor found twelve corrupt fonts, and was able to repair ten. I then deleted the other two, and located them on a backup disc. They were fine there.
Good luck,
Hunt

PE7 crashes when trying to add titles

i uninstalled pe7 then installed it again.
i get as far as the "Add Title" box, but before I can start typing in it i get...
"Adobe Premiere Elements.exe has stopped working"
any fixes for this?

Welcome to the forum.
The biggest cause of crashes with Titler is most often a bad, or corrupt font. This ARTICLE will give you tips, and also tips on tracking down bad, or corrupt fonts.
Good luck, and hope that it is a simple font issue,
Hunt

Trying to add titles in IMovie. Using IMovie 8.0.6 and Mac OSX version 10.6.8. When I try to add titles IMovie shuts down. What do I need to do to stop the shut downs?

I can not add Titles in IMovies. When I click on the Titles, IMovie shuts down. I am using Mac OSX Version 10.6.8 and IMovies version 8.0.6
Was able to add some Titles yesterday, but had some problems with shut downs. Today I can not get past clicking on Titles without a shutdown

DK Flash,
http://support.apple.com/kb/TS3310 but you have 10.6.8. So this shouldn't apply. But just in case.
This had to do with the Far Far Away title causing iMovie to quit.
Try clearing caches and plist.
Do the behavior persist in a new user on the computer?
Calbe

Error when trying to add users to project

I am receiving an error when I try to add users to my projects. I have given all the new users the rights to see the projects I need them to see and when I go to the project right click select Project Access and click add users to project in the pop up window the next window that opens says "error" and has a Close button on the bottom right hand of the screen.
This is an urgent matter to get fixed need to have figured out as soon as possible need to get users added to have server go live by noon central time.
Thank you.

I presume if it's that urgent you've also logged a service request with Oracle Primavera Support, right?
What error does the server.log show?
have you checked if the MYPV user exists in the ADMN table, in the Expadmin db?

Add title to project.

Project is open awaiting title before exporting.

Hi Peggy,
Since this is a one time project and Boris 3D can be a little intimidating to first-time users, would you like me to create the title and send it to you as a Quicktime Movie that you can add to the beginning?
*If so, would you like any motion on it, or just a straight title?* Also, when you say:
+"Purple text on white background.+
+Wordscapes: The Art of Seeing the Invisible+
+KEYNOTE ADDRESS NAPT • April 2002•Denver, Colorado • Peggy Osna Heller",+ would something like this be adequate?
!http://farm3.static.flickr.com/2434/3548935810_1f20a0710c.jpg?v=0!
If you'd like, I could try to walk you through making it on your own, but if you are pleased with this I could just send it to you. Do you want any animation for the title (e.g scrolling in, rotating, changing size, a custom effect, etc.), or just a still? Is this font and size OK? Anything else that needs changing?
Message was edited by: skalicki`

I can't find movie in Media Movies when trying to add to iDVD project.

I finalised a project in iMovie and it is showing in the Event Library when i am in the iMovie programme. However, when I try to add it to the iDVD I am working on, it is not showing in the Movies panel in the media section. Please can anyone help.

Hi
Yes - You need to
• in iMovie
• create a NEW Project
• add material from Event's to this
• Edit it as much or little You want
• Share to Media Browser - and as Medium (ev. Large but can give Audio problems) and NOT AS LARGE ! and do not "Share to iDVD" as resulting DVD will be BAD.
• Close iMovie
• Now first open iDVD and Create a NEW iDVD Project
• Now You find Your movie - down to the Right - Media-button/Movies
• Drag and drop it into the big Menu window (not into a drop-zone) but so that it returns the text "Play Movie"
AND - Do as the rest of us - Save as a DiskImage - and test play this with Apple DVD-tool - to see that it plays OK - No need to waste DVD disks. If OK then burn the actual disk.
Yours Bengt W

PLEASE HELP! Add titles to still photos??!!!

Hi anyone and everyone,
I am working on a project that I need to add 'titles' to some still photos!!! I am using iMovie 5.0.2.
IS THIS POSSIBLE??? I've been pulling my hair out trying to get around it but cant....HELP!! Before I sign myself in!!
Thanks in advance
Alan

Alan,
"IS THIS POSSIBLE?"
Yes.
You don't say how you are going about trying to add titles. So I'm going to guess at what your problem is.
I assume you have placed photos in your timeline in iMovie.
To add a title, you need to drag the title down to your timeline by clicking on and dragging the little blue "T" next to the style of title you wish to use.
Also, make sure you have unchecked "Over black" if you wish your title to be rendered on top of your photo.
Welcome to the discussions! Post back if you still have problems.
Matt

Help! i'm trying to add multiple titles to my movie,but imovie won't let me

i'm trying to use titles to add supers to my mini commercial. this is what i've done so far: imported video. added sound effects. added a product photo at end of clip. added a title over first four seconds of clip. now, i want to add additional titles at intervals throughout the 22 second film. it won't let me. am i doing something wrong?

I had the same problem, cos sometimes imovie won't let you add more titles when you try to take them straight from the title menu. I happened to me mostly when the clip itself is quite short. While imovie won't let you overlay several titles, you surely can have several titles, one after the other, in your project. To do this, I used a little trick: Add some small clip to the end of your project. Doesn't matter what, you're gonna delete it again anyway. You can then add another title to this additional clip. Then you just drag this title from there to your actual clip and place it where you want it. And then you do the next one(s) the same way until you have all your titles where you want them. At the end you just delete the "helping" clip again. It might be a bit complicated way of doing things, but it worked for me.

QtCreator hangs while trying to add files to a project

Hi everyone.
When I'm trying to add existing files to my current project (or even create new project) a file manager window appears to choose a file/folder. No matter what I do (ok, cancel, etc) this window won't close, and it also hangs the whole qtcreator.
What's wrong with it?
qtcreator 3.3.0-1
DE - cinnamon 2.4.6-1
Thanks in advance.
Last edited by mkdy (2015-01-28 19:03:32)

Downgraded following packages to older versions:
qt5-base-5.3.2-2-x86_64.pkg.tar.xz
qt5-declarative-5.3.2-2-x86_64.pkg.tar.xz
qt5-quick1-5.3.2-2-x86_64.pkg.tar.xz
qt5-quickcontrols-5.3.2-2-x86_64.pkg.tar.xz
qt5-script-5.3.2-2-x86_64.pkg.tar.xz
qt5-sensors-5.3.2-2-x86_64.pkg.tar.xz
qt5-tools-5.3.2-2-x86_64.pkg.tar.xz
qt5-translations-5.3.2-2-x86_64.pkg.tar.xz
qt5-webkit-5.3.2-2-x86_64.pkg.tar.xz
qtcreator-3.2.2-1-x86_64.pkg.tar.xz
Works fine now.

Project window darkens when trying to add voiceover in iMovie '09

I am trying to add a voiceover to a short video in iMovie '09, but every time I open the Voiceover window, the project window darkens so I cannot click on the clip where I want the voiceover to begin. I have looked at all the tutorials but can't figure out what I am doing incorrectly.
Thanks!

This is what happens when I try to add a voiceover:

I am trying to add, through an amplification project, the field counts alte

hello dear,
I have a countable document with several positions with classes of costs, which have imputation object the order co.
I am trying to add, through an amplification project, the field counts alternative to transaction KSB1.
the problem that I have in the routine, is that, he/she repeats the last bill alternative to all the positions of the cost classes.
the routine is the following one:
clear CS_RECORD-ZZ_LOKKT.
select * from bseg where bukrs eq ld_documents-bukrs
                         and belnr eq ld_documents-docnr
                         and gjahr eq ld_documents-ac_gjahr.
        if not bseg-kostl is initial.
           CS_RECORD-ZZ_LOKKT = BSEG-LOKKT.
        endif.
endselect.
example of the result that it shows me:
It counts Alternative
30101001 COMMISSION SUB-AGENCY 113,64       6220000
30202001 SALARIES                             142,05       6220000
grateful of their help,
greetings
jorge silva

Make the back of the car a 3D layer. Add a camera. Animate the camera so the motiion looks right.
Another option, track something in the frame that is in the same plane as the back of the car. Track scale. Apply the tracked scale information to the back of the car layer.
A better way to get better suggestions. Post a screenshot of the video or better yet, upload the video to You-tube and let us see what you are trying to do.

Trying to add Admin account in project server 2010 via powershell

Dear All
Unfortunately some one removed admin account from PWA 2010 so i have tried to add admin account via powershell command
New-SPProjectSiteAdministrator -AdminAccount "dir\santosh" -Url "https://myserver/PWA"
New-SPProjectSiteAdministrator : <nativehr>0x80070005</nativehr><nativestack></nativestack> At line:1 char:31 + New-SPProjectSiteAdministrator <<<< -AdminAccount "dir\santosh"
-Url "https://myserver/PWA" + CategoryInfo : InvalidData: (Microsoft.Offic...ewAdministrator:PSCmdletNewAdministrator) [New-SPProjectSiteAdministrator], Unaut
horizedAccessException + FullyQualifiedErrorId : Microsoft.Office.Project.Server.Cmdlet.PSCmdletNewAdministrator
Getting above error
Help me
Regards
Santhu

Hello,
Can't you log in with an account that is already in the Administrators group then add the new account? I think you will need to run the command with a user account that already has admin access to PWA - I don't currently have an environment to test this
on.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

FRM-40735 Error when trying to add an employee as key member for a project

FRM-40735: ON Insert trigger raised unhandled exception ORA-06502 in PAXPREPR when trying to add an employee as key member for a project
Tried generating FND log messages to see if it shows any error messages but it didn't show any specific error.

Error ORA-06502 says PL/SQL: numeric or value error.
The Error could be in the data already exist in the system for key members. If this Project was created using APIs, there are possibilities that some other character( i.e. next line chracter ) got entered in the column value which Form "PAXPREPR" is not able to fetch or update.
You can query the key member data from back-end to check if any data corruption is there. you may require data-fix to correct that.
AB

Error when trying to add a project to Subversion source control

When trying to add a project to source control from within the OPM 10 studio (File - Source Control - Add Project to Source Control), the following error occurs:
"There was a problem accessing the source control system, probably due to network or contention issues. A retry is recommended."
This has been tried with Subversion versions 1.6.2, 1.6.5 and 1.6.6, with local repositories and repositories on a Apache webserver.
Once the project has been added to a repository, by using TortoiseSVN for example, working with source control is no problem.
Does anyone have a clue what the problem (and a solution) might be?
Thanks,
Theo.

Hi,
Davin mentioned:
This appears to be an issue with the source control integration. We are looking into it.I am using OPM 10.0.1.14
The OPM help on collaborating mentions:
Open a rulebase project from source control
To open an existing Oracle Policy Modeling project from a source control repository:
In Oracle Policy Modeling, select File | Source Control | Open Existing Project from Source Control. When I open the File menu I do not see the "Source Control" at all.
Is this caused by an installation error or part of the "issue with the source control integration" ?
Please let me know if I'm the only one experiencing this problem ....
Thankx,
Paul

Trying to add titles to project

Similar Messages

Maybe you are looking for