Trying to clarify what these are: is airport extreme a router? What is airport express?

Trying to clarify what these are: is airport extreme a router? What is airport express a router as well?

SimonJester753 wrote:
It was a long time ago. I remember wanting to connect my desktop mac via an ethernet cable, but the setup assistant was insisting on wireless. I think I finally took out the wireless card from my Mac so it would use the ethernet cable. Eventually I put the card back.
The zillion and one setting to wade through might mean more choices to the tech-heads, but I just wanted it to work.
I don't recall the type of router we had at my previous job, but I just plugged it in, went through a simple set up and forgot about it because it just sat there and worked.
I have had to go back to factory settings and start from scratch with my Extreme many times. The last time the amber light started blinking I just ignored it for months, because it didn't effect my internet connection, I just lost the ability to get iTunes over to the Express I have hooked up to my stereo.
BTW, what's a wall wart?
The big box on the cord.

Similar Messages

  • I cannot get to setup my airport extreme G router as my Airport Admin Utility is not detecting my base

    I cannot get my Admin utility to detect my base and I do not know why. Please help

    The issue here is that AirPort Utility in Mountain Lion 10.8.x will no longer support the older versions of the Express.
    If you have been thinking of adding a newer faster AirPort Express, now would be a very good time to do this.
    If you want to continue to use the older Express, there is a special workaround that will allow you to install a version of AirPort Utility on Mountain Lion that can be used with your Express.
    See this article for more details:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
    As you might imagine, this is not officially supported by Apple. It does work for me, but there is no way to know if it will work well for you.

  • Are not the right ones for the icloud account. How can I find out what these are?

    I have downloaded icloud onto my PC. When I try to access my account I am told that although my Apple ID and password are correct they are not the right ones for the icloud account.How can I find out what these are?

    Christine Helen wrote:
    I can't find any way of creating an icloud ID. I only have a PC. no Mac product except an iPod classic.
    Oh, then you can't unless you know someone with a Mac you could use for a moment or 2. (Like at the Apple Store)

  • Hard drive shows 159gb of other (yellow) how do I find out what these are to free up space?

    hard drive shows 159gb of other (yellow) how do I find out what these are to free up space?

    Hope this helps.
    1. Empty Trash.
        http://support.apple.com/kb/PH10677
    2. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    3. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836
    4. Disk space / Time Machine ?/ Local Snapshots
       http://support.apple.com/kb/ht4878
    5. Re-index Macintosh HD
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409

  • There are many text messages from various 'small' numbers, such as 000254879. Anyone know what these are?

    There are many text messages from various 'small' numbers, such as 000254879. Anyone know what these are?

        Great question mhollomon! These may be spam or an  autotext type of message. Here's a great link with spam control links: http://vz.to/1m7f4ao
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • Anybody know what size are the screw's to keep place the Airport card?

    Hi Folk's
    Anybody know what size are the screw's to keep place the Airport card? as I got a card here that I've had sitting around and now I've set up wireless network that reach out to where my Mac Pro is located but I don't have any screw that fit arrgh !
    TTFN
    Subcoustic

    Hi,
    I purchased an Apple MB988ZM/A Airport Extreme Wireless Upgrade Kit for my 2.93GHz 8-Core 2009 Nehalem Mac Pro a couple of months ago.
    The kit includes 2 screws inside a transparent pack. The description on the pack reads:
    "HH111009 603-9823-A Assembly Screws China".
    The screws are approximately 4.5mm in overall length, of which about 3mm is the thread.
    The thread appears to be fine, and the round head of the screw takes a Philips 00 screwdriver tip.
    I have checked one of the screws with my "screw gauge" (I am a very keen DIYer!), and its diameter measures 1.5mm.
    Hope this helps.
    Regards,
    Bill

  • Hourly popup saying there's an update for my AirPort Extreme, when all of my AirPort devices are running the latest firmware. Any fix?

    I keep getting a popup saying there's an update for my Airport Extreme, but all of my Airport devices (I have the Extreme, which is one of the original cone-shaped ones, as my base station, two Time Capsules running in bridge mode connected by Ethernet, and an Airport Express [original model] connected via wireless) are running the most recent firmware for each device.
    It's harmless but extremely annoying. Has anyone else had this problem? I've tried re-uploading the firmware to all four Airport devices, but it didn't help. Is there any way to turn off the automatic checking? It's obviously not working right in any case.

    I assume that you have already done the basic things like powering off the entire network and restarting.
    Open Macintosh HD > Applications > Utilities >  AirPort Utility 
    Select the AirPort Extreme, and click Manual Setup
    Click the Base Station tab located below the row of icons
    Click Options near the bottom of the next window
    Remove the check mark next to "Check for firmware updates"
    Click Done, then click Update and wait for the AirPort Extreme to restart.

  • We have an old titanium PowerBook that will not connect to our AirPort Extreme network. What gives.

    We have an old titanium PowerBook that will easily connect to any WiFi cafe or hotel network, but will not connect to our AirPort Extreme network. What gives.
    When the Apple Tec. installed our network for our 3 iMAXs, he couldn't it to connect either. Of course our two iPads have no trouble connecting.
    We are also having trouble getting it to upgrade from OS 10.5.8 to 10.6, even though I have a Snow Leopard up date family pack.

    What is your Wireless Security setting on the network?  Since you are running Leopard, I may not have the desired answer, but some of the Airport-equipped laptops, like the TiBooks, are said not to support all of the settings.  I have an AE network which supports b and g, with "WPA2 Personal" settings and the TiBooks connect with that one OK with 811.b Airport.
    Oh, and no way to upgrade beyond 10.5.8 Leopard for PPC machines like the Titanium G4 Powerbooks, as 10.6 and above require Intel processors.
    EDIT: I didn't notice this, but the TiBooks may be connecting with WPA encryption on my network, as I have the following display on my settings:

  • Airport Extreme n Speed - What Apple Advertises

    I successfully set up my airport extreme n router, updated the firmware, and have an all "n" network - the router is set to "n" only and my network adapters are all "n". Apple advertises on its Apple Store website and so do many of its competitors up to a fivefold increase in speed for an "n" network over a "g" network - up to a 300 mbps speed for the extreme "n" router. I am getting, according to my windows computers, a 130mbps speed, a far cry from the advertisement. Apple says there is nothing wrong with the router so they cannot help. Does anyone have any ideas or are you experiencing anything similar? Point of Note: when I click "connect to a network" in Windows and hover my mouse over my network name - a popup appears saying "Radio Type - 802.11g". I have disabled my g adapters that are installed inside my notebooks so that should not be an issue. I have external adapter cards which are "n" and are the only enabled adapters. I will definitely appreciate anyone's help or experience with this speed issue. Thank you.
    Dell Inspiron 8600, Mac: Original 17" Flat Panel Imac, Dell 9200c, and eMachine M6811   Windows Vista  
    Dell Inspiron 8600, Dell Dimension 9200c, Mac Original 17" inch Flat Panel Imac, and eMachine M6811   Windows Vista  

    I also have an Apple TV. I don't believe that there has been a significant problem with streaming from iTunes to the Apple TV (this is not an Apple TV forum so I want to make this quick). Where things really slow down is when you are syncing your computer (iTunes Library) and downloading songs to the Apple TV via a wireless system - it is really really slow. I downloaded 4000 tracks from my G5 tower to the disk in my Apple TV and it took in the neighborhood of 12 hours. If I would have done it via ethernet it would have been much faster but the Apple TV and my main household computer are four floors apart.
    Also note that my system, although I have an 802.11n AEBS, is all b/g - two desk tops and two laptops.
    I also have three Expresses at various levels of my house as part of a WDS that have powered speakers attached and to extend range and they all work flawlessly with superb sound from my JBL Thing speakers. Couldn't be happier.

  • Airport Extreme, Linksys Router WRT54G: Internet is Impossibly Slow

    I have a problem regarding wireless internet activity on my Powerbook G4. In my house, I have a Linksys Router (WRT54G) that has worked fine for other laptops (including an iBook running Airport Extreme, a Powerbook G4 running Airport, and an iMac running Airport) for many years. When I got a refurbished Powerbook G4 1.67 GHz with Airport Extreme, I found that while Airport could be configured to recognize the wireless network (with a WEP 40/128-bit encrypted key), it barely works on the computer. The signal strength is strong (the laptop is hooked up right above the Linksys router), but the Internet barely works at all. Surfing to webpages takes 10-20-30 sec to work, and often the connection seems to drop off all together. Something is clearly wrong because despite the fact that this is my fastest computer with the fastest wireless capability, it runs at a slower pace than any computer I have ever used on the web.
    I was wondering if anyone has had similar problems with getting Wireless Extreme on Powerbook G4s to work with this particular (and older) model of Linksys wireless browser (WRT54G). Some Internet sleuthing led me to believe that perhaps the router firmware needs to be updated or something like that, but I haven't really found any definitive answers. If there is anything wrong on the laptop-OS-side, I have no idea. I would appreciate any pointers that you can provide!
    Thank you to all,
    Matthew
    Computer:
    Powerbook G4
    1.67 GHz
    1 GB DDR SDRAM
    OS 10.4.8
    Wireless Router:
    Linksys
    Model: WRT54G
    Powerbook G4   Mac OS X (10.4.8)   1.67GHz, 1GB DDR SDRAM

    Hi all,
    Thank you for your help. Unfortunately, my problems persist.
    I was able to reset my router and to configure it again on the web-based router configuration.
    As per your suggestion, I tried switching the Wireless Network Mode to "G-only." Not only did this kick off my older computers on the network (an old iMac and an older Powerbook G4, both with normal airport), but it did not fix the speed problems on the new Powerbook G4/with Airport Extreme. I am back on the mixed setting now in order to get most of the computers on the network back to their old working states...
    I also tried disabling my WEP encrypted key but found that this did not speed anything up at all.
    I have upgraded my firmware from its previous version, v 1.41.2 (very old!), to the latest from the Linksys website: v 4.30.5. This has not helped at all either.
    Is it possible that there is any setting on the Powerbook/Airport Extreme itself that is causing these problems?
    Thank you all again for your help,
    Matthew
    Powerbook G4 Titanium   Mac OS X (10.4.7)   1gHz, 512mb RAM

  • WDS networking issue - Airport Extreme (802.11n) and remote Airport Express

    *Background Info:*
    Airport Extreme 802.11n (Fast Ethernet)
    Version: 7.2.1
    Wireless Mode: Participate in a WDS network (set as main)
    Network Name: @Home
    Wireless Security: WPA/WPA2 Personal
    Channel: 1
    Airport Express
    Version: 6.3
    Wireless Mode: Participate in a WDS network (set as remote)
    Network Name: @Home
    Wireless Security: WPA/WPA2 Personal
    Channel: 1
    Radio Mode: 802.11b/g compatible
    Connect Using: AirPort (WDS)
    Connection Sharing: Off (Bridge Mode)
    Issue
    Please help as I'm having issues with my WDS network. I've setup using both the wizard and manual and also hard reset on both units to setup again but cannot get them both to communicate to one another. Both units are showing green LED under their configuration. For my last attempt, I've tried adding the Airport ID (MAC) of the Airport Express to the Access Control and also DHCP Reservations on the Airport Extreme but still no luck.
    The Airport Express (setup as remote) does not even show up in the Airport Extreme's Summary as Wireless Clients. In the WDS tab, the Airport Extreme is set up as WDS main, Allow wireless clients box checked and WDS Remotes has the Airport Express' AirPort ID in the list. On the Airport Express, WDS is set up as remote, with Allow wireless client box checked and the Airport ID of the Airport Express in the WDS Main.
    I can connect clients to both units. Both units are configured using the same Network Name and have the same WPA/WPA2 security key. The Airport Extreme (main) however is connected to my broadband so any devices or clients connected to it are able to get outside. Connected devices or clients are assigned IP address via DHCP with IP 10.0.x.x. If wifi devices or clients connect to the Airport Express (remote) they are assigned a completely different IP addresses 169.254.x.x, they are not able to browse the internet or talk to other clients connected on the 10.0.1.x network. The Internet Connection configuration on the Airport Express (remote) is Connect Using Airport (WDS) and Using DHCP. I've even tried manually and entered the IP address 10.0.1.199 that I had assigned to the Airport Express from the Airport Extreme and Router Address as IP of Airport Extreme (10.0.1.1).
    I think I've tried everything but I'm still having this problem. The remote Airport Express is not extending my existing Airport Extreme network. Any ideas???

    Christopher,
    This may or may not be helpful, or it may be something you've already tried or are aware of so I apologize if that's the case.
    I have been researching ways to set up the Dual Band Network supported by the AEBS and came across your post. I've got an AEBS and (2) AirPort Express set-up currently (AEBS is main and the Express are participating in the WDS as remotes) and I'm trying to configure one of the Express to utilize a 802.11b/g compatible network while the AEBS runs a 5Ghz 802.11n Only network.
    AAR, since the AirPort Express are 2.4Ghz 802.11b/g ONLY (no support for 802.11n), you have to be sure to set-up your AEBS first and select "802.11n (802.11b/g compatible)" in the Radio Mode drop-down on the AEBS before you attempt to connect an AirPort Express. The AEBS should be set-up as your "WDS main" and the Express should be set-up as a "WDS remote" for the network you established when you set-up the AEBS.
    Bottom line here is the Express won't be seen by the AEBS unless the AEBS is 'looking' in the 802.11b/g 2.4Ghz frequency.
    Hope this was helpful.

  • HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

    I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Airport Extreme ethernet routing in Bridge Mode

    i had(!) the following scenario Airport Extreme (5th Generation) .. via WAN connect to the modem, Ethernet to serval switches, WiFi acting as WDS Main
    the WDS Slaves are 3 small Airport express and one Airport Extreme (1st Generation)
    due a cabeling problem i had to move the WAN Modem .. and connected it to the 1st generation airport extreme created a Joined network (not WDS) enabled DHCP on the same device.
    the new Airport extreme (5th generation) and the Airport Express joined the same network and running in bridge mode.
    everything works just like before .. all networks parts can connect to each other, anywhere else including the internet.
    exept of anything connected to the ethernet ports of the (now slaved) airport extreme (5th generation) anything connected there seems not to be routed at all ..
    they have a physical connection (link show on the Airport and on the Switch. but there is zero data going trough ... no DHCP adresses assigned. manually assign a IP in the same network results in the same effect (can't even ping the directly connected Airport Extreme.
    is this a Bug ?

    oh ic ... thats why it worked before the other way arround ...
    well does still not make any sense to me .. but you are 100% right ..
    enabeling WDS on the Airport Extreme (1gen) and doing slave the Airport extreme (5 gen) works fine .. but the connection times are about 10 times slower than in a joined network.
    which makes the whole show extremly slow ...
    it takes some times 5 minutes and a million time clicking (assign new) to just get an IP adress ... even if the dhcp running on the same Airport where the client is connecting to ..
    if the 5gen APE is WDS master .. and the 1gen is WDS Slave (my old setup) .. this problem is not existing ...
    but then ican't connect the WAN modem to the slaved Airport since the slave is always bridged and the master requires internet connectivity trough the local Wan port
    any idea to get arround this ?

  • How to extend the range of my Airport Extreme network by adding an Airport Express

    How to extend the range of my Airport Extreme network by adding an Airport Express?

    You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
    The instructions that I will provide are for using AirPort Utility 6.0, which you have.
    Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
    Make sure that the wireless is turned on your Mac
    Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
    Click on the rectangle, and then click on the AirPort Express xxxxxx listing
    AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that  the Express be configured to "Extend" your wireless network.
    Edit the Base Station name to your liking, then click Next in the lower right hand corner
    Allow a full minute or two let AirPort Utility do its work
    When you see Setup Complete, click Done at the lower right of the window.
    Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
    You should be in business.

  • Can an airport extreme be used as an airport express?

    Can an airport extreme be used as an airport express?

    With the newer extreme, I was looking for better coverage
    In theory, you might expect better performance. Apple added two additional antennas and moved them up to the top of the "tower" in the "new" Extreme.
    But my "new" Extreme really performs about the same as the previous version Extreme. It might be a bit better range wise, but nothing significant here. If you are looking for really noticeable improvement, you will likely be disappointed.
    just want to know if the old extreme can funciton as an express to extend the signal to another part of the house
    Yes, it can, but in order to do this effectively, it must be located where it can receive a strong signal to be able to extend it. In this regard, the device can only "extend" the quality of signal that it receives.
    You lose a portion of the network speed with each device that you use to extend wirelessly, so adding another device to extend wirelessly may not help at all.  It would be much better if you could connect the "new" Extreme and "old" Extreme together using a wired Ethernet cable.....since there is no signal loss that way.

Maybe you are looking for