Trying to burn a DVD on iDVD 4
But when I click the "burn" icon, I get "ERRORS IN PROJECT-- There were errors during the project validation that to be fixed before burning the project." I went to open DVD map. I changed one thing that might have been a problems and it still gives me the same message when try to burn a DVD. Anyone have any ideas? Thanks
Jack
Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK will work under Leopard)
• Program miss-match. iDVD’09 v. 7.0.4, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (does work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W
Similar Messages
-
I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?
I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards -
I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?
Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W -
I've deleted encoded materials, and still no luck. What else can I try? I am using idvd 7.1.2. The slide show was created in imovie.
Hi
How did You go from iMovie to iDVD ?
I never use "Share/Export to iDVD" as the result will be bad and especially so if photos are used and NO Ken Burns effect is used.
I do "Share to Media Browser" and as Large (no HD or other sizes) And in iDVD I import it from Media button / Movies.
• Trash iDVD pref. file
• Repair Permissions
can also help
Yours Bengt W -
I am trying to burn a dvd. I created it on Imovie shared it to Idvd and am trying to burn it on a memorex dvd-r from my mac os x laptop. Each time it attempts to bunr and then ejects it early. Usually near the end. Please help.
You will get better results if you use the Share ➙ Media Browser menu option and then drag the movie from the Movies pane of the Media Browser in iDVD onto the menu window.
Also I suggest you use this workflow which I learned from Bengt:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said
"ERRORS IN PROJECT
There were errors during the project validation that have to be fixed before burning the project."
What does this mean and how do I fix it.
jimHi
Do You have a NEW Mac ?
Does it really have iDVD ? New ones Don't.
Please tell much more
• Mac used
• Program used (versions)
• Material used (Codecs, file formats etc)
Yours Bengt W -
I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, ScottHi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W -
I am trying to burn a dvd and it will not allow me to do this because it states I do not have enough space for encoding. how do i free up space and from where?
iDVD can only use your startup hard disk for the "scratch space" it needs for calculations during the encoding process. 25 GB is a good average requirement, but a large project (3 or 4 hours of content) might require more.
To free up space, you will have to move items to an external hard drive and/or delete items you no longer want.
Please note that iDVD can't use and external hard drive for this "scratch space". -
i tried the idvd forum but havent got any responses- since this forum has always been such a help i figured i'd try it- does anyone know how to free up disk space for encoding assets on idvd- apparently its a 'multiplexer' problem- or can someone fill me in on how to use the disk utility to burn a dvd after i have already exported my project from final cut express as a quicktime movie - i have also tried to print to video and it prints sound but the picture doesnt come up in the playback- says the data is incompatable- help!- i cant sleep till i figure this out-
thanks
joshHi suprjosh
A multiplexer error is usually occurs when burning to a poor quality DVD disk. It can also happen if you are trying to burn the DVD at a too high of a speed. Verbatim is very good. Try burning a disk image from iDVD first. From there use disk utility to burn a DVD. Disk utility will allow you to select a burn speed. Try 4X at most. If you are burning directly from iDVD buy a disk rated to 4X not 8X, 16X etc. It's just too fast and you'll get multiplexer errors.
Good luck
Carl -
I have created a iMovie and wish to burn it to a DVD.
I successfully shared media to browser in preparation to burn to DVD using iDVD magic.
I am able to successfully preview however when I try to burn I receive a error indicating "Not enough disk space on assets"
I am currently using a Macbook Air
Version 10.6.8
Model Name: MacBook Air
Model Identifier: MacBookAir3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBA31.0061.B01
SMC Version (system): 1.67f10
Serial Number (system): C02DRL8JDDQX
Hardware UUID: 53310599-83EA-5F58-99A9-AE505506BBFE
Capacity 60.32 GB
Available - 2.49 GB
The iMovie I am trying to burn is 45 mins long
Any suggestions would be greatly appreciated...Reduce your burn speed to 1/2 the Rating of the Media.
Disc Burner
If more than one supported disc burner is connected to your computer, choose one from the menu.
Preferred Speed
When you burn a CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Disc Format
Choose the type of disc you want to burn: Audio CD; MP3 CD; or Data CD or DVD.
Gap Between Songs
Choose the amount of silence, if any, between songs.
Use Sound Check
To have all songs on the disc play at the same volume, select this option.
Include CD Text
To include information that CD players in some vehicles can display, select this option. -
Why can't I burn a dvd from idvd? Could it be due to Mountain Lion?
I have upgraded to Mountain Lion. I am now unable to burn a dvd from idvd. Could ml be the problem? I have purchased new media-verbatim DVD-R. I can burn Cds. Help!!!
I solved my issue. I tried three different brands of DVDs and imation finally worked. I had used the others before and they worked perfectly. So what is the deal, but anyway I found one that worked!!!
-
I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
Error 0x800703EE on Win 8.1 machine when I tried to burn a DVD.
Hello,
I have below mentioned error when I tried to burn a DVD on my HP laptop.But same file can be copied to the USB drive without a problem.Can I have a solution for this ? Thanks in advance.
Error message : Error 0x800703EE : The volume for a file has been externalley altered so that the opened file is no longer valid.
Note : Win 8.1 - 64 bitI have sorted out above issue by disabling the defender and Fire wall.Cheers ! :)
-
My imovies no longer show up in media options when i am trying to make a DVD from iDVD.
it says "to se imovie projects here, use imovie 3 or later..." but i have not changed anything. even more odd, when i tell it to look at an external drive where i store old imovies it sees only a few of the many i have there. it's like the extensions of some movies got changed or something. help please and thanks.
Where do I find the idvd icon so I can burn a dvd?
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219 -
I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? I have tried rebooting through PRAM and various other options that I found online, but nothing has helped.
ThanksTry using a different brand of DVD's.
Maybe you are looking for
-
I moved my iTunes library over to another hard drive, and had to resync my playlists. My voice memos are now all on my computer and showing up in iTunes but they're not on my iPhone 5. I'm running Windows and iTunes 11 (latest version). I keep che
-
I updated my ios to the newest version and after 4 hours im stuck into the restore mode, i sync my phone to itunes and restored and updated after 3 hours I got a quick message in a red color and im stuck on the connect to itunes ...how can i fix this
-
Multiple Custom Synch Plugins For Same Business Object
Can I make multiple plugins for the same business object? The main reason I'm asking is because I want to have one item plugin that runs before the core item data synchs and another item plugin that runs after. Since the topic's here, if multiple plu
-
Linksys E2000 router is incompatible with Linux?
Hi All, I have Cisco/Linksys E2000 router setup for home wireless network. I had been setup while ago and well working since then. Now the challenge: I need to know or to change the wireless guest network password. Linux support says it can be done O
-
Hi, Can anyone help me, what is the difference between open items salses report and Backorder sales report? Explain in detail immediately if any one knows the result. bye shriraam.s