Trying to change NAT connection from moderate NAT connection to an open NAT connection for XBOX LIVE

Hi, I have a Linksys Wireless-N Broadband Router/WRT160Nv2 and I have been trying to change my NAT connection from a moderate NAT connection to a open NAT connection for my Xbox Live on my Xbox 360. I can sign into my Xbox Live account but it is working on a moderate NAT connection. I have already enabled the UPnP and put in the proper port numbers. After doing that I signed into my Xbox Live on my Xbox 360 and tested my Xbox Live connection and still it says that I a moderate NAT connection. I do not know what elso to do and I would greatly appreciate step by step help from anybody who knows what they are doing. PLEASE HELP ME AS SOON AS POSSIBLE!!!!
Thank you

A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Here is the link, which will you in resolving the concern: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

Similar Messages

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Mac OS X 10.6 Help: Sharing your Internet connection

Opening NAT settings for Xbox

So recently I tried opening NAT settings so I could use my Xbox Live more efficiently. Unfortunately, I know nothing about computer networking. Is there anything I can do to get this up and working?

Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
The following web blog does a great job explaining the NAT issues with Xbox Live! Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
Option 1 - Create a DMZ
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT
Enable default host at: <Enter the IP Address for the XBox>
Option 2 - Configure Port Mapping
The following ports must be available for Xbox Live to operate correctly:
UDP 88
UDP 3074
TCP 3074
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the Xbox 360.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
Click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
IPv4 Address: <enter the desired Private IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT > Configure Port Mappings
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): 88, 3074
Public TCP Port(s): 3074
Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
Private UDP Port(s): 88, 3074
Private TCP Port(s): 3074
Click "Continue"

Trying to change my region from uk to New Zealand but comes up with incomplete pass how can I get round this ?

Trying to change my region from uk to New Zealand but comes up with incomplete pass how can I get round this ?

Thanks for the Clarification...
GlenieBoy wrote:
... method of payment is not valid in this iTunes Store as it's set to uk..?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

HT1918 I am trying to change my country from Australia to Canada however it says that I can't as a I have an incomplete season pass for a tv show. However that season pass is actually complete.

I am trying to change my country from Australia to Canada however when I try to it says that I have an incomplete season pass however the season pass is actually complete. Can anyone help please? It's driving me bonkers!

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store and request assistance.
Regards.

I am trying to change my country from South Africa to Uk. I change my address on my id. When I sign into apple store, it asks me to verify the address details. It then comes up with invalid post code. All that works is the SA post code, not any UK code

I am trying to change my country from South Afrika to UK. I went into change ID, chose UK flag, changed everything to the new address. Logged into Apple Store, then got a message to verify account. Tells me invalid post code. Will not take anything else except my SA postcode. Then Apple store reverts back to Soth Africa and not UK

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

WRT54GS V7 NAT TO OPEN, HOW? For xbox 360 live

I recently got a new modem DSL modem so I had to re start my wireless Linksys router settings to factory default. I use AT&T DSL.
I got my network all set up again and can connect to Xbox Live fine. My desktop has the DSL modem and router plugged into it. Thats in another room. Im in my room on my laptop, with my Xbox 360 next to me. I used to plug the ethernet cable from the 360 to my laptop, and I could get online fine.
But once I connected today, it said my NAT was set to Strict.
How can I set my NAT to open, or even Moderate. Because as of right now, I cant really join ANY games online at all. (I tried with Call of Duty Modern Warfare 2)
Thanks

As you have DSL modem,you need to convert the modem into the bridge mode to make your X-Box working.

ANYONE trying to connect to Xbox Live w/ GT704WGB PLEASE READ!!!!

I have been having issues connecting to xbox live all week. Just got new phone/interent service set up monday(2-22-10) Could not connect to Xbox live, wired or wireless, but had not problem connecting wirelessly w/ laptop. the xbox first said NAT set to moderate and to disable UPnP, after that was fixed it said MTU insufficient and had to be set to 1364 or higher(let me save you the trouble of looking its already set to 1492 by default)
Contacted Verizon about this issue several times, along w/ intermittent calls to xbox tech support and even actiontec, until verizon finally got me to buy the premium tech support. Take my advice SAVE your money!!!! They did not fix my problem whatsoever. Actiontec finally told me that it was my equipment, so I contacted Verizon and after fighting w/ TS agents then finally after 2 hrs got what I wanted by talking to supervisor and she had them send me a new gateway. but after I got the new gateway, I set it up and had the same issue (so I guess it was not the equipment afterall).
I did everystep the tech support people had done in the days past and still no connection. If you have had this trouble as well, let me save you the headache of hours on the phone w/ tech support people who are dumber than dirt(i spent a total of over 10hrs in 3 days on phone w/ various TS agents).
If your actiontec gateway has been messed w/ in anyform or fashion, and connects wireless (or wired) just fine to other devices(PC Wii etc) w/o any modification to gateway, try this:
RESET the gateway to factory settings(press the little red button on the back of the gateway w/ a pen or small object.
after all the lights have come back on, go to the gateway site to modify it (enter 192.168.1.1 then hit enter) username is admin and password is password, by default.
Go to Security, click on DMZ Hosting, click" on" and make sure it is for Xbox 360 not for your PC under DMZ Host PC Name
Run a "Test live connection"? on xbox360 and it should connect to Xbox Live

So glad to hear that I could help. No one should have to deal with all the stress and frustration that I had to endure just to get their xbox to connect. Its so incredibly frustrating to find out at the end that It is such an easy fix.

Amazon Q&A - E3200 - Default Nat Type for xbox 360 and ps3

Date: Sep 5, 2012 4:08:21 PM PDT
Linksys E3200 High-Performance Simultaneous Dual-Band Wireless-N Router
the nat type for xbox 360 and ps3, what is it when you set the router up out of the box? are the nat types open moderate or strict

Hi there. It actually depends if the gaming consoles ports are not blocked by your ISP. Moderate NAT type limits your connection playing online games, Strict does not allow you any connection at all while Open allows you to play with everyone online. Have you had a router before with Open NAT on the gaming consoles? Try to check without the router by going directly to the modem and see if your NAT type is open or strict or moderate. If ever modem is fine and it is the router not working right you can port forward ports on the router. I found these usual ports online, for XBOX live:TCP and UDP ports: 80-88, 3074-3074, 4267-4269. For PS380, 443, 3478, 3479, 3480, 5223, 8080 and UDP: 3478, 3479.
Setting up port range forwarding on Linksys wireless-N routers and gateways
Resolving NAT type issues with gaming consoles through a Linksys router
PS3
Setting up an Xbox 360® behind a Linksys Wireless-N router

Trying to connect to xbox live using my home network, I need help.

I have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that. If anyone could tell me what the problem is and hopefully how to fix it, it would be much appreciated.

u might to open port numbers 88 and 234 on your router
here's how to open ports
1: open IE and on the address bar, type in 192.168.1.1 and hit enter
           USERNAME: ( leave it blank )
           PASSWORD: admin ( all in lowercases )
2: click on the tab " applications and gaming "  then click on the SUBTAB port triggering.
3: you can just name the application like, box or whatever and fill in 88 for each of the boxes in the first line
4: same goes to application number 2 but you have to put 2304 for each of the boxes and pls do not forget to enable it, then save settings
5: Teset the xbox if it's now working.
6: if still not working, go to the SECURITY tab and uncheck the bock that says, " block anonymous internet requests and save settings.
7: teset xboox agan and if it still won't work
8: go to the SET UP tab and look for MTU.
9: set it to manual and lower down the size by 10.( by default, it's 1500. )→ save settings.
          Hope it will help. goodluck!

Upgraded to extreme and can no longer connect to xbox live

My old airport express died so yesterday I bought an airport extreme to replace it. I had no problems setting it up, my powerbook and powermac connect to the internet just fine. My ps3, wii, and apple tv all connect fine. However I lost the ability to connect to xbox live with my xbox360. Running the "Test Xbox Live Connection" test shows that it passes all the tests and is connected to the internet until it reaches the xbox live test where it fails. According to xbox support there are no current outages or problems with my account.
Since the only thing which has recently changed is the upgrade from airport express to an extreme it seems like that is likely the problem. I thought it might be a NAT or port thing but in the airport setup utility there are no options for changing either NAT or port settings.
Any ideas anyone? It looks like a year ago when the extreme came out there were problems between it and the xbox, but it also looks like they were resolved. Also they caused the xbox not to be able to connect to the network at all, which mine can do.
Thanks very much for any ideas or help. Otherwise the extreme is going to have to go back.

That's a drag.
I wish I could be more help, but I can not think of what the problem would be. I have mine connected to a network that bridges two AEBS to allow for a large area WIFI. I have no problems with either of the 360's connected. I have no special port forwarding or any settings changed to get the connection.
I also know that since I just replaced my main base station for an unrelated problem, that it worked out of the box both times.
I would say try direct connecting it. (the xbox) Not necessarily to correct the problem, but to isolate the AEBS as the problem. I would also try shutting down anything else that may be connecting so you only have a connection with your xbox. Again, none of this will probably solve your issue.... but you can get in contact with customer care or visit a genius bar.
In my experience if you can give detailed results to test you have already performed to trouble shoot, they are very receptive to replacing your product. Isolating the AEBS and saying you know t will connect direct, and that even when it is the only device connected.... it fails. I would also try both wireless and wired if you have both options.
I know it is not the optimal answer.... probably a pain.... but sometimes things just work kinda goofy. I know the stuff works and works great when it does... but I have had my share of issues with apple hardware. The good news is they have never failed me when it comes to taking care of it.
Good Luck !!!
Message was edited by: Dan Jay - Minneapolis

How to connect to Xbox Live with the Actiontek GT704-WGB wireless router

If the title got you here, then you are probably a Verizon DSL customer who is trying to connect your Xbox to Xbox Live with the Actiontek GT704-WGB wireless router and are getting nothing but errors saying, "your NAT is set too high", or, "Your MTU setting is too low", etc. Well, after many calls to Xbox support, Actiontek support, and Verizon support, I finally came up with the solution myself.
All that is needed is a little techie know-how about router settings and you'll do just fine! However, if you are uncomfortable with doing it yourself (and it is really really easy to do!) then you can call Verizon support and have a tech support rep remotely conntect to your PC and make the changes for you: however, you have to speak with someone in advanced tech support and to do that you have to agree to a 1 year support contract to the tune of $14.95 per month in order for them to do it! Scam??? You be the judge!
So, here are the steps to take to get it working and by the way, YOU CAN NOT GET THE XBOX TO CONNECT TO THIS ROUTER WIRELESSLY!! YOU MUST CONNECT YOUR XBOX TO THE ROUTER WITH AN ETHERNET CABLE IN ORDER FOR THIS TO WORK!!! If you don't heed this warning, you will unfortunatly go through all the steps below, only to find that you get the same errors but, ethernet is faster than wireless so it's better!....right?.....right? (hears crickets chirping)....right? Oh well, I tried! Also, you must have your Xbox on in order to change the router settings (which you'll see why later) Anyway, here's the steps:
1) On your PC, open a browser window and type in the address bar: 192.168.1.1 and press enter.
2) You will then see the interface on which you will make changes to the router's settings. If at any time you are prompted for a username and password (which should happen right after you press enter) the defaults are: username: admin password: password. If you have changed these, enter what you changed them to.
3)Click on the icon on the top labelled "Advanced Setup"
4)In the left section, click "WAN IP Address"
5)At the warning screen, click "yes"
6)Scroll down until you see "MTU setting" and enter 1370. NOTElease don't be tempted to either enter 1500 or leaving it at 1500 (which is the default) because you might know that 1500 is the maximum at which this can be set which is TOO HIGH AND WILL NOT WORK! Trust me and enter 1370 and then click on "apply"
7)Click on the top icon labelled "Security"
8)In the left column, click on "applications". This is where we are going to open the 3 ports that Xbox Live uses to communicate with your Xbox.
9)In the drop down box labelled "PC Name" select "Xbox 360". This is why you had to have your console on and connected cuz if you didn't, it would not show up on the drop down list!
10)Under "category" click on the bubble next to "user"
11)Click on "New" which is one of the blue buttons near the bottom.
12)As for the rule name, I entered "Xbox" but you can put whatever you want but I'd use that so you know it's the ports you opened for the console.
13)For protocol, select TCP. (Yes you will also open the same ports for UDP but for some reason if you select TCP.UDP instead of doing them seperatly it doesn't work.....I dunno why!?
14)For all 3 "Port start", "Port End", and "Port Map Start" put the # 80.
15)Click "apply"
16)Now, select UDP and put the same port # 80 and again click "apply"
17)Repeat steps 13 through 16 except with the numbers 3074 and 53, clicking apply after each one. What you should have now on the bottom are a list of all the ports you opened, one TCP and one UDP for each number totalling 6 entries.
18)Click "back" to return to the Applications screen.
19)If you have to, select Xbox 360 for PC name, and click the bubble next to "user" and you'll now see the entry called "Xbox" or whatever you called it.
20)Click that entry to highlight it and then click the blue "add" button to the left and then click "apply" at the bottom.
21)Close the browser screen and turn off your PC and Xbox and any other hardware connected to the router.
22)Turn the router off and unplug it and wait about 5 minutes. It can take this long for any residual current in the router to dissapate and for the NAT table to clear itself.
23)Turn on the router and wait for the internet light to come on green meaning the router has booted and has an internet connection.
24)Turn on the Xbox AND ONLY THE XBOX!
25)There is no need to go into network setting as when the Xbox is connected by ethernet, it automatically configures and connects intself. You can, however go into network settings and perform a connection test but this to is not necessary.
You now should be able to connect to Xbox Live! If not, you've done something wrong and must either go through all the steps again or let Verizon do it for you (for a fee that is).

I followed jtktlw's instructions to the letter. Problem was I had already enabled UPnP before doing so. Afterward I disabled UPnP and rebooted....no change. I reset the MTU to 1500...boom, it works. Seems for me all I needed was to open the right ports to get it to work.

Unable to Connect to Xbox Live on Xbox One due to ...

I have been on the phone for a few hours this afternoon trying to get this sorted and the conclusion of my last call to BT was that I needed to register on a tech experts website? Put simply, I need to open a list of seven ports that are listed here:
http://support.xbox.com/en-GB/xbox-one/networking/network-ports-used-xbox-live
in ordder to be able to connect to Xbox Live with my Xbox One, this is an issue I have had since upgrading to infinity.
Can somebody do it for me, I have the IP address of my Xbox One, or can somebosy point me in the right direction?
It seems to be taking a very long time to get sorted.
Thanks in advance.

Think I can help here.
First of all I assume that you have disabled UPNP on the hub? If you havent yet then you have two choices:
You can disconnect the Xbox One and 360 from the network, perform a full factory reset of the hub and then immediately disable UPNP before doing anything else, or..
Disable UPNP and wait a good few hours (I'm talking overnight here) before reconnecting the XBox One and 360 and trying again.
When UPNP is enabled and the XBoxes are using the network it will write rules on the fly to the NAT table, you probably won't be able to apply port forwarding rules to a device for those ports because the Hub can see that they're already in the NAT table. They will eventually expire but this can take some time. When you disable UPNP, these rules don't seem to be removed as you might expect.
Next, you definitely don't need to forward ports 80 or 53, these are allowed by the hub automatically and traffic for each will be correctly forwarded to whatever device by the hub. You shouldn't need to open 88 either.
You have an XB One and a 360 and they both can't share the same port, that being 3074. However, if the 360 is using 3074 you can forward 3076 to the XB One instead, or vice versa.
When you've applied all of your port forwarding rules run the XBox network test repeatedly until it gives you an open NAT, a maximum of six times should do it, and you may want to do this every time you turn on an XBox. I've previously posted about why I think you have to do this sometimes with the BT Home Hubs.
If you're still not getting an Open Nat, turn off the XBox and unplug any powerline adapters on its chain for 5 minutes, then reconnect the adapters in sequence from the hub and try again.

New Fios G1100 and Multiple Xboxs Connected to xbox live issues.

I just upgraded my router from the Actiontec MI424WR to the G1100. Now I am into an issue with Fios keeping a connection to xbox live on selected xbox devices. I have 3 xbox 360 and 2 xbox one connecting to the network. Both Xbox One maintain solid connection to live, but the 360 experience I have a totally different experience. My set up has 1 Xbox One Wired, 1 wireless. I have 2 xbox 360 wireless and 1 wired. I am also experiencing problems with one of my desktops which is wired that randomly loses a connection to internet. I been using this TRENDnet 8-Port 10/100Mbps GREENnet Switch (TE100-S80G) to help with wired connections. Both Xbox Ones on the network remain connected at all times, or at least I haven't seen a drop. My experience with my xbox 360s are completely different from my Xbox One.They all drop connection randomly every 5 to 20 min. I can immediately sign back in , but this continuosly happens. I was able to get one xbox 360 to maintain a continuous connection by putting it IP address and enabling DMZ on it. I have tried port forwarding but that doesn't work. Anybody have any suggestions or solution? Or should I just shipped back the G1100 and go back to Actiontec MI424WR.

Who is your ISP...?
Are you getting any error message...?
Try the following settings and check..
Open the router setup page,On the set-up tab change the MTU Size to 1365 and click Save Settings...Click on "Administration" tab and disable the option UPnP and click Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox
Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Connecting to Xbox Live using a Macbook Air?

Okay, so i've had my Macbook Air about a month now and I wanted to use it to connect to xbox live just like I did when I had windows. I bought one of the adapters as the macbook air doesn't have a ethernet port and I have tried a lot of the tutorials and walkthroughs that other people have posted but they all seem to be froma few years ago and don't work for me. If there is anyone that could give me some help I would really appreciate it.
I am also using OS X Mavericks 10.9.2.

Hello BURL3YY,
After reviewing your post, I have located an article that can help in this situation. It contains a number of steps and helpful advice concerning connection sharing:
OS X Mavericks: Share your Internet connection
http://support.apple.com/kb/PH13855
This is a very useful tool and I have used it myself to connect consoles to play games online. Have fun!
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Trying to change NAT connection from moderate NAT connection to an open NAT connection for XBOX LIVE

Similar Messages

Maybe you are looking for