Trying to communicate with HP54845A using IVIscope routines and getting error 0XBFFF0011 (Insufficient location information or the requested device or resource is not present in the system).

I am able to talk to the device using the MAX tool and also using Plug & Play VIs. The device is at address 7, so I'm using the string GPIB[0]::7::INSTR. I have downloaded the latest hp345xx dll (version 3.13)and have iviscope version 3.0.2.0 installed.
Thank you for the help.

Hello,
What version of the IVI Compliance package do you have? You can check this under the software tab in MAX. Also, see the attached screenshots for a sample assignment/configuration of a logical name and a driver session. Once you have gone through the analagous steps it should work, where your resource name control in LabVIEW should be populated with the logical name created in MAX.
Repost if this isn't successful!
JLS
Best,
JLS
Sixclear
Attachments:
IVI_Screenshots.zip ‏625 KB

Similar Messages

Tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insufficient location information or the request device or resource is not present in the system

Dear Friends,
I am from Jesus Osorio from Tektronix Mexico. I have seen this error messages during the last instalations and I am wonder how could I solve it?
tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insuff...
I am using DPO4000 series, laptop with SE for Tektronix Edition and a USB cable. What should I do to solve this problem?
Regards,
Jesus Osorio
Jesus V. Osorio Lopez
AE

Dear Jesús,
You should check if you have on your PC or Laptop installed VISA. I recommend you this link to download it:
http://digital.ni.com/softlib.nsf/websearch/b1a7837fffd2826e8625729100689d3c
To have a better oportunity in having your issue solved, please contact us in Mexico at this toll free 01 800 010 0793. As well as if you post your following messages in the Spanish Forum, we will be able to help you faster.
Thanks for using National Instruments Forums.
NorSa
NI Applications Engineer Latin America
NorSa
NI Applications Engineer Latin America
Para Soporte entra aquí

Tried to sync with previously used computer/itunes and lost new photos

I just synced my Iphone 4 but used my old iphone's setting (already on my computer) Now I have lost my photos from my 4... I'm not sure how to restore to how it was before I tried syncing it with my computer...

Sue,
I recommend an external drive to maintain your music. All your purchases are held in iCloud...so redownloading should be easy. Also, Home sharing is a great way to transfer to a new computer, but in the case of hard drive failure your options are limited. Home sharing is specifically for transferring to another pc. Good luck!

Poor network speed with 1st generation time capsule and multiple airport express 5Ghz. My network speed slows to a crawl when not close to the time capsule. I get the range that I need, but the speed is painfully slow.

Hello,
I have a first generation time capsule running 802.11n (b/g compatable) and the airport expresse's are the newer 5ghz models. I have 3 airport express's and I have the range that I need. I can run the time capsule using 802.11n 5ghz, but I loose the range and can't connect to all of the airport express's. My computers and mobile devices run 802.11n. Does anyone have any suggestions on how to increase the network speed. Would the new airport extreme fix the problem?
Thank you

Unfortunately, you are experiencing one of the downsides to 5 GHz. That's because the higher frequency 5 GHz signals are much weaker than 2.4 GHz signals.
After all, you always have to give up something to gain something else. In the case of 5 GHz, you gain potential speed but in return, you must give up penetration power and distance capability.
In order to work well, 5 GHz signals need to almost have a line-of-sight relationship between devices. Unless you can achieve this, you will do much better to leave the Time Capsule running at the 802.11n (b/g compatible) 2.4 GHz Radio Mode and allow the Express devices to "extend" that network.
As for the location of the AirPort Express devices in an exended network, that is critical for best performance. That's because the Express can only "extend" the quality and bandwidth of the signal that it receives. Post back if you need a few more tips on how to find the best location for the AirPort Express devices.
Would the new airport extreme fix the problem?
Unfortunately, no.

Trying to create a VM using reserved IP but getting error "Must specify MediaLocation or set a current storage account using Set-AzureSubscription"

I have created a reserved Ip and wanted to create a VM using the reserved IP. I had also created aimage of existing Vm to create the new VM and I have used command on Windows Powershell as mentioned below.
New-AzureVMConfig
-Name
"Amazon-10eBay-1" -InstanceSize
“Small” -ImageName
“Amazon-10-Image” | Add-AzureProvisioningConfig
-Windows -AdminUsername
“Akash” -Password “Stoneindia11” |
New-AzureVM
-ServiceName
"Amazon-10eBay-1" -ReservedIPName
"ResIPamazon10eBay1" -Location
"West US"
But its showing error "Must specify MediaLocation or set a current storage account using Set-AzureSubscription".
I have been trying to create this Vm from many days but not able to create one. Please help

Hello,
Microsoft Azure forums are over here:
https://social.msdn.microsoft.com/forums/azure/en-US/home
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Using Mountain Lion and getting "Error 102 (net::ERR_CONNECTION_REFUSED)" from some domain names that work on other computers on my network.

I can not load some websites/domain names through Firefox,Chrome & Safari. It seems like a DNS caching issue to me. I have tried flusing DNS cache and changing to to public nameservers with varying success. The domains will load on other versions of OSX on my network, so Iappears to be an OS version issue. Any help would be greatly appreciated.
Chrome Error
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection.
Firefox Error
Firefox can't establish a connection to the server at domainname.com
Safari Error
Safari can't open the page "http://domainname.com" because Safari can't connect to server "domainname.com".

The following update also clears your "computer name" in Syst Prefs > Sharing, and entering a computer name solves network print issues for many. http://support.apple.com/kb/PH11143
From braden85:
About changing or updating printer software in Mountain Lion:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622

Trying to configure test server settings in DW8 and get error

I am trying to setup the test server settings so i can create
some
recordsets.. and everytime i complete the test server
settings page i get a
small box come up that says:
Macromedia Dreamweaver
! No Error Occurred.
OK
thats it.. i hit ok and the settings are there, but i still
cannot create
recordset...
ASP, SQL2005, DW8 VBScript

I get below error when i try to create a domain from import a file option.
PeopleSoft Import Application Server Configuration
1) Import from file
2) Import from application domain
q) Quit
Command to execute (1-2, q) : 1
Enter full path to configuration file
:E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
Enter domain name to create
:CRPROD1
Application Server domain CRPROD1 already exists...
1) Replace existing domain
2) Enter different domain name
q) Quit
Command to execute (1-2, q) : 2
Enter different name for domain: CRPROD
Merging old domain configuration file with new template file...
source E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
and when i try to crearte a domain with " create a domain " option , i got below error message.
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 2
Please enter name of domain to create :CRPROD1
Configuration templates:
1) developer
2) large
3) medium
4) small
Select config template number: 2
Creating domain...
Copying application server configuration files...
Stripping Annotations...
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!
Domain created.
Would you like to configure this domain now? (y/n) [y] :Y
Error opening file 'psappsrv.ubx':
Error opening file 'psappsrv.ubx':
Quick-configure menu -- domain: CRPROD1
Features Settings
========== ==========
Actions
=========
1) Load config as shown
2) Custom configuration
h) Help for this menu
q) Return to previous menu
HINT: Enter 3 to edit DBNAME, then 1 to load

Trying to download Firefox 3.6.13 (twice) and get error "corrupt image, failed to mount

I have tried upgrading from 2.0.0.20, and is the first time I have ever upgraded.
I have MacOS 10.3.9

The last version of Firefox that works on OS X 10.3.9 is Firefox 2.0.0.20. Starting with Firefox 3 the minimum requirements is OS X 10.4, and for Firefox 4 it will be OS X 10.5 and an Intel mac.

TS4268 I have apple ID and when trying to sign in to use FaceTime,i always get registration error.how may you help me for that guys,thanks.

I have apple ID and when trying to sign in to use FaceTime,I always get error in registration,(This words always apper; The server encountered an error processing registration.Please try again later.)
Can I get your Advise on what to do? Thanks

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

End Routine and test on a field not present in target system

Hello,
I find an issue in testing a field present in the ODS source system, using a Transformation.
More exactly, I do not have a field that I need to test in my end routine because I can't find it in the RESULT_PACKAGE structure (because it is not present in the target Cube). In BW 3.x I solved this problem with an enhancement in the communication structure of my ODS and using a start routine.
Any idea for a Transformation?
Many thanks in advance for your kind support.
Regards,
Giovanni

Hello and thanks for your reply.
I have two conditions to implement.
1) Fill some fields of the Cube, NON present in my ODS.
2) Condition on one filed of my ODS (filed NON present in the Cube) for filling some field of the Cube.
In my tys_SC_1 structure of the start routine I find all fields of my ODS and the fields that I need to check but I need to check this filed in one point of my process and set a filed in my Cube (filed not present in my ODS), not present in the tys_SC_1 structure of the start routine.
I hope to have described in a better way may issue.
Any idea?
Thanks.
Giovanni

A network error occurred while trying to communicate with the server.

Hello All,
I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
In console I'm seeing these errors when I try to access various services:
2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

Trying to Communicate with WinAmp

Hi,
I am trying to communicate with WinAmp (MP3 player) through the sendmessage function in User32.dll
So far I can send commands like play, stop, forward, play next etc. but sending a filename to play gives no result.
This is the structure of the command:
#define IPC_ENQUEUEFILE 100
/* This is sent as a WM_COPYDATA with IPC_PLAYFILE as the dwData member and the string
** of the file / playlist to be enqueued into the playlist editor as the lpData member.
** This will just enqueue the file or files since you can use this to enqueue a playlist.
** It will not clear the current playlist or change the playback state.
** COPYDATASTRUCT cds = {0};
**   cds.dwData = IPC_ENQUEUEFILE;
**   cds.lpData = (void*)"c:\\test\\folder\\test.mp3";
**   cds.cbData = lstrlen((char*)cds.lpData)+1; // include space for null char
**   SendMessage(hwnd_winamp,WM_COPYDATA,0,(LPARAM)&cds);
WM_COPYDATA = 0x4A
In the VI you can see what I did. Before running the VI WinAmp must be already started. The led "windowfound" should be on.
I tried several things but no luck so far.
Can someone help me out with this problem ?
Solved!
Go to Solution.
Attachments:
WinAmp Test.vi ‏10 KB

Thank you for your priory information. I need to communicate with a C++ program using WM_COPYDATA. Since I need to send as well as receive data, I tried to write codes that send and receive WM_COPYDATA in LabVIEW. I think I succeeded to send WM_COPYDATA by following your example. However, I could not succeed in retrieving received COPYSTURCTURE data. Since I receive pointer I think I need to retrieve the data from the memory. I tried to use Moveblock, however, I failed. I am attaching my example codes. Please take a look and give me comments.
Attachments:
smlib_WM_main.zip ‏29 KB

An error occurred while trying to communicate with the web browser.

I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
Only the FF browser is open.
When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
[Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
Thank you!

Your above posted system details show outdated plugin(s) with known security and stability risks.
# Adobe Shockwave for Director Netscape plug-in, version 10.2
# Adobe PDF Plug-In For Firefox and Netscape 8.2.4
# Shockwave Flash 10.0 r22
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/

I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with adminis

I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with administration permissions?

If your intention is to use the trial again it will not reset if you reinstall. It will remain in its ran out state.

HT201210 I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with prompt to restore, phone w/screen with iTunes symbol and can't use.

I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

Trying to communicate with HP54845A using IVIscope routines and getting error 0XBFFF0011 (Insufficient location information or the requested device or resource is not present in the system).

Similar Messages

Maybe you are looking for