TRYING TO BURN CDS AND COPY THEM

 WANT TO KNOW HOW CAN U COPY CDS AND BURN DVD ON MY LAPTOP. EVEN CALLED IN AND THEY TELL ME I HAVE TO PAY FOR THERE HELP CAN SOME ONE HELP ME PLEASE CAUSE THEY WEBSITE DON'T EVEN HELP ME THAT JUST S SHAME PLEASE HELP ME

Hi,
Here's one option you can use to copy and burn CDs or DVDs.
Download and install the free software ImgBurn.
The easiest way to then copy a Disc to a blank Disc is as follows.
1.  Create a Disc Image file of the CD/DVD you wish to copy on your PC - a guide to doing this is Here.
2.  Write this Disc Image to your blank CD/DVD - a guide to this is Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • My HP DVD-RAM GH40L SCSI DVD burner will burn CDs and DVD+Rs, but it will not burn DVD-Rs.

    I have only tried to burn CDs and DVD+Rs before, and both work fine, but when I tried to burn a DVD-R, it failed.  I put the same blank DVD-R in my HP notebook computer, and it burned it just fine.  This happened twice, so it is not the DVDs.  I uninstalled and reinstalled the burner with device manager, but still have the same problem.  Is there a firmware update or something that will fix this, or do I just have a defective burner?  Thanks!

    See This Older Discussion...
    Burning TV Shows/Movies

  • I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?

    I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
    wm0203

    Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.

  • Getting an unknown error when trying to burn cds!

    Ive had itunes for awhile, but now I'm getting an unknown error (261) when trying to burn cds from itunes. Ive upgraded to the latest itunes and have tried a few different types of blank discs but to no avail. Other than this error, the actual cdr drive seems to be working fine. Can anyone help? thanks

    trying to transfer over library from my old hp itunes to new powerbook. burned some of the songs onto cds as data instead of audio but once the playlist was burned it said unknown error -50. then when i put the cd in my mac the same thing came up and it wasnt recognized by itunes on the powerbook. AHHHH. help please. oh and also some of my songs from the cd then went into itunes if i dragged them but some didnt. both mp3 and m4a. and i want my purchased songs to transfer too

  • Error Code when trying to burn cds

    Hi
    i have tried to burn cds using my iMac but for the last while i have been getting the same error , "burning of the disc failed because communication to the disc drive failed. Error code 0x80020022"
    this error appears if i try to burn music cds or data cds ( documents/photos etc. ) . i searched through all the forums but i can't find a solution. i have tried using disk utility to repair permissions etc. but it says there all fine. i have tried changing cd brands but it doesn't make a difference. i can't use the hardware test on my installation cd because it just spins in the cd and then spits the cd out and just starts as normal yet when i put in a cd it reads it and asks if i want to import it into iTunes. i downloaded Onyx and let it do its thing but that didn't fix it. i also went looking but i can't find a firmware update for the cd drive on my mac. the cd drive in my mac is a "MATSHITA CD-RW CW-8124" . I was wondering if this was a common problem and how do i go about fixing it. one person told me that the cd burner would probably need to be replaced in order to fix this problem is that correct and is that costly . i'm at a loss to what else i can try so i would be very thankful for any help or information you could give to help me get this back working again. Thanks a million
    Paul

    Hi there,
    I am writing here as an "end-user" and not as a professional computer advisor, and because I've had some problems alike with my older iMac. I've written about my case in here:http://discussions.apple.com/thread.jspa?threadID=1832474&tstart=0
    I would also like to know if there are some procedures to do in OS X (I have 10.3.9) regularly to make sure that the internal cd-rw-drive burns without "having it's own opinion" and giving all kind's of stuped error-signals or even throwing-out the cd-rw's when ordered to burn them.
    I haven't figured out if there is a straight way to do this in OS X with the original Apple-applications. However, I've found a 3rd party freeware application called Burn X Free (1.5 (v1.5)) which at the moment seems to work and do the job of burning cd-rw's. Earlier I was able to burn them in Finder, after going from OS X 10.2.8 to 10.3.9 I begun to have burnig-problems, but might be that the origin of the problems is not the X 10.3.9. Anyway, with my user short experience of Burn X Free (1.5 (v1.5))-application I can recommend it if nothing else after all maintenance procedures works...
    However, I would like to know how you solved the problem after all.

  • I get "medium write error" when trying to burn cds

    I tried to burn a playlist from iTunes and it burned one copy, then when I tried to burn a second copy my computer made alot of noise during the "initializing/finishing" stage, spit the cd out and said "medium write error" - i've tried another cd, and tried burning another playlist with the same results. Any idea what's wrong or if there is anything I can do about it???
    Thanks

    First, try quitting all other applications except iTunes.
    Second, try burning at a slower rate.
    Then try a different brand/batch of CDs.
    I believe the default burn setting is 'as fast as possible'.
    Today I got perfect results at 20x or slower on my mid-2007 Core2Duo MacBook SuperDrive, and about 1 out of 3 at 24x and faster with a major brand name media labeled 'up to 52x'.
    Yeah, it takes a little more time to burn each disc, but if you only have a 50% success rate with a faster speed, you're not really saving any time.
    The reason I suggest quitting all other applications is that heavy CPU use seems to diminish my burn success rate on all of my computers, including the Windows boxes. Your mileage may vary.

  • Registry Settings for Itunes drivers for Importing and burning CDs and DVDs

    I have had this issue over and over again and re installed and uninstalled many times. Recently I upgraded to Windows 7 and for a very short time had no issues. I could burn CDS and back up and did not receive the error message on loading ITunes Setup Assistant "Warning The registry settings used by Itunes drivers for importing and burning cd's and dvd's are missing. This can happen as a result of installing other cd burning software. Pleae re install Itunes." Unfortunatley I then installed DVD Fab and this issued started again. I tried to restore my pc and uninstalled DVD fab and have no other burn software on my pc and still cant get working. I still get the same error when trying to burn a playlist "no disc recording found". Please advise what I need to do in lamen's terms. Much appreciated.

    have you followed instructions also on question number 11 and 12? because u told me that you have printed and i guess it only showed the words. ok. leave itunes installed and follow the >Registry instructions< also when you get to number 11 and 12 instructions, drop them down and follow them. and also follow the rest till it tells you to restart.

  • When I attempt to log on to I tunes I get the following message  "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing  This can happen as a result of installing other CD burning software  Please reinstall

    When I attempt to log on to I tunes I get the following message:
    "The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
      This can happen as a result of installing other CD burning software. Please re-install I Tunes."
    To my knowledge no new software has been installed.  I have tried un-installing and re-installing I Tunes but I still
    get the same message.
    Can anyone offer any suggestions?  Do I need to download a new driver?
    Bill Martin

    I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
    Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
    If so, here's the relevant instructions for that step:
    On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
    Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
    Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

  • I created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

    i created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

    Expanding and clarifying what BJD said;
    After you create the temporary sub-VI that BJD mentioned, open its front panel and copy the reference control that LV created when it created the sub-VI.
    This reference control will be correct class etc that you need. Use the control to replace the original control that you were attempting to wire up.
    The technique of "create sub-VI...copy" always works for me.
    There is one more thing that you should watch out for.
    The mechanical action of the boolean can not be set for latch action when attempting to read the value using a value property node.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • I just downloaded IOS 8 on my Iphone 5 and to do so i had to delete all my photos to clear space, but before so I selected all of them and copied them. Now were can i go to paste all 400 of them and get them back ?

    I just downloaded IOS 8 on my Iphone 5 and to do so i had to delete all my photos to clear space, but before so I selected all of them and copied them. The only place I can seem to be able to paste and see them is while making a new message in gmail and then when i tried to send them the message comes back blank and looks like below. what can i do to retrieve them?
    <Edited by Host>

    As razmee209 said, you can use iTunes to install photos on your phone from wherever you have them stored. Where did you copy them to? Are you saying you selected them on you phone and just hit "copy"? That would only copy one at a time to the "clipboard" so that you can paste it somewhere else. As you copy each one, the previous one is deleted from the clipboard. This is not a storage area. Did you back them up on your computer or in iCloud?

  • How to transfer files from my ipod classic to itunes on a new computer? I had itunes on my other computer. i bought cds and uploaded them to itunes there. Then everything was sync'd to my ipod.

    I had itunes on my other computer. i bought cds and uploaded them to itunes there. Then everything was sync'd to my ipod.
    now I have a new computer - andI want to transfer those files to my itunes.
    BUT I can only transfer music I bought through the Apple store.
    That's WRONG!
    I spent money on cds - yes I'm old fashioned.
    I want to listen to audiobooks on my CD so that's how they were recorded onto itunes and sync'd to my ipod.
    Now it's a waste if I press the sync button!
    I spent hours downloading cds to itunes on the other computer - which I will be getting rid of soon.
    Please help.

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • File permissions on burned CDs and DVDs

    When I burn CDs and DVDs, I often find that the permissions are set such that they are only readable by me. This causes a problem when I go to a Linux machine (or presumably another Mac) with a different login ID. (Interestingly, windows ignores these permissions.) If I remember, I can go in and change all the permissions through the Finder (or Terminal) before burning the CD, but I often forget. Is there a way in the burn process to make a disc universally readable?
    Thanks,

    Haven't tried scanning the discs since I myself don't have access to a Windows machine. I've tried various brands of discs but to no avail; one thing I've noticed though is that DVD+R discs seem to function every now and then but things with CDs and DVD-Rs aren't the same.
    Well, it's only 10 extra minutes to make the image and burn it so maybe I'll have to cope with it.

  • The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing

    Error on Itunes start-up.  Must click OK before Itunes will start.
    The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes.
    I have reinstalled iTunes using their complete uninstall instructions.
    iTunes does seem to work after OK is clicked, I'm just tired of having to hit OK.
    Other thoughts...  This started after the iTunes update required to go to IOS 6 for my devices.  I'm able to sync my devices. It is possible that ZoneAlarm (my Antivirus and Firewall) got in the way at install.  It flagged something and I denied it.  I was doing multiple things at the time and the flag did not have any indication about iTunes.  I have tried shutting down ZoneAlarm for the install and that has not helped either.
    Will try another full uninstall that includes uninstalling ZoneAlarm...

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • I am trying to burn CDs to an external hard drive to conserve space on our laptop. When I change the file location it says the folder on the external drive is invalid. Am I missing a step?

    I am trying to burn CDs to an external hard drive to conserve space on our laptop. When I change the file location it says the destination folder on the external drive is invalid. Am I missing a step?

    It does, but that's definitely strange.  Try showing all hidden files and folders on your Mac to see if that helps.
    To do this, head to Applications -> Utilties -> Terminal and type:
    defaults write com.apple.finder AppleShowAllFiles TRUE -> Press Enter
    killall Finder -> Press Enter
    Then navigate out to your iPod again via the Finder. Any luck now?
    B-rock

  • When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software. Please reinstall iTunes."

    When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software. Please reinstall iTunes."  I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility.  Any tips on removing this error message for good?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

Maybe you are looking for