Trying to capture hd video from camera

I normally transfer video into my computer via a transfer deck; however, my brother had a hd mini dv tape that he wanted transferred to dvd. He sent me out his camera and I tried taking the dv in/out from the deck and plugging it into the camera, but I 'm not able to transfer anything. Im sure I'm missing a step but don't know what. The camcorder is Canon HV20.
Any suggestions would certainly be appreciated.

Thank you, Tom! Looks like I got it to work by putting in different setting for the Easy Setup.
appreciate, as always, the fast response

Similar Messages

Problem capturing analog video from camera

i'm using FCP X version 10, trying to capture some hi-8 video from my camcorder through a hardware device called Dazzle* Hollywood DV Bridge.
when i open the Camera Import window, the analog footage displays successfully. however when Import, Stop Import, and Close, the footage does not appear as a Clip in my Event. It seems that the footage was not captured.
i experimented with capturing some footage in the Camera Import from Apple Built-in iSight. i followed the same steps as I did above, for the analog. with the iSight, however, the footage is successfully captures. it displays as a Clip in my Event.
why is FCP X capturing my iSight footage but not my Dazzle footage?

I'd kinda doubt FCPX supports that capture device. I'd suggest using the Dazzle's software to capture your footage instead and then drag the results into an event.

HT201302 Trying to download my videos from camera roll onto pc but auto play only says import pictures not import pictures and videos

Hi trying to download videos from my camera roll to my pc.pictures have all downloaded but not the videos

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

How Do I Change Video Output Quality When Capturing .DV Video From Camera?

I am experimenting with both this Premiere Elements 10 trial, as well as other brands of software, finding the best one to purchase for my needs.
In some other software, I not only indicate the source quality, but the output quality to the computer. If I want to upload the full quality video files to edit for retransferring back to a DV video tape, that's fine, but I will take up a lot of computer memory, relatively speaking. On the other hand, if I know that I'm going to be editing the video for replay on the computer or over the web, I can tell the program to upload to MPEG4 or some other conversion.
I am not seeing this as an option with the Premiere Elements. Can anyone tell me where, if possible, I can alter the output quality before the program begins the download? I certainly can find the input quality (such as .dv 4:3 ratio). I'd prefer not to always have to download the full quality video, THEN have to covert it as a separate step.
Thank you!

The PRE workflow is (1) Create your project (2) import your assets (3) sequence and edit your assets (4) create your menus (5) share your project.
The quality of intended output has no effect on your project settings which should match your source footage. Done this way optimises PRE's performance - as it can internally process far more effectively when matched to a 'native' format.
For standard definition the ideal format for PRE is DV-AVI Type 2. This is almost lossless and operates at around 13GB per hour.
Compression to an output format (e.g. DVD, or an iPod, or viewing online) is managed through the share process.
You could:
Import your footage - e.g AVCHD, HDV, DV-AVI, VOB
Share it to a compressed format - e.g. MP4
Delete the original capture source (in Step 1)
Work in a new project using the compressed output (in step 2).
But if you do this your final output quality will be lessened through working with a compressed original that you will then compress again. I can't see what you feel you will gain by this - disk space is so cheap now why wouldn't you want to give yourself the best quality source to work with.
Note that once you are finished with a project you can archive it off to free up your disk space.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Adobe Premiere Elements 13 stops working trying to add media via videos from camera

When I try to add media selecting videos from camera or flip, Adobe Premiere Elements 13 stops working and closes. What might be the problem?

elizabethmeow
On what computer operating system is your Premiere Elements 13 running? Have you had the opportunity to update 13 to 13.1 using an opened projects Help Menu/Update?
What are the full properties of your source media and how are you importing them that you are trying to import into the project? A quick way to get that information, if you do not know that information, is for you to post the brand/model/settings for the camera that recorded the video.
Do you have the latest version of QuickTime installed on your computer with Premiere Element 13, and are you running the program as Administrator?
Lots of additional questions, but the answers to the above may give us the answer that you need to resolve you issue.
Thank you.
ATR

Unable to properly capture HD video from miniDV tape in FCE

unable to capture HD video from miniDV tape
When I connect my Sony HDR-HC3 miniDV HDV camcorder to my iMac via firewire cable and use Final Cut Express to capture the video from the tape, I do not get a Capture window that allows me to specify in and out points, I just get a playback window that immediately starts capturing and the only option I have in this window is hit ESC to stop capturing. If I let this capture window continue to capture the video from the camera with miniDV HD tape, then the entire tape would be captured as one massive single video clip.
QUESTION: Is there something I change or do to make the proper capture window appear where I can specify in and out points to capture from tape for each clip?
NOTE: using same camera and tape with iMovie with automatic capture enabled, all the clips get captured properly. I also tried to use the manual setting in iMovie and it worked too.
More details(read only if you want more information)
I have a several miniDV tapes containing HD video created on a Sony Sony HDR-HC5 and Sony HDR-HC7. Unfortunately, both these camera were stolen, and I have since moved to a camera that uses flash memory, not tape. However, I need to get the video footage off these tapes, so I bought a used Sony HDR-HC3, it plays the HD miniDV tapes just fine and iMovie reads the video from this camera just fine, but Final Cut Express does not.
When I setup Final Cut Express, I used the Easy Setup and specified:
Format: HD
Rate: 29.97 fps
Use: HDV-Apple Intermediate Codec 1080i60
These setting match those of the camera and recorded tape. If I use any other settings but these, then Final Cut Express never sees the camera and never opens any capture window at all. Using Quicktime 10 movie inspector on the clips captured by iMovie from same camera, all the clips match this setting too.
Final Cut Express version 4.0.1
iMovie 09 Version 8.0.2 (821)
iMac 2.93 GHz Intel Core 2 Duo with 4GB 1067 MHz DDR3 running
Mac OS X Version 10.6.4
My Final Cut Express scratch disk is a Seagate 2TB external USB 2.0 Hard Drive that has been formatted to be Mac OS Extended (Journaled). This external disk is also where iMovie successfully captured all the video from the same camera.

Thanks for the answer. It makes me sad. I thought using Final Cut Express would be an upgrade to a more robust editing system from iMovie, yet iMovie does a superior job of logging and capturing video from HDV video on miniDV tape in comparison to FCE. Not only does iMovie capture each clip on the tape into it's own video file automatically, it also includes timestamp information in the filename indicating when the clip was originally recorded, which appears to be something that is missing from Final Cut Express. Now I realize that HDV miniDV cameras had a relatively short life span in the consumer marketplace and have since all been replaced by flash and hard drive based AVCHD cameras, but from circa 2004 to 2007, miniDV HDV camcorders were very popular and I am sure there are lots of consumers that must be super frustrated by Final Cut Express limited ability to log and capture clips properly from these cameras.
Assuming I do not want to make a rough cut of video in iMovie and prefer to begin my editing project in Final Cut Express (not doing XML export of iMovie project), I need to determine the best way to get clips captured via iMovie into Final Cut Express and determine if there is anything inferior in the iMovie captured clips that I need to be aware of. So far it appears that both iMovie and Final Cut Express reduce the 5.1 surround sound captured on the HDV miniDV tapes to stereo sound, which is not a big lose given the 5.1 sound was recorded from camera's built-in microphone, but it makes me wonder if the video is reduced in any way by the iMovie import process, examining the video in quicktime's inspector window the video appears to be the same in both iMovie and FCE, but I'll research the answers to these questions elsewhere on this forum and post additional questions if I do not find the information I need.

Can I capture the video from the TV card or video capture card to publish

Can I capture the video from the TV card or video capture card to publish?
I tried to use the USB camera, it's OK. But, will the TV card or video capture card also work?

Hi,
iChat will set up a Video chat window that takes in to account your Processor speed and Internet Speed and to some extent the Buddy's speed.
This then denotes the pixel content of each frame.
OS X 10.6.x tells me this is iChat 5 which in turn mean you have at least an Intel Core 2 Duo Processor.
This should be capable of 30 frames a sec at about 640 X 480 pixels (Check the Connection Doctor (Video Menu) and the Statistics tab during a Chat).
iChat 5 cannot do HD (Max of 4:3 ratio at the above figures)
After that it depends how you are recording the chat.
Quicktime X would do it.
iChat will do it itself (if the Buddy agrees)
10:14 PM Wednesday; February 1, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have Mac pro and firefox 3.0.19.I am trying to download a video from youtube.? I can see the video. I want to download it and save in my computer to see it again. I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me t

I have mac pro and firefox 3.0.19
I am trying to download a video from youtube.?
I can see the video. I want to download it and save in my computer to see it again.
I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
== This happened ==
Every time Firefox opened
== I want to download a video from youtube

No, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

I am trying to play some videos from the internet and I get the message missing plug in. I click on "missing plug in" and download adobe flash player. When i try to log in again to play videos, I still get the message missing plug in. Any suggestions?

I am trying to play some videos from the internet and I get the message "missing plug in". I click on the message and downlaod adobe flash player as prompted. When I log in again to play the videos, I still get the missing plug in message. Any suggestions??

that used to happen to me all the time! I would recommend going to a different sight or attempting to download it again ( you may have missed a step it can be tricky).

I am not able to change photo to video from Camera mode. The same problem is occurred now with iPhone. What is a problem?

I am not able to change photo to video from Camera mode. The same problem is occurred now with iPhone. What is a problem?

Ahhhh... didn't know this with iOS 7. Thank you so much.

How to export video from camera to ipad

How to export video from camera to ipad

Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
 Cheers, Tom

Can't get video from camera update / suggestions?

As I think others have reported, I have lost my ability to participate in iChat AV video sessions, and any attempt produces a "can't get video from camera" error message. I am running OS 10.4.5.
I have an extra internal hard drive with no OS on it, so I did a clean install of Mac OS 10.4 and iChat was back to working. I then applied all the Apple Software Updates to bring it up to 10.4.5 as well as any othe Security Updates and such, and it is still working OK as long as I boot off that OS.
This tells me the problem cannot be in my Router or DSM Modem, I think.
In the past, I have had ShowMacster and iGlasses installed on my original system, but I believe that I have uninstalled both of those properly. Still does not work.
I DO have Apple Remote Desktop - Admin installed on this startup volume, and I cannot say for sure whether the problem may have started around the time I installed it. It's possible, I just wasn't keeping chronological records of installs back then.
So, the GOOD news is that I can participate in any iChat AV session I want to be in as long as I have prior notice or enough time to reboot my G5 PowerMac under my second drive, but I still can't keep iChat AV open on my main drive and expect to be able to respond to impromptu invites to a video session.
I thought I may have read that Apple Remote Desktop can create a conflict. If anyone knows, I would be all ears! Thanks for any suggestions.
Jim Foster
Hampton, Ontario, Canada
Dual 1.8 Mhz G5 PowerMac Mac OS X (10.4.5)

I believe I have solved the mystery of why I was getting the "can't get video from camera" error message. I had said earlier that I had Apple Remote Desktop (admin) loaded on my Mac but that I did not normally have this application open. What I failed to realize, though, was that for some reason I also had Apple Remote Desktop set to ON in my Sharing System Preferences pane. All I had to do was to uncheck this box and my ability to carry on video chats returned.
I expect that somehow in the process of installing and running the Apple Remote Desktop application to access another Macintosh on my home network, I must have either manually or automatically caused Apple Remote Desktop to be turned ON as if I was wanting to allow some other Admin user to connect to my Mac. Doesn't make much sense to me, but I am happy with the solution.
Jim Foster
1.89 Mhz dual G5 PowerMac Mac OS X (10.4.5)

HT1766 lost my iphone and can't find photos and videos from camera roll on my computer. where are they?

lost my iphone and can't find photos and videos from camera roll on my computer. where are they?
thanks

Where did you put them?
These are not part of the sync process at all, as the manual tells you. You should be importing them to your comptuer regularly as you would with any digital camera.

I move my videos from camera roll to a new folder. After i turn off & on my phone, the videos disappears. The videos are very important to me. Please please help. how can i retrieve?

i move my videos from camera roll to a new folder. after turn off & on again my phone, the videos disappears. the videos are very important to me. Is there any way i can retrieve it? please please help. thanks.

Photo Stream is not a backup.
Photo Stream has a limit so is temporary.
iTunes does not handle the import of photos/videos from any digital camera including from the iPhone's Camera Roll.
Photos/videos in the Camera Roll can be imported by your computer as with any other digital camera.

Found an error related to "can't get video from Camera"

So, I am back with the same issue: it is now 3-4 months I can't Video chat because iChat AV tells me "can't get video from camera". I disable the firewall (for the test), I forwarded nearly ALL the TCP and UDP packets from my router to the mac, I stopped any application such as PostgreSQL or others which might interfeer. I checked I didn't have any strange firewall rules still on even when switched of from UserPreferences (sudo ipfw list)...
Well, I can see myself with the camera but it won't get the image of the party I am connecting to. So... I looked in the console and:
2006-03-04 19:09:14.926 iChat[9245] WARNING: Freeze-frame failed: couldn't get local buffer for layer Local!
Each time, this is the message.
I did the downgrade Quicktime test I also reinstalled the combined update... nothing worked.
It seems CRAZY that nobody at Apple can at least tell me WHERE to have a look. After all the message is not very clear. Where is the problem? My mac, my router, iChat?
I filed a bug BTW... because it DID work in the past and now stoped working, so my netgear router can't be in fault (I also checked the logs of the router and of the firewall... nothing seemed to be stoped)
Alex

Hi Alexander,
Defcom aslo has a Netgear And I will let him come back on that side.
On the error front iChat has about 4 standard messages.
1) User did not Respond.
2) Insufficient Bandwidth.
3) Can not get Video from Camera
4) Did not get data for 10 secs
Unfortunately the causes can overlap, hence the lack of Ahaa !!
The most common feature of all of them is something to do with the way the routing devices are set up.
This leads us to start with the LAN set up,
The ports that are open,
the method used to open them,
Whether DHCP is being used with Port Forwarding as the IP can change to your computer and the Port Forwarding point to the "wrong" IP
How many devices are in the link to the Internet ?
IF you are doing NAT (Port Forwarding or Port Triggering) ?
Whether your ISP has started dong NAT to your service
Whether they offer a SIP based Service like VoIP phones.
11:29 PM Monday; March 6, 2006

Trying to capture hd video from camera

Similar Messages

Maybe you are looking for