Trying to clean install Leopard 10.5.6 and not having any luck!
I recently received a Powerbook G4 15 inch from a friend of the family without any OS installed on it. I was told by the tech's at the Apple Store that it would take Leopard OS so I purchased Leopard 10.5.6 and now I'm trying to install the software and I am continually getting multiple errors while trying to install.
So my question is:
Is Leopard 10.5.6 compatible with my Powerbook G4 15 inch and if it isn't can someone PLEASE tell me which OS is compatible with my Powerbook? Thanks in advance!
I just did this on a 1.67ghz PBG4 with a replaced HD so I know it can be done. As Neil said, if you have a retail copy it should load fine. If you have an original disk that shipped with a machine (Gray Disks) then it will not work. Maybe you should check with the person who gave you the machine to see if they were having any problems. OR, find out if they have the original gray Apple install discs so you can at least run a hardware test.
Good Luck!
Similar Messages
-
I'm trying to wirelessly print to my samsung printer. I've downloaded the bonjour printer wizard and could tell that a signal was going to my printer but it still would not print. Anyone have any ideas?
You didn't state how it's connected to each computer, if it's connected through your router then it should work. If it doesn't then you need to contact Canon and ask for assistance.
-
I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.
If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao. -
I am not having any luck trying to create a brochure with ID in CC
I am not having any luck trying to create a brochure with ID in CC. i thought i remembered it to be something you can use in Bridge also. Can't seem to find that either.
anyone have any help they can offer?If you're starting from scratch learning InDesign, know that it's difficult to learn just by asking a few questions. You'll do much better either by buying an excellent, inexpensive book by Sandee Cohen:
InDesign CC: Visual QuickStart Guide
Or by watching some videos on www.Lynda.com. Here's the best introduction:
InDesign CC Essential Training -
I have a mac os x 10.7.3 and am trying to install a dell v515w printer. Have tried numerous times to find driver, but mac says not compatible. I read something about using a Lexmark driver. Any suggestions???
Thanks so much,If there is no driver compatible with OX X 10.7 you might want to consider getting a different printer. It may save hair pulling and aggravation.
-
I had windows 8.1 and wanted to revert to windows 8 so i by mistake formatted the c:/ drive containing os and now when i try to install windows 8 i get the error "The product key entered..."
And i dont even have recovery image in my pc. I am using a dell laptop and i have windows 8 dvd given by dell which reads" windows 8 recovery media for windows product"
Please guide me asap.OEM keys are embedded on hardware, you might not need to enter the key in your case. I would suggest you to call Dell support here.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
I have downloaded a wedding video done on my iPad and put it in iMovie on my MAC. Have spent many hours refining it and now want to burn onto DVDs for other family.
When I did this same thing 4 years ago, I had one-to-one help at apple store and saved the video in M4V format and it was not a problem to share the video.
Now this video is in Mp4 and I need it in M4V - that is what the burning devise tells me.
I downloaded a video converter, but it didn't seem to make the coversion.
IDEAS?Have you tried this -> https://itunes.apple.com/us/app/free-mp4-converter/id693443591?mt=12?
It's free at the Mac App Store...
Clinton -
I am trying to authorize my computer and am not having any luck
I am trying to authorize my computer to download some apps and it tells me to go to the apple store and go to authorize my computer and I do it and i am getting nowhere. Does anyone have any solution to this problem??
Have a look here http://support.apple.com/kb/TS1389
And Here About authorization and deauthorization -
Trying to get a photo file from dowmloads folder to Iphoto so I can burn to disc.Can't figure out how to do it.Tried dragging states unrecognizable file.Help.
That's not a photo file; it's a compressed container which could contain almost anything.
Where did you download it from? Was it shown as a photo in Google Images or one of the other search sites? -
I am trying to understand my Console System Log Queries, but not having much luck!!
I am trying to understand my MB late 2011, much better than I do, whilst looking through my console messages, I realised I don't have a clue as too whats what, I seem to be getting a lot of system errors - Is this normal?
Why are Mac Books soooo complicated - !
I would copy and paste my system messages - but once again I am 2 thick - don't know which bits - if any would need editing!
Any advise would be a great help.
Thankyou in advance.
la9You would use the Input button on your remote to set the Input to RGB PC and you'll also need audio cables to the TV because the Mini-DVI does not carry audio using a 3.5mm stereo headphone jack to RCA sound plug. You attach it from the headphone jack of your MacBook to the appropriate input plug on your TV.
When you first hook it up it will probably have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. -
I have an iMac and cannot access my office computer running Windows Small Business Server 2008 through Remote Desktop. Any ideas?
Hi, do you know it's IP? Can you ping that?
Might give a try with the free
logmeIn...
https://secure.logmein.com/products/pro/register.aspx -
iPad and phone pair but when I try to turn on connection IPad says not supported.
For what purpose? The iPad only has the BT profiles for keyboards, speakers, headsets, car systems and sharing an internet connection. You can't transfer files over BT.
-
A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help
Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous. -
How many times can you clean install leopard on the same computer?
How many times can you clean install leopard on the same computer? Will the leopard dvd run out of installations and not let you install anymore?
Hi colman Prez;
Now that the funny comments have been made, I have a serious question and that why are you worry about reinstalling Leopard with an Erase & Install which is what I take that you mean when you say clean install. In actually fact there is no such thing in OS X as a clean install.
I am curious because in all the years I have used OS X, I have yet to do an Erase & Install yet.
I know with Windows that they suggest reformatting and reinstalling at the drop of a hat but that isn't true with OS X.
Allan -
Bluescreen when trying a clean install from CD - X61
Hey,
I got a question from a neighbour if I could help him reinstall his laptop. It's a X61.
He got it from his employer when they decided to buy a bunch of new laptops for the company. Therefore he has no backup discs, no system reset software or anything. It's just the laptop and the power supply. He used the laptop 'as is' for a while but now it needs cleaning. He asked the IT department on his job but they didnt save any discs or software for the laptops. There is a Restore and Resque partition on the HDD which is accessible via the Thinkvantage button at boot, but no software in that console is working.
So he went out and bought a Windows XP license to make a clean install on the PC but we are having difficulties to make it run...
I tried to format an USB stick to install Windows XP from. After boot I only get a blank screen with a flashing marker...
I tried an external DVD-drive since the PC doesnt have any and I get the installations program to run. It starts to load the files but after a short while I get a bluescreen...
I'm running out of options here, any suggestions?echX, welcome to the forum,
a solution that works for a lot of people is to set the SATA to compatability mode in BIOS; press F1 at boot > Config > SATA. After XP has been installed you can install the necessary driver and switch it back to AHCI.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Maybe you are looking for
-
I can't get to computer help menus, get error not available at this time. I was told by apple that the problem is with Hughesnet Gen 4. I called them and they have no answers. No other problems accessing the net.I have lots of questions as I am new t
-
Maintain Partner Bank Type for customer
Hi, I have a problem when running the payment proposal via F110. I want to procede to a customer/vendor clearing, the problem is that the partner bank type is filled for the vendor but not for the customer. If i want to maintain "partner bank type" f
-
LOV is not populating when pressing tab in OAF with common value
Hi, How to make the LOV gets populated after entering any value and press the tab button. For ex: If i enter item number "100012" and press tab then the LOV is displaying the values and item description is auto-populated. In my case there are two val
-
Pictures look completely different in Aperture
I shoot with a Pentax K200D with RAW+JPEG using the PEF format for RAW files. I then use Apple Aperture to edit the files, but I recently noticed that pictures converted to jpeg using aperture looke very different from the PEF files when viewed side
-
How to remove the "Firefox" tab from XP?
I can get rid of it from the first FF window if I enable "Menu bar". However, this doesn't work when I open a new window from the first FF window. I hate it simply because it's a window inside a window when that "Firefox" tab shows. That means you ge