Trying to apply a "target" as _blank (I think?)

I am creating a simple set of pages and I want to have three links open new browser windows but leave the main page as is.
These links I did the following:
highlighted the link
used the inspector to link to a new page I created
in the behavoirs I added "open browser window" with size restrictions I want to have in place
In the "target" drop down I have tried _blank and also just an empty field.
What happens is this.
When I upload the page and click on the link, a new browser window opens, it is the correct size, but the main page also loads the linked page. I would like the main page to stay the same.
I am a relative html knuclehead, I tried looking for an answer, but I think I am doing almost everything correctly?
If it matters, the page was created from a bulit in Dreamweaver page design General-> Page Designs (CSS) -> Two-Column Left Nav
TIA
Henry

Thanks for the advice, but I am now making things worse. I was not sure where to place the "a href="javascript:void(0)" code and the frist post did not offer any solutions.
Thanks very much for your time.
Perhaps this will help
<div id="navBar">
  <div id="search"></div>
  <div id="sectionLinks">
    <ul>
      <ul>
        <li>
          <h3>Audio Files </h3>
        </li>
      </ul>
      <li onfocus="MM_openBrWindow('rft.part.one.html','','width=700,height=341')"><a href="rft.part.one.html" onclick="MM_openBrWindow('rft.part.one.html','','width=700,height=381')">Part One <span class="style4">(00:31:15)</span> </a></li>
      <li><a href="rft.part.two.html" onclick="MM_openBrWindow('rft.part.two.html','','width=700,height=381')">Part Two <span class="style4">(00:31:15)</span> </a></li>
      <li><a href="rft.part.three.html" onclick="MM_openBrWindow('rft.part.three.html','','width=700,height=381')">Part Three <span class="style4">(00:31:15)</span> </a></li>
      <li></li>
    </ul>
  </div>
  <div class="relatedLinks">
    <h3>Related Links</h3>
    <ul>
      <li><a href="http://en.wikipedia.org/wiki/Radio_First_Termer">Radio First Termer Wiki </a></li>
      <li><a href="http://daverabbit.podomatic.com/">Dave Rabbit's Podcast </a></li>
      <li><a href="http://www.radiofirsttermer.com/">Radio First Termer (since 1995) </a></li>
    </ul>
  </div>

Similar Messages

  • Exhange 2013 not working after trying to apply cumulative update 6

    Hi All,
    Please  can you help. Its been over a week since I tried to apply cumulative update 6 on my instance of Exchange 2013 and I am getting nowhere with it. With any user intervention it came up with errors in the middle of applying the update. I can't continue
    the installation nor can I roll it back. Most of all it has rendered the server useless.
    When I run the update I get the following error;
    $connectors=Get-ReceiveConnector - Server $RoleFQDNorName;
    foreach($connector in connectors){if($connector.MaxLocalHopCount - gt 1){Set-ReceiveConnector -identity$connector.identity -MaxlocalHopCount 5}};
    "Was run: "Microsoft.Exchange.Data.DataValidationException:You must provide a value for this property.
    at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception,ErrotCategory category,Object target,Boolean reThrow,String helpUrl)............................
    Please could you help?
    Thanks,
    Dominic

    I recommend that you open support ticket with Microsoft.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Starting in June of this year I had been trying to apply my company's...

    Starting in June of this year I had been trying to apply my company's
    Verizon discount to my account. The first time I went in the tech said that
    in order to do that the account, which was in my wife's name, would need to
    be switched to mine. But after doing some checking he said that wasn't
    necessary and that they would send an email to my work email which would
    include a link. I was to click on the link and then follow the instructions
    and since this was being done from my work email the discount would be
    applied to my account. I did that and naturally the discount never appeared.
    I went to the store again 2 weeks later and attempted to do the same thing
    and was told the computers were down and they couldn't help me.
    I returned again the next day and the computers were still down. I went in
    again the next day and the computers were back up and a tech tried to
    change the account to my name so my company discount could be applied but
    was having trouble getting the name switched. He phoned someone at Verizon
    and worked with them for a while and eventually put me on the phone with
    them. I gave them my information and told them what I wanted to do and
    after some time with him he said that the discount had been applied. Again
    the discount never appeared.
    The end of August I went into the store with the intention of not only
    trying to get the discount but to upgrade 2 of the 3 phones on my account.
    We picked out the phones we wanted and discussed an upgrade to the account
    and got all of that settled. At that time I mentioned that I wanted to
    change the name on the account so I could get the discount and the tech
    mumbled something and then told me that he couldn't do that. We continued
    with the phone and plan upgrades and left the store. What I found out later
    and what the tech failed to tell me was that Verizon was offering 1 Gig of
    data per month for each upgrade, so I got 2 addition Gigs a month for free
    which did show on my account summary.
    The following week I again went into the store in an effort to get my
    company discount. I was told again that the account name would need to be
    changed to mine which I agreed to. After an hour and a half, 2 techs and 2
    calls to Verizon the name was switched and the discount applied, at least
    that was what I was told, I'll verify that when I receive my next bill. At
    that point I asked if the 2 free gigs were shared data and was then told
    that in order to change the name on the account the old account needed to
    be closed and new one opened with my name and because of that any
    promotions that were on the old account no longer applied. I was never told
    this at any time during the process and if I had known I might not have
    changed the name in order to keep the free data. This also wouldn't have
    been a problem if the account had been changed any one of the 5 times I
    tried to change it prior to it actually being changed. This whole ordeal is
    completely unacceptable and was incredibly frustrating.  I lost 2 gigs of
    data, which has disappeared from my account summary and which I still feel
    I'm entitled to, because of the incompetence of not only one Verizon tech
    but several of them.
    I am wondering if anyone at Verizon is interested in resolving this issue
    by giving me the 2 gigs of data that i deserve.
    >> Personal information removed to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Error trying to apply patch 11.1.1.5.3

    I am trying to apply IDM patch 11.1.1.5.3 to a fresh install of IDM. I have IDM running on an Oracle Linux 5 server along with Weblogic and SOA. The database is hosted on a second server. The base IDM install works fine.
    I am trying to patch to 11.1.1.5.3 and running in to an error saying...
    Patching component oracle.oim.server, 11.1.1.5.0...
    [ Error during Update inventory for apply Phase]. Detail: OPatch failed: ApplySession failed in system modification phase... 'ApplySession::apply failed: Current access level does not allow writing to the inventory'
    I am installing the patch with the same oracle user used to install the base product.
    Any ideas on what I need to do?
    Thanks.

    Nevermind. I downloaded the newest OPatch. I used the OPatch that was in the /Oracle_IDM1 directory and the patch succeeded.

  • I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2 . I do the normal steps of lens filter and choose dji, phantom2 , and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert

    I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2+. I do the normal steps of lens filter and choose dji, phantom2+, and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert back to the old movie when I come back later on. I know I saved it but I must be doing something wrong. Here are my steps:
    Open an Mp4 movie
    Choose filter, lens correction
    Choose dii
    choose Phantom FC200
    click ok and the image improves.
    I then save as a name.psd and close the file.
    I reopen the file and it looks good. When I play the movie it just jumps back to the old curved horizon.
    What am I doing wrong? If you can help me I would be very grateful.
    Marc

    AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

  • System Preferences shuts down when trying to apply .CR2 image as background

    Hello-
    I have been trying to apply a photograph taken in RAW as a desktop background image. The file is .CR2 and when I click done to set it as the background, the background does not change and the notice comes up that System Preferences has unexpectedly shut down.
    Please help !
    Thanks

    As far as I know, the things you can do with a RAW file are pretty much limited to processing it with photo editing software. You could use iPhoto and save it as a jpg file.

  • Tried to apply movers coupon towards Macbook Pro

    I have been a loyal customer of Best Buy, since I was a kid. So when the time came to purchase a new Macbook I went  to purchase it at Best Buy. During my checkout I had tried to apply the movers coupon, but the manger would not accept the coupon. I read online that it didnt apply for apple acessories, but can be applied on laptops.
    Thank you for taking time to read this.

    Hello shrav97-
    I’m sorry to hear about the issues that you’ve had trying to use this mover’s coupon on the purchase of a MacBook Pro.  It certainly sounds like it’s been frustrating.
    As avm5689 pointed out, if you did not go online to register your coupon, the store would not be able to apply it to your purchase.  Otherwise, the mover’s coupon should be good on any MacBook Pro.  One thing that it a bit confusing though is whether or not you have actually made the purchase already?  I was not able to locate any purchase information for you with the email address you registered on the forum.  Can you also confirm if you’ve registered the coupon code online to activate it?
    I look forward to hearing back from you.
    Sincerely,
    Bill|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • When trying to apply a Policy, Get Error: An error occurred while performing this operation. contact an administor if this problem continues

    I have just installed ES4 LC with only the Rights Management Module. I have everything setup and can access the Policy server from Acrobat pro XI and can see and create policies.
    however when trying to apply any policy to my PDF I get the Error in the Subject line.
    for all intents and purposes, the setup and configuration looks fine but I seem to be unable to get past the very last step and actually use the policies.
    please can anyone help?

    Try this:
    Fix for Software Update
    See Troubleshooting Automatic Software Update in Mac OS X.
    Delete the following files:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
    /Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

  • Getting error whils trying to apply leave " hrtim00rec077 "

    Hi All,
    Getting error message no:hrtim00rec077 while trying to apply leave. There is no quota mapped to this absence type but getting the message "Absence quota 01 not found for grouping 1/41 on 20100401"
    Kindly let me know what might be the reason for this error.
    Regards,
    Srikanth

    Hello,
    Do you want quotas for this leave?
    First, check T554S if you have screen = 2001 and HR Deduction flag activated. This will enable the quota deduction.
    Then, you will have to configure T556A for the quotas
    Finally integrate all this with T556C - deduction rules and put more details on the selection rules on T559L.
    V_T554S_WEB just maps it to the frontend. I believe the big question here is if you have enabled the quotas and quota deduction for this absence type. That is why it's giving the issue.
    Regards,
    Bentow.

  • Employee is trying to apply leave through ESS

    When an employee is trying to apply leave through ESS he is getting a error message. below is the error " employee 00000000 has no valid organization assignment for 27.08.2010". we have checked all the configurations in SAP back end.

    Navigate to t.code HRUSER and see the assignment.
    This should resolve the issue.
    Cheers-
    Pramod

  • I'm getting an error (BEA-090508) when trying to apply SSL and starting the server

    I'm trying to apply SSL with my own CA on a Weblogic Server. I'm getting an error (BEA-090508) when trying to start the server.
    regards

    Hi peggy gray,
    I believe you have the Photography subscription purchased wherein the applications other than PS and LR are available as trial only.
    Please check the link below:
    Creative Cloud Photography plan | Adobe Creative Cloud
    Regards,
    Sheena

  • I'm trying to apply an animation preset but it's not working.

    I'm trying to apply an animation preset but it's not working.  I've done every procedure to apply a preset to a layer.  But there seems to be nothing happening.  I can't for the life of me figure this one out.  Adobe help simply says drag and drop the preset onto the desired layer, did it and nothing happended.  What am I doing wrong?  Please advise.
    I'm using version 6.5 Professional on a Mac Pro computer.
    Thanks.
    - NV

    No problem.
    You will probably benefit from reading through the "Text" chapter of After Effects Help and the tutorials and such that it links to.
    If you need to start from the beginning and learn about the basics of After Effects, then I recommend working through the items under the "Getting started" heading on the After Effects Help and Support home page.
    Yes, these resources are largely about the new version of After Effects, but text animation hasn't changed a lot since version 6.5. (Some, but not fundamentally.)

  • Out of Memory when trying to apply redaction to a document, how can this be fixed?

    I have a user that is trying to redact a document, and when she tries to apply the redaction, she is getting Out of Memory error, any thoughts on this? Is it a computer memory issue or something in the program that I can dump something to make room?  Thanks.
    Yvonne Shaw, CISR
    Technology Operations Manager
    Brunswick Companies

    Hey,
    Please mention the configuration of your system specially CPU and RAM.
    This error usually occurs, if you run too many memory-extensive applications simultaneously. So try performing those redaction tasks after closing some of the background processes/applications
    Hope that helps.
    Regards,
    Rahul

  • Red line and beeps when trying to apply Audio Filters in FCE

    I'm using FCE 4.0.1 and am getting red line and beeps when trying to apply Audio Filters. I have rendered the files. No problems with audio otherwise.

    Just as a point of clarification, you stated that you were "getting red line and beeps when trying to apply Audio Filters"  Did you mean when you applied audio filters?  Or just when you were trying to apply them?
    What is the format, sampling rate and bit depth of the audio?   Does it happen just with certain filters or with any filters applied?
    -DH

  • I am trying to apply for a job on line and I am receiving this message t has been determined that you are currently running a "Popup Blocker". In order to continue, please allow this site from within your "Popup Blocker" preferences. How do I fix this?

    Hello,
    I am trying to apply for a job on line and I am receiving the following message "
    t has been determined that you are currently running a "Popup Blocker". In order to continue, please allow this site from within your "Popup Blocker" preferences
    How do I correct this??
    Thanks!

    Open Safari preferences, click on the Security icon in the toolbar, uncheck the pop-up blocker option.

Maybe you are looking for

  • CS5 Project Copy disappeared!

    Hi, I am new here and Im hoping that someone can help! Working on CS5 - worked on project and sequences fine, drawing rushes from hardrives... Project file saved on desktop Saved a copy of the project to the desktop (same location as original!) Brief

  • Scenario to call c programs from pl/sql

    I know that c routines can be called from Oracle pl/sql. But, I would like to know that anybody has the realtime scenario where it is unavoidable. Please let me know if anybody has any specific scenarios. Thanks in advance Sudhir

  • I can't reauthorise my computer I really need to speak to someone - how do I get to chat to a real person at adobe?

    I need to talk to someone about authorisation - I have a sony ereader and can't down load my book because I can't reauthorise my computer. Can anyone tell me how I get to talk to a real person!!!!!

  • How i can change my opeator on my bb

    Hello, i have a bold (orange unlocked), but i use the vodafone network (sfr france). can i install the BlackBerry Handheld Software for vodafone to update my phone ? is there a original rom without any operator specification ? thanks in advance.  Sol

  • 4s charging

    My iphone 4s will charge in the car but does not recognize the electical charger or usb when plugged into computer.  have tried several cords.