Trying to attach my time capsule to my cable modem box, which is a Virgin media Scientific Atlanta box. Problem is the apple set up tells my to put in the IP address for the virgin cable modem, which I cannot find. Can any on assist?
can any one help with is problem.
In what screen of what application are you asked to enter that IP address? The only place I'd expect to see such a prompt is to let AirPort Utility access another AirPort base station. Your Scientific Atlanta box isn't one.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.
Similar Messages
-
SO MANY PEOPLE ARE HAVING THIS PROBLEM! I'VE BEEN TRYING FOR 4 HOURS!!!
Anita, (is this mic on? : )
I know that this (see first link) has no artistic value, but it's one of my GIFs that best describes what I do with Adobe Photoshop, for a living.
Can you comment on it and a few other things on my website (in vew of my eventual participation to the Reel)?
http://retouching.com/Animation1.html
http://retouching.com/Animation6.html
this is just a fun piece:
http://retouching.com/LT/LiveBeard.gif
if larger images are needed, I could animate those JPEGs:
http://retouching.com/LT/copSky.jpg
http://retouching.com/LT/copSkyCar.jpg
http://retouching.com/LT/copSkyCarUniform.jpg
http://retouching.com/LT/copSCUpolaroid.jpg
http://retouching.com/LT/cop.jpg
This is cute (but it's my daughter, so you and others may not think so or find a use for the GIF in the Reel):
http://retouching.com/LT/EdgeBook/howCute.gif
This (and other linked items) has artistic value but it's not animated:
http://retouching.com/LT/todie/kaleida.html
Thanks for your feedback!
(err if there will be any; if not,.. have a nice day! : ) -
I did not have my backup with me when my hard drive failed and was replaced at the Apple store. Now it will not download to my new hard drive. A message says that "the volume has the worng case sensitivity for a backup". How can I resore my data from the backup?
Thank youThis is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
Unfortunately no one here can access your support history. You must respond to the emails directly. -
E4200 v2 - Uses multiple MAC addresses for the same device
This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients? -
My new iPad, when I try to get something from the Apple Store it tells me that My account i snot vlaid for use in the U.S.store. And to switch to the Australian store before purchasing, how do I do this? I am in Australia?
There are instructions on this page for creating an account without a credit card : http://support.apple.com/kb/HT2534
You can download a copy of the iPad manual from here : http://support.apple.com/manuals/ipad/ -
I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?
A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482 -
I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
Thanks!It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them
-
I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.
On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time. -
How do I find the MAC address for the time capsule?
I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?
On the bottom label it should list the MAC address.
If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
But you see that was before Apple reduced the airport utility to the status of a toy..
Pretty pictures no info.. think kid's book.
See very very pretty.. as a UTILITY though.. useless. -
What is the default ip address for the Time Capsule and Airport Extreme?
What is the default ip address for the Time Capsule and Airport Extreme?
Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.
-
Trying to connect Airport time capsule to my leopard iOS mac. Downloaded software for time capsule for snow leapard/leopard but still says I need more software. What do I need? I have a 10.5.7 iOS (Leopard). It connects to wifi at speeds in the airport and has plenty of storage capacity and memory.
If your Time Capsule looks like this..
Please review the System Requirements to set up and administer the device.....
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and Airport Utility 6.3 or higher
http://www.apple.com/airport-time-capsule/specs -
Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...
Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests. -
While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents." Any ideas?
Are you restoring from a TM backup??
Check the methods Pondini outlines to do restore.
Q14-17
http://pondini.org/TM/FAQ.html -
My apple id has been hacked and there was changed an email address for the apple id! so now i don't know which email it is! Please help! There was bought for 50+ $ !
just try to make a new apple id with the same name. because the hacker change the email, so your apple id before is not active or not use.
Maybe you are looking for
-
Ipod classic no longer supported under new Itunes?
I have an older 160GB IPod classic which is only used in my Porsche as it syncs best with the sound system. After downloading the latest Itunes software onto my PC yesterday, I see that I can no longer autofill or otherwise navigate through my Ipod v
-
The page that you are trying to open contains a movie that is referenced to an incorrect version of
I programmed a set of quizzes in Director 8.0 for one of my courses about ten years ago and have been updating them since. And, yes, I did purchased 11.5, but can't use it because I can't use printing w POM or a number of other extras anymore. My sem
-
Can I use more than one version of Adobe Reader on an iPad, 8.1 touch and 11.1
Can I use more than one version of Adobe Reader on an iPad adobe Reader Touch and Reader 11.1 . . I use Acrobat XI Pro although I had some old files that were stored on adobe.com from a prior version of acrobat 9 student edition. I guess the same
-
Hey everyone I have been trying to make a rather simple relay control timing circuit and I keep running into errors when I flip the trigger swithch. I get a simulation error that wants me to run a convergence check. When I run the check, it will not
-
Hi, Is there any way to have true scrolling of the data output of a region? Using region header footer div tags isn't really scrolling the data itself, just the first set. I still have to use the pagination options (which don't include scrolling). I'