Trying to change the view in a keynote presentqtion from horizontal to vertical...

changing a keynote slide from horizontal to vertical

Open the Inspector, select the icon on the left to show the Document pane, then look towards the bottom of that pane to see Slide Size. Selecting that will show several options, choose the one at the bottom Custom slide size... Now, all you have to do is swap the number on the left with the number on the right (in my case, put 768 in for Width and 1024 in for Height) and now you have a vertical presentation. A lot of the template graphics may not look as good in this layout BUT if you use a template like white or black (or any other templates without a lot of images) you should be able to work with it without too much reworking of the template objects.

Similar Messages

Trying to change the cache size of FF3.6 from 75meg to a larger size, it only applies on a per session basis. i check the about:config and the changes have applied but when i restart FF it has reset itself to 75 :(

as per the question, tried to up the cache from 75meg to 300meg but it resets after i restart firefox, have tried to change to various cache sizes but to no avail.
-=EDIT=-
it must be something to do with the profile, as when i set up a new profile in the manager, the cache size problem no longer appears. but now, how to repair my profile

ok, nothing in that text file helped but the original file that it was based on pointed me in the direction that it might be an extension. The only extensions i have are NoScript and FasterFox Lite version....
I have now traced the fault to lie with FasterFox... if you are not familiar with fasterfox it speeds up internet connections in firefox... several of the options are presets... but when i selected custom it gave me the option of a cache setting, which was set to 75megs.
I have now changed that cache setting in fasterfox to 300 Megs and it is now persistant in firefox on restart.
hopefully this information will be helpful to other people in the future that suffer the same problem.
Thanks for your help TonyE, its greatly appreciated

How can I change the view in Show Page Source from one long line to a more readable view

When using Develop --> Show Page Source in Safari 6.0.1 I get a view of the html that is just one long line. I can scroll along to the right but it is not very easy to use.
It seems to me that when I first used this feature I had a formatted view, that is the text was broken into separate lines and was easier to read.
But I think I clicked on something and it change to one line. I can't find a way to change it back.
Is anyone familiar with this? Or can point me to more information about Show Page Source formatting?
Thanks.

Oh, I see the problem.
The one long line view only occurs when I'm viewing a page locally on my own computer. (When I choose Show Page Source for any page on the internet the display is formatted normally.)
So obviously if I want to see the code in my own files I can just go open them in the text editor. I used to use View Page Source (previous version of Safari) as a shortcut for a quick peek. If there is a solution to this formatting thing for local files I'd love to know it, otherwise I'll just put it on the you-can't-do-that-anymore list.

How Do I Change the Background Color in Keynote?

Hello! I am trying to change the background color in Keynote, I can see where I should be able to do this, however my computer does not let me. If I change the template (in the Fun template from the standard to the horizontal picture) it will let me change it only in the box rather than the entire template. I really want to keep the style, just not the orange color. Thanks!

Ruth, the background in Fun is an image, not just a colour. For the templates without photo cutouts, you will need to select the template, go into the Inspector, choose Slide, select the Appearance tab, and then in the background section you can change the image. If you just want to change the colour, you can choose Tinted Image Fill in the dropdown menu, then click the colour box to control the tint.
Unfortunately, changing the Photo template is much more difficult, since the "background" image is actually a cutout placed on the slide above the actual background. As far as I know, changing this image will require access to fairly sophisticated graphics programs, such as Photoshop. However, if you are using Keynote 3, an alternative would be to create an image mask that is similar in shape to the cutout, as this would produce the same effect (cutouts are not nearly as vital now that images can be masked to a shape).
PowerMac G5 Mac OS X (10.4.4)

Trying to change the labels for some UI elements

hi,
Problem: I am trying to change the labels for some UI elements and transport the views from one server to another server.
the lables show changed in the source server but the changes dont reflect in the destination server
Kidly help me to slove this problem

Hi Sharad
The process is as explained:
1.     Firstly, go to the respective view, and to the Label and then delete the Label Text as
                mentioned in the attribute u2018TEXTu2019 of the Label in the view.
2.     Next, Activate the View, if it asks for a change request, please assign it to a new TR.
3.     Finally give the Label text again and then Save it and activate it.
4.     Further transport the request to ECP and find the difference.
This especially happens when we frequently change the WD Component and embedd it entirely in the Transport.
I hope this information would be of a great help to all of us.
Ponts if helpful.
Regards
Roshan

Trying to change the Release/Debug connection string (ORACLE) of a VS13 Lightswitch project. Getting ORA-00942 error...

Hello,
i try to change the connection string of a Lightswitch 2013 project. I have a database for developers and a 'productive' database for releases. Both are similar (table names, entries etc..) and they are from ORACLE. First i attached the developer database
as an external source. Everything works fine. Now I'm trying to change the connection string whether my application is in a release state or in a developer state.
I found a hint in the following question to solve that issue: Question
from a LS-User
It is possible to change the connection string during the runtime. I tried it out and added to my DataBaseService.lsml.cs:
partial void DataBase_InitializingConnection(DatabaseConnectionState state)
state.ConnectionString = "DATA SOURCE=DB.productive;PASSWORD=password;PERSIST SECURITY INFO=True;USER ID=USER_PROD";
Well, Lightswitch is using the new connection. But when i run the application, i am getting the error "ORA-00942: table or view does not exist". The views and tables definitely exist. The two schemas are the same. So what am i doing wrong?
Regards from Munich

HI Munich,
Welcome to Lightswitch forum.
According to your description above, you want to connect to external datasource in Lightswitch application.
Oracle is not a supported data source for LightSwitch, it's recommended to use SQL Server database.
If you want to change the connection string, you can update the connection string for a data source using the data source wizard. For example in VS2013:
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have a list a and want to use (CSR) Jslink to change the view but multiple fields

I have a list but want to use CSR - jslink to change the view of multiple fields. Can a jslink have multiple fields to change. Looking at the samples
here
Would like to merge 2 or 3 script in one to do multiple things. Is this a best practice?
Thanks in Advance
Code snippet here below(tried this but not working for me.Sure im missing something): Trying to combine the prioritycolor and percentagecomplete together but not working
// Create object that have the context information about the field that we want to change it's output render
var fieldsContext= {};
fieldsContext.Templates = {};
fieldsContext.Templates.Fields = {
// Apply the new rendering for Priority field on List View
"Priority": { "View": priorityFiledTemplate },
"PercentComplete": {
"View": percentCompleteViewFiledTemplate,
"DisplayForm": percentCompleteViewFiledTemplate,
"NewForm": percentCompleteEditFiledTemplate,
"EditForm": percentCompleteEditFiledTemplate
SPClientTemplates.TemplateManager.RegisterTemplateOverrides(fieldsContext);
// This function provides the rendering logic for list view
function priorityFiledTemplate(ctx) {
var priority = ctx.CurrentItem[ctx.CurrentFieldSchema.Name];
// Return html element with appropriate color based on priority value
switch (priority) {
case "(1) High":
return "<span style='color :#f00'>" + priority + "</span>";
break;
case "(2) Normal":
return "<span style='color :#ff6a00'>" + priority + "</span>";
break;
case "(3) Low":
return "<span style='color :#cab023'>" + priority + "</span>";
// This function provides the rendering logic for View and Display form
function percentCompleteViewFiledTemplate(ctx) {
var percentComplete = ctx.CurrentItem[ctx.CurrentFieldSchema.Name];
return "<div style='background-color: #e5e5e5; width: 100px; display:inline-block;'> \
<div style='width: " + percentComplete.replace(/\s+/g, '') + "; background-color: #0094ff;'> \
 </div></div> " + percentComplete;
// This function provides the rendering logic for New and Edit forms
function percentCompleteEditFiledTemplate(ctx) {
var formCtx = SPClientTemplates.Utility.GetFormContextForCurrentField(ctx);
// Register a callback just before submit.
formCtx.registerGetValueCallback(formCtx.fieldName, function () {
return document.getElementById('inpPercentComplete').value;
return "<input type='range' id='inpPercentComplete' name='inpPercentComplete' min='0' max='100' \
oninput='outPercentComplete.value=inpPercentComplete.value' value='" + formCtx.fieldValue + "' /> \
<output name='outPercentComplete' for='inpPercentComplete' >" + formCtx.fieldValue + "</output>%";

Hi Patrick,
It works in my test environment using your code.
I suggest follow the steps as below:
1. Save the following code as a js file (TaskListView.js) and upload it into the SiteAssets Document Library.
2. Edit the list view page.
3. Edit the list web part. Go to Miscellaneous -> JS Link.
4. Add the following URL into the JS Link textbox.
~site/SiteAssets/TaskListView.js
5. Click "OK" and save the page.
If it still not works, please check whether active the Minimal Download Strategy feature in site feature or not.
Best Regards
Dennis Guo
TechNet Community Support

Trying to change the APN on my iPad for a new data provider. Each time it returns to the original. Any suggestions?

trying to change the APN on my iPad for a new data provider. Each time it returns to the original. Any suggestions?

Hi Canberabomber,
If you are having issues setting or changing the APN on your iPad, you may find the following article helpful (apologies if you have already seen it):
iOS: About cellular data network settings (viewing or editing the APN)
http://support.apple.com/kb/ht2283
Regards,
- Brenden

HT1645 I did step 2 but my computer isn't giving me the pop-up in step 3 so i can't push an OK button. I waited 15+ hours for it to burn and it sent me to this page. I have tried to change the encoding settings again, and it adjusts the capacity but no

I did step 2 in the "iDVD: Setting Encoding preferences" but my computer isn't giving me the pop-up in step 3 so i can't push an OK button in regards to the message. I waited 15+ hours for it to burn and it sent me to this page. I have tried to change the encoding settings again, and it adjusts the capacity but no message pop-up appears.

You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
(1) Page Info > Permissions tab
While viewing a page on the site:
* right-click and choose View Page Info > Permissions
* Alt+t (open the classic Tools menu) > Page Info > Permissions
(2) about:permissions
In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
Any luck?

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plane two dimensional view, which is a little plain. Can I revert back to an older version via my time capsule save?

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plain two-dimensional view, which is a little dated. Can I revert back to an older version via my time capsule save? C'mon Apple upgrades supposed to leap into the future not the past. :-(

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plain two-dimensional view, which is a little dated. Can I revert back to an older version via my time capsule save? C'mon Apple upgrades supposed to leap into the future not the past. :-(

Trying to change the Tab size of SQL Server 2008 R2 ?

Been trying to change the size of the tab but it just doesnt change!
Went to Tools-Options-Text Editor-Transact-SQL
From 2 to 1.
Any ideas?

Hi Shavendra,
The Options dialog box lets you change the default behavior of the Database Engine Query Editor while you are programming Transact-SQL scripts. To display these settings, click Options on the Tools menu, expand the Text Editor folder, expand the Transact-SQL
subfolder and then click Tabs.
Tab size: Sets the distance in spaces between tab stops. The default is four spaces.
Reference: http://msdn.microsoft.com/en-us/library/bb895215.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud.

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud. Every time I go to the account settings of my existing account (which currently uses my university email, as I set it up years ago and had no idea it'd eventually cause problems), I enter a different email to use for that account but I continuously receive an error message saying "account changes cannot be saved." It makes me think that it's because the email isn't verified (funny, it actually is verified since it has been the alternate email on the old account for years), but when I click the "send verification email" nothing happens (that is, no email is sent to that other email address).
Anyway, my university is now requiring that faculty create new accounts using our university email addresses in order to register/use Creative Cloud. Am I able to delete my old account, or can anyone help me actually change the email address associated with my old account without getting a "changes can't be saved" error?

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

HT5621 Trying to change the email on my apple ID but get error message that the email I want to change to is already used for notifications. What do I do?

Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this. The email address is connected to my Ipad and Iphone for the email app, can that have anything to do with it?
If it makes any difference, I updated both my Ipad3 and Iphone4 to ios 7 today. I'm trying to change from my Macbook air though.
Please advise, would really appreciate a reply ASAP.

caek1 wrote:
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this.
It means exactly what it says... The email Address is in Use. You cannot re-use it.
Apple ID Support > http://www.apple.com/support/appleid/

Views for list web parts. Is there a way to allow users to change the view for a list web part without being redirected?

Hi,
I added a list view web part into a SharePoint 2013 page and it is working as expected, except for one thing.
I have enabled the option for the user to change the view for the web part. However when the user changes it, the user is redirected away from the page containing the web part, to the URL of the list itself.
Is there a way to circumvent this issue so when the user selects a different view it updates the listing in the web part itself, rather than the user being redirected?
Thanks in advance for the help.
Regards,
P.

Hi,
Please understand that one page can only display one view. You could find it out by observing the Address in browser when switching among different views for a list.
If you would like to change the view of a list web part, you could go to web part propertites > Select view and configure it.
In addition, here is a thread with similar requirement that might help:
http://social.technet.microsoft.com/Forums/en-US/18dba190-5ee2-4b50-b005-1360d862f4ba/how-can-end-user-change-the-view-in-a-list-view-web-part?forum=sharepointgeneralprevious
Regards,
Rebecca Tu
TechNet Community Support

I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !

I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !

Thank you very much! This is exactly what I was looking for.
I appreciate your time and effort in solving my question : )

Trying to change the view in a keynote presentqtion from horizontal to vertical...

Similar Messages

Maybe you are looking for