Trying to burn Blu-ray on Power PC G5

Does anyone make a Blu-ray video authoring software program that does not require an Intel processor? I'm trying to use Roxio's Toast 10 with BD/HD Plug-in but is is not working.
I have a Dual 2 GHz PowerPC G5 running OSX 10.5.8 (Leopard) with 10 GB of Ram and Final Cut Studio 2 (Final Cut Pro 6.0.4)
My Blu-ray burner is a LaCie d2 Firewire drive.

My Toast 10 now works in burning Blu-ray video. I've learned from other posts that there was a problem when I updated to QuickTime 7.7 in that certain video file types were no longer recognized. Unfortunately you just can't install an earlier version over the newer version the traditional way.
I've learned however that there is a way to install an earlier version of QuickTime (in my case QT 7.6.4 without completely re-loading the Operating System software (Leopard for me).
There's a Shareware program called Pacifist which takes elements from the earlier QuickTime installer and replaces the newer versions problem files. The QuickTime version # still says your current version but the elements have changed. See this link for how to do this:
http://www.digitalrebellion.com/blog/posts/using_pacifist_to_downgrade_quicktime .html
After rebooting, the QuickTime Player (and more importantly Final Cut Pro) supported all the video files. Toast 10 still had a problem until I trashed the Toast plist and pref files in the User>Library>Preferences folder and then re-installed Toast 10.0.9. Now everything works!
I still want to buy a better Blu-ray authoring program because the menus in Toast are so basic.

Similar Messages

I'm getting an error when trying to burn Blu Ray.

When trying to burn a Blu Ray disc in Encore it is giving me an error that says, Blu Ray Object "wedding 6-20-09 tru blu.m2v" export
file not found . Please help. Thank You .

First, Fix Encore Win7 Problem http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Second, shorten the name and remove all spaces and non-letter characters
Long File Names Cause Crashing http://forums.adobe.com/thread/588273

Encore crashes when trying to burn Blue Ray DVD.

Using Encore CS4 in a Vista Ultimate 64 bit PC with 4GB Ram.
Using Dynamic link from Premiere Pro CS4 with an AVCHD movie.
Transacodes without a hitch and when ready to burn get program error.
Using a Plextor BD-R PX-B900A ATA drive. ROXIO media creator 10 gas no problem writing to it either BDs or DVDs.
Encore write just fine using DVDs, it's just Blue Ray that has the problem.
Any Suggections?

Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC, I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC,
I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING...

Maybe the problem is caused by a stuck CAPS LOCK key? 8/

"media not present" error when burning blu ray in PE12

I have two systems, both ground-up builds, identical Win 7 Home Premium and Premiere Elements 12 installs. Both systems have internal blu-ray burners. One burner is an ASUS BW-12B1AT and the other is a Pioneer burner (don't recall the model number).
System 1: Intel 4770k with Gigabyte MB
System 2: AMD 8-core with Gigabyte MB
System 1 gives "Media not present" error in PE12 when attempting to burn to blu ray discs using Verbatim discs. System is able to burn DVDs and CDs, and playback blu ray discs. System is also capable of burning blu rays using Nero.
System 2 works fine - blu ray media is recognized instantly by PE12 when in the drive and burns blu rays perfectly.
I swapped the blu ray drives and SATA cables from System 1 and System 2 with the same result - this eliminated the drive manufacturer and cables from being the problem, as both drives worked perfectly in System 2 and neither worked in System 1. I also tried different SATA ports and power supply taps on System 1 without any success.
Then, I noticed that on System 1, with the dialog box open and indicating the "media not present" error, if I ejected the blu ray disc and reinserted it, the burner LED would flash 18 times (approx. 1/sec) and then pulse briefly indicating a burst of activity for about 1 second, as if it was either reading the disc or writing to the SATA. If I pressed the "rescan" button during this brief burst of LED activity, then the disc was recognized and I could proceed to burn it. If I tried to press the rescan button at any time before this instant or after, the "media not present" error did not clear.
To me, this is an indication that something in the handshake timing of the SW and the burner is not correct, and that timing differences in the system HW are not provided for in the SW. I see that many others have had this issue and have had to buy work-around image burners to address this. I believe your burner drivers need to be reworked to eliminate this bug. This is evidenced by the fact that Nero works and your SW does not, and that different systems consistently exhibit this problem.
Please let me know when you will have a SW patch to address this or if you have any idea of system settings that can be adjusted (I don't know of any myself) that would eliminate this problem.

pastrobes
This is not Adobe. Rather user to user. If you want to contact Adobe, your likely route is via Adobe Chat.
If you have a feature request or bug report, then consider filing a Adobe Feature Request Bug Report Forum with Adobe
Adobe - Feature Request/Bug Report Form
The likelihood of an Adobe engineer seeing your thread here is essentially slim to none.
Your results are very interesting but lots more variables to consider.
Do you have any version of Premiere Elements other than 12? It would be interesting to learn if a prior version's burn
dialog would present with the Media Not Preset issue for your burn to Blu-ray System 1. That is easy enough done with a tryout of
11 or 10 or 9 from the following web site. ProDesignTools: Adobe® Developments in Focus
On the other side of the coin, you could give the new version a look in this regard. A new version is expected at the
end of September 2014.
As an aside, have you updated 12 to 12.1 Update, using an opened project's Help Menu/Update. If not, I would encourage
you to do so. It does correct an Expert workspace text styles issue plus other matters undefined by Adobe.
ATR

Is my hl-dt-st bddvdrw gbc-h20l capable of burning Blu Ray discs (BD-R)?

Hello. I have a HP Pavilion Elite m9470 Desktop PC with an hl-dt-st bddvdrw gbc-h20l drive running Windows 7 Ultimate (the pc came originally with Vista). For the first time I tried to burn a Blu Ray disc BD-R in fact. When I loaded the disc into tray, the pc started trying to read the disc, without success for endless minutes. In fact the door could not open even manually - I had to restart the system to take the disc out.
I always thought that the specific drive was capable of not only reading but also burning Blu Rays - could someone let me know? Is it a matter of appropriate software?

You're welcome.
Click on support & driver links on the HP site, enter the complete model # of the PC, you will see a links for information pertaining to your PC, like: HP Pavilion Elite m9470gr Desktop PC Product Specifications
Enjoy

Burning Blu-Ray: Sometimes successful / Sometimes not

I've been burning Blu-rays for the last couple of days. After a couple of burns, I get this message:
But, here's the deal:
I do indeed have a disk in the burner
I can't eject said disk (so the computer may "find it") without dismounting...
If I do unmount the burner, FCPX starts the burn process all over... with the same above message
A "cycle" ensues... until I restart--not just the app--but the computer.
Then... I'm good for a couple of burns before the cycle starts again.
Trouble shoots:
I've tried this across TWO different burners--two different brands, one NEW out of the box. Same result.
This has happened across TWO different projects in the same library
Anyone have any ideas?

Luis Sequeira1 wrote:
But I don't know if Disk Utility or some other program can burn the image to Blu Ray.
G'Day Luis,
Yes it works just the same as DVD.
Al

HOW LONG TO BURN BLU RAY VIA COMPRESSOR 3.5?

Does anybody know the ballpaerk figure as to how long a 115 minute FCP 7 project exported to self contained movie and brought into Compressor 3.5 to burn a blu ray disk on an external blu ray writer will take? Is Roxio Toast any faster? Thanks much for your help.

iamfrustrated wrote:
This is getting more interesting by the minute. I have now set the project up as two blu ray DVD's -each around 72 minutes. When I go to 'send to compressor' from fcp 7, if I select HD DVD 90 minutes (assume that is the correct method as there is no 'blu ray' option) and then set Job Action to Blu Ray, I get the message with that nice little yellow triangle warning stating: "Cannot create Blu Ray disc as no target that is either mpeg 2 video elementary stream or H.264 stream". The fcp project in compressor is dolby digital prof. 2.0 and HD H.264 6.75 mbps.
I'm obviously doing something wrong here(?)
The HD DVD presets create files that are usable in DVD Studio Pro for making HD DVD's - not for authoring Blu-ray discs.
Here's what you need to do:
Create a new preset from "H.264 for Blu-ray".
Leave the video format and frame rate set to automatic, but lower the bitrate down to 20 Mbps with a max of 25 Mbps.
Then add a Dolby Digital Audio track as a second target.
Under job action set to create blu-ray disc but save it to the hard drive rather than trying to burn directly. (I know this an annoying extra step but there's been issues reporting with burning Blu-ray/AVCHD discs over 10 minutes in length.)
This will get it onto a single disc and 20 Mbps h.264 will still look pretty good.

Can't Burn Blu-Ray

I recently filmed a wedding, edited in Premiere CS5, and encoded to MPEG-Blu-Ray (.m2v files). I created a project in Encore CS5 and clicked Build when I was ready. After it built the menus, it tried to begin the burn. However, before it began, I received a "Blue-ray Error device not ready Code 3 note AS storage error -97060" message. There is hardly anything online about this. I have a Pioneer BDR-206 12x burner, and am using Verbatim 25GB BD-R discs. I also tried some Optical Quantum 25GB 4x discs, with the same error. I then updated the firmware of the burner. The project is only 14GB. I've heard that having long file names can sometimes mess things up, but all mine are less than 10 characters. I also tried building a blu-ray folder, and burning that in Nero 10, but still got the same results. My guess is that it's the burner, but I can successfully burn DVDs with it. I've also used the same verbatim discs successfully. I can't even do a disk error check in windows, because of a non-descriptive error. I wish there were more on this error in the manual. Any feedback would be appreciated!

Some reading that MAY help
As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems
To create a dual layer DVD (or BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
Odd Errors http://forums.adobe.com/thread/670174?tstart=0
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore "No Drive" Error http://forums.adobe.com/thread/569230?tstart=0
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941?tstart=0
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc (send the author a PayPal donation if you like his program)

TS4522 Trouble burning Blu-ray or disc image using Share

On version Final Cut Pro x 10.0.6, When I try to share to a DVD disc it tells me there is not enough space on the DVD disc , the project is 2:30 minutes, I put dual DVD .
After that just update on version Final Cut Pro x 10.0.8
I have a tried to burn to a Blu-Ray to the hard drive as a disc image using Share>Blu-ray. when trying to share Blu-Ray to the hard drive I get this error after a day of transcoding:
The operation couldn’t be completed. (DSPPublishing error -1024.)
I am using
Apple Mac Pro ,Mac OS X, Late 2008)
Version 10.7.5
Processor: 2 x 3 GHz Quad-Core Intel Xeon, Total 8 core.
Memory: 10 GB 667 MHZ DDR2 FB- DIMM
Graphic: ATI Radeon HD 5770 1024 MB
Please any one can help me for this trouble shut.

This may (or may not) be a separate issue – crashing rather than the DSP Publishing error.
Two suggestions – both relying on Digital Rebellion.
First use their Preference Manager to trash your preferences. Most of the crashes I've experienced over the past year of using FCPX have been remedied by trashing pref files.
Second, DR has a suite of utility apps called Pro Maintenance Tools. PMT has a crash analyzer that will provide both diagnostic info and recommendations. The suite isn't cheap, but there is a trial version you can download to evaluate.
Russ

Trouble burning Blu-ray image using share to Hard Drive or disc.

On version Final Cut Pro x 10.0.6, When I try to share to a DVD disc it tells me there is not enough space on the DVD disc , the project is 2:30 minutes, I put dual DVD .
After that just update on version Final Cut Pro x 10.0.8
I have a tried to burn to a Blu-Ray to the hard drive as a disc image using Share>Blu-ray. when trying to share Blu-Ray to the hard drive I get this error after a day of transcoding:
The operation couldn’t be completed. (DSPPublishing error -1024.)
I am using
Apple Mac Pro ,Mac OS X, Late 2008)
Version 10.7.5
Processor: 2 x 3 GHz Quad-Core Intel Xeon, Total 8 core.
Memory: 10 GB 667 MHZ DDR2 FB- DIMM
Graphic: ATI Radeon HD 5770 1024 MB
Please any one haw this problem that can help me for this trouble shut.

This is the error message I get. It's after FCP X is done with making the BMV folder and runs that disc burner app. There is about 850 gigs on the drive I want to save the disc image to, lots of space.
I thought maybe the drive the events was on was affecting this process, because it was full. I cleared out about 30 gigs and still got this message.
I never had any problems creating a Blu-ray disc image before. That's the optimcal way, IMHO, because you can burn the BD in Toast as the disc image and Toast won't reencode or do anything, it just burns the disc image and the disc has played on ever Blu-ray player I've tried it on.
Anyone have any more ideas?
Thanks

MacPro will burn dvds but won't burn blu-rays anymore?

I've been using Compressor (ver. 3) to burn blu-rays and dvds of my movie for several months just fine. A few days ago after opening my blu-ray project in Compressor it did the usual: tray opens and it says "Please insert blu-ray media…" I put a blank disk in (the same kind I've been using all along) and pushed the keyboard eject button to close the tray but it didn't move. I manually pushed the tray closed and I could hear it spin up several times and then it spit the disk back out. I repeated this several times with no luck. I tried different blu-ray media (didn't work). I tried burning a dvd and it DID work, so I'm thinking it's not the blu-ray drive. However I tried burning with Disk Utility and it wouldn't work. I also tried to make a blu-ray burn folder and it wouldn't work. It doesn't make sense that it can burn dvds but not blu-rays.
I'm not sure what else to do. I haven't upgraded (still on Lion). Would upgrading to Mavericks fix this? Everything's been working great so I didn't want to upgrade and mess it all up. I fear taking it to an Apple Store will cost more than purchasing a new blu-ray burner.
Any thoughts or advice? Thank you for your help!

Upgrade to Yosemite.

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

What do i need to burn blu-rays?

Hello everyone. I'm new to Final Cut Pro, and Macs in general, so please bare with me. I'm a film student, and recently purchased a Canon XH-A1s and a Mac Pro with Final Cut Pro 6 to jump start my video production business.
My only problem is that i only have the ability to produce HD video, so when it comes to distribution, DVD is really not an option. I've heard with an upgrade to Final Cut Pro 7 that you can finally burn Blu-Rays without a third party application, just wondering if that was true.
I was planning on upgrading to Final Cut Pro 7, and purchasing an external, USB Blu-Ray read/write drive. Should everything work ok if i go down that route?
Thanks everyone,
-Billy
Message was edited by: blakes2406

The Mac does not come with a Blu-ray burner. So you would be burning a Blu-ray compatible file to a standard DVD-5 or DVD-9. Neither of which are ideal for authoring Blu-ray content.
Do an exhaustive search online about Blu-ray authoring and disk creation. This is not something for the hobbyist video creator (and I say hobbyist in the sense that you're not creating thousands of copies for mass distribution, so no one take offense.)
Blu-ray is expensive and requires a lot of planning and prep to do it right. But you can't burn an official Blu-ray disc on a Mac as they stand. And, Compressor doesn't burn discs, it only creates files. DVD Studio Pro would be the app that would burn the Blu-ray disc, and DVDSP has not been upgraded since long before Blu-ray came on the scene.

Burning Blu-ray disks. Third party hardware needed?

I have read from earlier posts that it is not possible to burn Blu-ray© disks from DVDSP. Can third party hardware be purchased to burn such a disk having assembled the digital assets in DVDSP? Any recommendations?
Thanks in advance.
G5 Quad Desktop Mac OS X (10.4.8)

Thanks for your responses. I see that from DVD SP Late-Breaking news that'HD DVD projects authored by DVD SP 4.0.3 fully comply with the 1.0 version of he HD DVD specification...the new HD DVD standard. The disks will play on Apple DVD Player version 4.6.5 or later.
I haven't commited to the Blu-ray© player, just the Sony HD camcorder.
When the time comes, I will burn to a red laser disc per the Apple recommendation. And thanks for the Roxio link which makes it clear that a PC is needed for Blu-ray©
G5 Quad Desktop Mac OS X (10.4.8)

Trying to burn Blu-ray on Power PC G5

Similar Messages

Maybe you are looking for