Trying to build a DVD, having problems

The DVD I have been working on is ready to be burned to a dl/dvd. Encore starts to make the menus as it finishes up that a alert box pops up saying I don't have permission. I have the permission settings on my computer open for anyone. The only thing I see is the folder on the desktop is set to read only in the properties. And I can uncheck it, hit apply and then Ok and when I check it again is right back to read only. Can that or is that the problem? I'm about a month behind on this DVD and starting to really hate Encore. Please help!! Thank you.

Also, do not use the Desktop Folder, as it has some real limitations. It should only be used for your Short-cuts.
Good luck, and hope that Run as Administrator and the use of another folder will solve the issue.
Hunt

Similar Messages

TS3694 Hi,I have an iphone 3g that is "not" jailbroken,nor have I tried,however,I had been having problems with it shuting down&not starting again so I updated&tried to restore only to have an error 1015.The iphone is now stuck on the connect to itunes,pl

Hi, I have an Iphone 3g that is "Not" jailbroken, nor do I want it to be jailbroken. However, I had been having problems with it shuting down and not starting again. So, I tried to update and restore only to get an "error" 1015.
It is now stuck on "connect to itunes"
Any help would be great as this is a factory unlocked phone

Apple in no way blocks devices.
Carriers can blacklist devices from their network. If that is what has occurred, only the carrier can remove the blacklist. This should have nothing to do with your ability to activate the device and use it as an iPod.

My iphone sometimes rings and sometimes goes to VM. I have tried powering down and still having problem

My iphone sometimes rings and sometimes goes to VM. I have tried powering down and still having problem

solved phone in do not disturb mode

Trying to build a DVD image, DVDSP4 says not enough space

I have many years' experience using DVD Studio Pro 4, so this hopefully is not a stupid question.
I'm using an iMac with 80gb free and an external HDD with 12gb free. I have authored a DVD in DVD Studio Pro 4. The project says it's 4.6gb.
I need to make a disc image file of the DVD so I can burn it to DVD media using another computer. When I do this, it encodes for hours and then says "Formating Failed. Not enough space of the output media" (I might be paraphrasing.)
The only possiblt output medias, the iMac and the external drive, both have plenty of space, and the project is under the limit. So what gives?

Let me try this again, because I think we're not communicating.
I have authored a DVD Studio 4 project with menus and assets, etc. It simulates just fine. The tab on the top of the DVDSP screen indicates my project is 4.6gb. This means I should have no problem turning this project into a DVD. The computer I'm working on has no DVD burning capabilities so I want to create a disc image of the project instead of burning a DVD. I have done this before, where DVDSP encodes and builds a file that I can then use Disk Utility to burn to a DVD. So, once I have my disk image, I will transfer that file to another computer, and use Disk Utility on that second computer to burn the DVD from the disk image.
NOW
The problem I'm having is that DVDSP is not able to make the disk image. When I go to "Build/Format", it should make a disk image, but instead, I get an error saying there is not enough space on the output device. The "output device" in this case is my external Hard drive which has plenty of space. That is why I am asking for help.

I keep trying to build a DVD and it has a hardware error.

Hello,
   I have build a lot of DVD projects in Encore and they've come out fine. But I often get a window that says Encore has a hardware error.
       The window that comes up says 'Encore was unable to complete the operation because of a hardware error (Sense Code 37303). Please contact the hardware manufacturer for more infomation.'
      When I erase my Mac then reintsall all the software it will build the project; that fixes the problem, but it takes too long (about 5 hours). Is there a quicker fix?
Thank you for your replies.

Thank you so much for your reply Shuchi.
I fixed it after reading this disscussion.
http://forums.adobe.com/message/1808812#1808812
John T. Smith's answer #10
I just followed the 1st suggestion-
-Use the SLOWEST possible burn option your burner will allow in Encore, from 8x to 1x.
Have a good week :y

I am trying to build a DVD from an Everio Camcorder in 16:9. but output is 4:3

Hi,
I can't seem to be able to fix this problem. The settings I use in Premiere Elements 9 are as follows when I Open the project: NTSC, Hard Disk Flash Memory Camcorders, Widescreeen 48KHZ. When I bring my scenes in the timeline, I get a warning:"Mismartched Project Setting Preset" . I does not matter if I click Yes or no, they come out 4:3. Also when I create a DVD, I use the setting NTSC Wide Screen Dolby DVD.
I can figure out what to do to fix that. Also, just spent an hour on the phone with a tech about blurry output and the resolution was to change my files .MOD to .M2V. It could be a pretty long process. With those issues, it is getting to be pretty frustrating.
Thanks for your help,
Luc

Lut,
Welcome to the forum.
What are the full specs. of your MOD, and M2v files?If you do not know exactly, you can use G-Spot, or MediaInfo, to gather that info.
That info might help pinpoint the issue.
Good luck,
Hunt

I'm getting an Internal Muxer Error when trying to build a DVD project with still menu images

It originally happened with moving menu content and a help search said it was due to the loop point on a menu being after the end point of the asset but this was not the case.
I've now changed all the menu content to static images and the error is still occurring.

If you want a still image for your DVD menu, click on the Menu in the Outline, then look at the Inspector. Is the Duration set to 0? If not then change it to zero. Also look below that to "At End" and make sure that is set to Still.
Also make sure the image that you imported was a RGB image in either JPEG, TIFF, PNG, or PICT format (PNG would be your best choice), and that the image is SD resolution (i.e., 720x480 for NTSC).

Trying to reset security questions having problems

Need help resetting security questions

Click here for information. If you can't reset them through the method described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(95720)

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

I am trying to connect my Sony DCR-TRV350 to iMovie so that I can make DVD's from family videos. I am having problems getting the video camera connected. Any advice on how to do this?

I am trying to connect my Sony DCR-TRV350 to iMovie so that I can make DVD's from family videos. I am having problems getting the video camera connected. Any advice on how to do this?

What happens when, after you connect your cam, you go to File > Import Media?
But before that, does your cam require you to export your video files upon USB connection? I have a JVC Everio HD and I have to "Export to Library" from the cam's menu first-thing. This was true even in prior iMovie versions.

I was having problems burning DVDs' fro iDVD and it turned out my burner is at fault I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK?

I was having problems burning DVDs' from iDVD and it turned out my burner is at fault.
I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK? I have seen these with SATA is this the correct cable for my mac?
I have also tried the Mac superdrive but my imac wont recognise it as it's been configured for macbook air and mini mac. I know I can "make" it work by doing something or other in com.apple/plist, but dont want to mess about in there.
I'm also told an external drive would work but does "mac compatible" mean only for air and mini as their own superdrive is or all macs?
Any help appreciated before I convince myself mac is no better than windows pc!

Thanks but this didn't really help.
I can buy the drives at a dozen places but none of them seem to know what connection is correct (SATA etc) and that includes the apple store. It was the store who told me buy the superdrive and all my problems would be over. Wrong! It isn't recognised by imac as it's confifured for air and mini mac. Only way to make it work is as i said in earlier post. (Would you be happy buying a car you were told would start and then discover you have to open the bottome and fiddle to make it go?)
The apple store I would not even consider taking it to. Days without the pc, over priced and don't have a good reputation for actually fixing things!
But thanks

HT2129 Having problem with playing DVD on Superdrive

Having problem playing DVD on my MacBook Pro, (like info DVD from comanies..etc,), it keep ejecting after trying to run, some time if I keep inserting it back it does play, but lately that's not happening, any advise...? is it my Superdrive, software, how to resolve it..? I am now in Iraq and no Apple store in sight..

pavilion_alex wrote:
phones like 5800 and other similar must be updated because a new update solves the existing problems on the device.
download and install this http://www.nokia.co.uk/get-support-and-software/download-software/device-software-update/download and carefully read the instructions it gives you before the update.
...Or return the phone and replace it with something from another manufacturer that either A) works out of the box, or B) doesn't require such an awkward and painful update procedure. Nokia seem incapable of either.
Message Edited by garnett on 26-Oct-2009 12:49 PM

I am having problems importing from a DVD or a CD to my Ipod nano via windows 8. I initially set everything up on a computer with windows 7, and authorized the windows 8 computer as well. Howevre, the oly thing that comes up on windows 8 is my purchases

I am having problems importing to my Ipod nano via windows 8. I usually do this from a windows 7 computer and have had no problems; hoever in windows 8 I can only see items purchased in the Itunes store. I do not have access to my entire library, which includes song uploaded from CDs and some videos. As a result, I'm having problems uploading any new items from CDs or DVDs. The computer with windows 8 is an authorized computer, so I don't understand why I'm having the problem.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

I am having problems updating my itunes to the latest version, on each stage I am getting a message 'The feature you are trying to use in on a network resource that is unavailable.' I try to click OK it fails and I do not know an alternate path to select

I am having problems updating my itunes to the latest version, on each stage I am getting a message 'The feature you are trying to use in on a network resource that is unavailable.' I try to click OK it fails and I do not know an alternate path to select, please help?
I get message like below on each stage of the update, Quicktime, Safari & iTunes;
It's so annoying as until I update my iTunes account my phone won't sync.

Many thanks for the screenshot. (The key to these is knowing which particular .msi file is being mentioned by the message.)
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
(Assuming that the QuickTime and Safari messages were also citing bonjour64.msi, you should also then be good to go with those installs too.)

I have just upgraded from an iPhone 3Gs to an iPhone 5. I am trying to transfer all my content via icloud but having problems logging in - it keeps telling me the server is not responding. Nano sim hasn't yet been registered - does this affect things?

i have just upgraded from an iPhone 3Gs to an iPhone 5. I am trying to transfer all my content via icloud but having problems logging in - it keeps telling me the server is not responding. Nano sim hasn't yet been registered - does this affect things?

Have you activated your phone with your carrier yet?

Trying to build a DVD, having problems

Similar Messages

Maybe you are looking for