Trying to combine audio from a video clip with a photo

Is there a way to allow the audio of a video clip to continue, while the visual is changed? I'm trying to insert a photo to replace the last few seconds of a video as the song in the video finishes.

Not at the moment. Hopefully at some point they will add a feature to independently trim the audio and video to allow this type of edit, otherwise known as an L cut.
tt2

Similar Messages

On iMovie how can you mute a section of the sound track so you can hear the audio from the video clip?

.

Hey,
If you double-click on the soundtrack you can open it up in the inspector tab and lower the soundtrack so that you can hear the audio from the video clip.
A great resource for finding answers to questions like this is http://www.imovietutorialhelp.com
You can ask questions just like these and they will be answered for you. If you need a tutorial video made or anything like that, you can go there as well and ask for a video to made as well. Check it out.
If you still have questions on how to do this, they can help you for sure.
I may receive some form of compensation, financial or otherwise, from my video or link.

How to extract audio from a video clip

I am editting a video, and I need to extract the audio from a video clip. On the old iMovie it was really easy, all you had to do was press apple K I think. Thanks in advanced for your help.

Select the clip in the sequence.
Then command-L to unlink the clips.
Then select the audio and delete.
As a suggestion, two things:
1. Explain what you want to do. If it is delete the audio, then that is different than extracting the audio;
2. Do a search in the pdf manual in the help manual

Patch in Audio from Similar Video Clip

I have video of our church's Christmas play, shot with a Panasonic TM700. The audio is with the video, from the camcorder. My problem is that in some of the dialog, one girl's lapel mic quit working, so every time she speaks its really hard to hear what she says.
I have similar video from a dress rehearsal where this person's mic was working fine. I'd like to be able to replace the bad audio from the actual performance with the good audio from the dress rehearsal, just for this one person. Can someone suggest a good workflow for that? Can it all be done in FCPX, or does the good audio need to be extracted from the video before bringing it in?

Never mind, I figured this out. I just imported the clips from the rehearsal to my event, right clicked and chose Open in Timeline, then copied and pasted the audio from there to my project. Pretty easy.

How to extend audio from a video clip over an adjacent still image

I'm in iMovie 11. My project looks like this: video A, transition, still image B, transition, video C. I want the sound from video C to start playing while still image B is on the screen. I tried following the iMovie 11 help instructions for extending a video clip's audio. I click on video C and open the precision editor. From there I can grab video C and move it back so that it overlaps with the still image, but all that happens is the still image still shows up, without sound, and video clip C starts in the middle. The help instructions seem to indicate that I should be able to drag only the audio and make that overlap the still image, but it's not happening. Either the video and audio move together, or nothing moves.
When I try detatching video C from its audio, I just end up with a big mess because later the audio and video don't synch up.
What am I doing wrong?

I am having the same challenge... any tips here would help me out in a big way. I recorded my boss tdoing a training session and now I would like to have the powerpoint slides change as necessary - but I want the audio to remain. I would love to just get the slides to change rather than back to full before bringing up the next slide. Jim, if you come up with anything, let me know. I have VC2 pro.

Taking audio from one video clip to another

Hello,
In editing a short film, there are scenes where the director is talking in the background, while the action is going on. If I like the video of this particular take, but want to use sound from another take, what would be the best way of doing this? I could conceivably take the sound from the one clip and put it in with the desired video clip, but, I do not know if that is the most efficient way, especially when it comes to matching up everything - thanks!

This is one of the basics of editing Kristina. Just cut the video you want on V1 (video only), then put the audio you want on V2. This happens ALL the time. Director giving directions in the middle of shots. This is one of the reasons we get room tone after we are done shooting, before you wrap a set. Need to have something to cover the hole you make in cutting out the BANGS and dolly moves and director talking...stuff like that.
Shane

Is there a way to separate audio from a video clip in iMovie HD?

iMovie 6.0.4
Sorry if this has been answered before.
Is there any way to edit audio within iMovie? What I mean is, importing an audio file but then editing and separating the audio file into smaller pieces. Is there a way to do this?
Thanks for any help, much appreciated!

Edit the same as you would a video clip. Highlight the audio clip by clicking on it, then select the place you want to edit it with the playhead, go to EDIT and select Split Audio Clip at Playhead.

Remove a logo from a video clip with content aware fill?

I know you can remove logo in photos using content aware fill, but you can't do it to a video clip. You can only do it to a frame, but you can't apply it to the entire video. I know photoshop is not a video editing software, but having this sort of feature makes sense for photoshop users especially with content aware fill.

I'm a career software architect engineer of 35 years, and I have to side with Howard on this one.
Like Howard, I feel you're thinking about this way too simplistically. Trying to work out what best to fill a part of an image with in 3 dimensions (x, y, and time) and have it look believable almost boggles the mind, especially thinking of a general case (your logo example is far to simplistic in itself). The task is far from a simple looping repeat of what is being done 2 dimensionally on a still frame. Frankly, it's more likely related to what's done with CGI, where scenes are modeled in 3D (4D actually) so certain elements can be replaced believably.
Think about it... If CAF is presently replacing part of an image with something it finds through some heuristics in another part of the image, and the stuff in that part of each frame is changing - and it would, because this is video, not still imagery - then it will select differently every time. What makes you think it would select something that even resembles what it selected for another frame? What you'd end up with is a frame by frame mishmash that would just make the outline of the selection obvious.
Regarding CAF applied to individual frames, then your finding the result isn't coming out as expected in all the frames of the video (e.g., when you're testing this concept) may indicate a problem with the way you're using the tool, or possibly even a bug. You might want to describe step by step what you're doing and show the result you're [not] getting.
-Noel

Can you record the audio from a Video embedded in a pdf?

I can't seem to find anything on this, so I will ask. A client sent us a company produced interactive pdf and wants us to use the audio from a video clip that is in the pdf. We asked for the audio clip but they don't know who to get it from and just keep saying it is in the pdf. While others try to explain that a pdf and an mp3 are not the same thing. I get to look into a fall back position of trying to extract the audio (or video). There is no copyright issue here. Client peon just can't/won't get the proper file.
Maybe some one can help or point me to info that says it is not possible.
Thanks.

WireTap Studio did the trick. I downloaded a free Trial version and bob's yer uncle.
Thanks Michael

After I detach audio from the video, and I go to delete the video portion but keep the audio, it deletes both. Am I doing something wrong?

Hello Everyone!
I would appreciate your support if you can. I know how to detach the audio from a video clip. Once this is done I wanted to add another video shot (B-roll) over the audio I detached. When I go to delete the video (which is detached form the audio) It deletes both of them automatically.
Is there something I am doing wrong? Do I need to unpin the audio somehow?
Thanks again.
RJ

Hey I found the info I needed. I decided to show it to anyone else who may be looking for this same answer.
http://www.youtube.com/watch?v=xmP0mUKsJwU

Audio from inserted video keeps playing on next slide

Hello,
I'm experimenting with Adobe Presenter 6. I have inserted a
video clip into a slide. There is a stop action on frame1 with a
button that advances to frame2. The video has audio, which
unfortunately keeps playing if I advance to the next slide. If I go
once slide further ahead, the audio from the video stops. Has
anyone else encountered this problem? It's driving me crazy!
Thanks!

Hi Doc!
I actually ran into the same situation...not with a video
clip, but with a basic flash animation that had audio in it. I'm
not suggesting that the following will definitely work for you, but
it might be worth taking a look at:
Any audio that's set to "Event" while editing in Flash will
continue to "stream" , even while navigating between slides. In
most cases that I've seen (from my experience), audio will stop if
the offending slide is placed immediately before a question slide.
I realize that might not be practical in every case, so....
1. Make sure that audio sync settings in flash are set to
"Stream". What this does is effectively kill off any audio once you
navigate away from the slide that has the embedded flash on it.
2. you can always add a stopAllSounds(); method in flash, but
that's not highly recommended
UNLESS your content slide (with the offending flash object )
comes immediately before, or within a range of question slides.
Again, this too might not be entirely practical based on what
you're trying to do.
I realize that might not help, but as I said, it might be
worth taking a look at how you're incorporating your video.
Rob

Audio portion of Video clips offset

I have a large FCE project with a mixture of video clips and still photos. Most of the processing that I do consists of working with the still photos, such as Ken Burns effect, changing the length of the still photos to conform to voice-over files and so on.
After working with a particular sequence for awhile, about 20 minutes into a 30 minute sequence, I notice that all of the video clips have the audio portion out of sync by exactly 2 seconds.
What can cause this problem, how can I fix it, and what should I do to prevent this from happening again?

Hi David, thanks for the response.
Actually, it wasn’t a case of a few un-linked clips being moved inadvertently. All 20 video clips at the end of the sequence were exactly 2 seconds out of sync. None of the clips prior to those were out of sync. I have no idea how that could have happened, especially only to those beyond the point in the timeline where I was working.
I am normally aware of the 2 menu items: Modify/Link (Command + L) and Edit/Linked Selection (Shift + L). I sometimes use the first to unlink a single clip in order to delete the audio portion. The second menu item, which unlinks all of the clips has the potential to be dangerous and I almost never use it purposely. However, in this case, I used it to fix the problem (I think). What I did was do Shift + L to unlink everything. I then changed the scale of the timeline to so that I could see all of the unlinked audio clips so I could select them together, then moved them exactly 2 seconds to the right so that they now lined up with the video. I then did another Shift + L to relink everything and finished with a Save.
The first time I tried to do as explained above, it didn’t work. The clips were lined up but FCE was still indicating 2 seconds out of sync. After that, I posted my question. While waiting for a response, I tried it again. I have no idea why it worked the second time.

Can anyone help me figure why there is a popping sound when I move from an iphoto still image to a new video clip? The sound has been removed from the video clips and there is another soundtrack underneath it all. Help?

My current project is like many I have created in the past. I have removed the sound from my video clips and laid another soundtrack under the entire project. Now, when I add an iphoto still image to the project, when it goes back into video there is a popping sound. I've never had this happen in the past and have made many projects in the past just like this one. Any way to troubleshoot this issue? Thanks so much for your help.
Ben

What audio output are you using? What mac and version iMovie

Does version 12 support producing video clip with AMR audio codec?

From some documents i used as reference to proceude some videos for my phone Premiere Elements 8 can produce video clips with AMR audio codec. I bought today the Premiere elements 12 but I can not find a way to set AMR audio codec for my video clip. Only AAC audio codec seems available. Is it possible to add AMR codec to 12 version?

Neurona17
Adobe typically supports only current version, and, if you purchased from it, is strict on "within 30 days of purchase": for money back on that current version purchase. I do not believe such a thing as a "change the license for other earlier release such as 8 or 9" exists at Adobe. But, you could ask. If you wish to purchase one of those earlier versions that supports AMR export, you might still find some online.
Is the before import conversion of AMR to WAV a viable alternative?
You wrote
Unfortunately so far I have not been able to generate any useful video clip for my system with this 12 version.
Is this in regard to the AMR requirement or to any video without the AMR audio?
Online I have seen that there is a download for the AMR audio codec. Does your system now show that you have such a codec installed on your computer. If not, I am not sure if download of this codec would place it in the Premiere Elements Publish+Share export settings choices, similar to import of some .avi video codecs. (Sometimes 3rd party codecs can create problem, so proceed with caution if you pursue that AMR audio codec idea.
Please update us on your progress when you get a chance.
Thanks.
ATR

Problem: Audio from the video plays, but video does not show.

Hi,
I used the following code to play the video. The audio from the video plays displaying the player but there is no visual.
There is no problem with the video as I have tried several other videos with .mpg and .mov extensions.
import javax.swing.*;
import java.awt.*;
import javax.media.*;
import java.awt.event.*;
import java.net.*;
public class MediaPanel {
    JFrame frame = new JFrame("Movie Player");
    static Player player = null;
    public MediaPanel(){
        try{ // method using URL
            URL url=new URL("file",null,"c:\\temp\\A.mpg");
            player = Manager.createRealizedPlayer(url);
        } catch( Exception e) {
            System.out.println(" Unable to create the audioPlayer :" + e );
        Component control = player.getControlPanelComponent();
        frame.getContentPane().add( control, BorderLayout.CENTER);
        frame.addWindowListener( new WindowAdapter() {
            public void windowClosing(WindowEvent we) {
                MediaPanel.stop();
                System.exit(0);
        frame.pack();
        frame.setSize( new Dimension(600,600) );
        frame.setVisible(true);
        player.start();
    public static void stop(){
        player.stop();
        player.close();
    public static void main( String args[]){
        MediaPanel panel = new MediaPanel();
}

use this code "Component control = player.getVisualComponent(); "
instead of this code " Component control = player.getControlPanelComponent();"
But if you want show both of them, modify as following
Component control1 = player.getControlPanelComponent();
Component control2 = player.getVisualComponent();
then add the two control (control1 & control2 ) to your JFrame panel

Trying to combine audio from a video clip with a photo

Similar Messages

Maybe you are looking for