Trying to configure dsl line on WLC as separate port not part of the LAG
I am trying to configure port 8 on the WLC 5508 to a dsl line that connects to a linksys switch. This is seperate from primary port which is configured as LAG and has the rest of the vlans. I am not sure how best to achieve this.
The WLC SFP port will negotiate to only 1Gb and nothing less. You'll need a GLC-TX module to enable to connect an ethernet cable from the Linksys to WLC.
Configuration Guides
Similar Messages
-
I am trying to install photoshop elements from the shop bought card. After I put in redemption code the yellow line came up with "redemption is not available at the moment". What do I do? Please help! Many thanks
There's been a few of these today. I think there must be a problem with the redemption server and you probably just need to wait a while and try again.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Configuration file/uam/model/common/bc4j.xcfg is not found in the classpath
hi when am running my jspx page am geting this error , am in jdeveloper 11.1.1.6.0
Configuration file /uam/model/common/bc4j.xcfg is not found in the classpath
my log error is
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Configuration file /uam/model/common/bc4j.xcfg is not found in the classpath.
oracle.jbo.ConfigException: JBO-33001: Configuration file /uam/model/common/bc4j.xcfg is not found in the classpath.
at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:467)
at oracle.jbo.common.ampool.PoolMgr.loadConfiguration(PoolMgr.java:600)
at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:526)
at oracle.adf.model.bc4j.DCJboDataControl.findApplicationPool(DCJboDataControl.java:572)
at oracle.adf.model.bc4j.DCJboDataControl.initializeSessionCookie(DCJboDataControl.java:396)
at oracle.adf.model.bc4j.DCJboDataControl.initializeJboSession(DCJboDataControl.java:310)
at oracle.adf.model.bc4j.DataControlFactoryImpl.createSessionInternal(DataControlFactoryImpl.java:220)
at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:130)
at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:167)
at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1056)
at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1566)
at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1438)
at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1398)
at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1189)
at oracle.adf.model.BindingContext.get(BindingContext.java:1139)
at oracle.adf.model.binding.DCParameter.evaluateValue(DCParameter.java:82)
at oracle.adf.model.binding.DCParameter.getValue(DCParameter.java:111)
at oracle.adf.model.binding.DCBindingContainer.getChildByName(DCBindingContainer.java:2713)
at oracle.adf.model.binding.DCBindingContainer.internalGet(DCBindingContainer.java:2761)
at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)
at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:304)
at oracle.adf.model.binding.DCBindingContainer.evaluateParameterWithElCheck(DCBindingContainer.java:1458)
at oracle.adf.model.binding.DCBindingContainer.findDataControl(DCBindingContainer.java:1588)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.getDataControl(JUCtrlActionBinding.java:566)
at oracle.adf.model.binding.DCInvokeAction.refresh(DCInvokeAction.java:28)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3273)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:270)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3204)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)
at oracle.adf.controller.v2.lifecycle.Lifecycle$2.execute(Lifecycle.java:137)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:197)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:23)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:238)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:274)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Configuration file /uam/model/common/bc4j.xcfg is not found in the classpath.
oracle.jbo.ConfigException: JBO-33001: Configuration file /uam/model/common/bc4j.xcfg is not found in the classpath.
at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:467)
at oracle.jbo.common.ampool.PoolMgr.loadConfiguration(PoolMgr.java:600)
at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:526)
at oracle.adf.model.bc4j.DCJboDataControl.findApplicationPool(DCJboDataControl.java:572)
at oracle.adf.model.bc4j.DCJboDataControl.initializeSessionCookie(DCJboDataControl.java:396)
at oracle.adf.model.bc4j.DCJboDataControl.initializeJboSession(DCJboDataControl.java:310)
at oracle.adf.model.bc4j.DataControlFactoryImpl.createSessionInternal(DataControlFactoryImpl.java:220)
at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:130)
at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:167)
at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1056)
at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1566)
at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1438)
at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1398)
at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1189)
at oracle.adf.model.BindingContext.get(BindingContext.java:1139)
at oracle.adf.model.binding.DCParameter.evaluateValue(DCParameter.java:82)
at oracle.adf.model.binding.DCParameter.getValue(DCParameter.java:111)
at oracle.adf.model.binding.DCBindingContainer.getChildByName(DCBindingContainer.java:2713)
at oracle.adf.model.binding.DCBindingContainer.internalGet(DCBindingContainer.java:2761)
at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)
at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:304)
at oracle.adf.model.binding.DCBindingContainer.evaluateParameterWithElCheck(DCBindingContainer.java:1458)
at oracle.adf.model.binding.DCBindingContainer.findDataControl(DCBindingContainer.java:1588)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.getDataControl(JUCtrlActionBinding.java:566)
at oracle.adf.model.binding.DCInvokeAction.refresh(DCInvokeAction.java:28)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3273)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:270)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3204)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)
at oracle.adf.controller.v2.lifecycle.Lifecycle$2.execute(Lifecycle.java:137)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:197)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:23)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:238)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:274)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)i follow this http://mrk-group.blogspot.com/2012/06/bc4jxcfg-is-not-found-in-classpath.html and remove this
but now am geting this error Object AppModuleDataControl of type DataControl is not found.
the log error is
<DCBindingContainer> <internalRefreshControl> [968] **** refreshControl() for BindingContainer :ocompanyofficerdetails_bc_1
<DCUtil> <findSpelObject> [969] DCUtil, returning:oracle.adf.model.adapter.AdapterDCService, for OrgValidationBean
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Object AppModuleDataControl of type DataControl is not found.
oracle.jbo.NoObjException: JBO-25003: Object AppModuleDataControl of type DataControl is not found.
at oracle.adf.model.binding.DCIteratorBinding.getDataControl(DCIteratorBinding.java:2424)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.getDataControl(JUCtrlActionBinding.java:592)
at oracle.adf.model.binding.DCInvokeAction.refresh(DCInvokeAction.java:28)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3273)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:270)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3204)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)
at oracle.adf.controller.v2.lifecycle.Lifecycle$2.execute(Lifecycle.java:137)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:197)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:23)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:238)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:274)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
my databinding.cpx is
Edited by: ADF112 on 2012/10/10 1:22 PM -
HELP!!!! My iPOD when trying to sign in to GAMES it says You are not connected to the Internet. Online functionality is not available. HELP!!!!!!!!!!!!!!!!!!
We (my son and me) Setting's we changed to GOOGLE like you said. Listen, we are new tothis and trying very hard to get it to operate. Had it since last Wednesday and still trying to get it to operate. I know it will take time, but it VERY upsetting.
-
I can only print the first few lines of an e-mail, even when it is on "Full View" on my screen. Moreover, it prints with very small print that is hard to read and also contains additional material on the screen that is not part of the e-mail.
== This happened ==
Every time Firefox opened
== Since the first day I started using FirefoxI talked to Adobe Support tonight and found this issue to be a known problem with some of the Adobe Cloud products when using older hardware, in this case the C782.
So, we found a workaround. Unfortunately the work around isn’t efficient and adds more steps to their normal printing routine
Open InDesign and create, modify delete the card
Select FileàExport
A window will appear. Pick the location you wish to save the file
Once the File is saved another window will appear
“EXPORT Adobe PDF”
An Export to Adobe PDF window will appear. Accept all defaults. MAKE CERTAIN “VIEW PDF
After EXPORTING” is CHECKED
Select Export
Once EXPORT is complete the file will open automatically in Adobe Acrobat
Most likely the screen will be very large
Select the + - sign at the top of the page to adjust the page size to view the image
Select FileàPrint
The Print window will appear
Select the printer from the drop down
# of COPIES is just below Printer
Select OK
I hope this helps anyone who is having similar issues
Thanks -
Trying to get a refund on an app that do not work, but the report a problem button is grey out
Hi
I'm trying to get a refund on an app that do not work, but the report a problem button is gray out & Apple wants £20.00 for support
where do I go from here
ThanksTo report a problem less than 90 days:
http://reportaproblem.apple.com
Sign in with the AppleID and Password used for the purchase.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
To report a problem greater than 90 days:
http://www.apple.com/support/itunes/store -
My iPod touch was recently stolen and I have been trying to find it on iCloud but sadly it has not connected to the internet at all so I have not been able to track it.What should I do?
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I live in Australia and I am trying to buy an album by SNSD, a Kpop group. It is not available on the Australian iTunes. All of their other albums are.
Why is this and is there a way I can buy it off the American store? (The album is called The Boys)Well how much does the album cost? Because I have an issue with this except I live in America and I wish to purchase something from the Australian store... perhaps I can gift you your album and you could gift me my album.
-
I am by no means a SharePoint developer, but I really wanted to customize the discussion board for my site - so I found this link: http://www.codeproject.com/Articles/733164/How-to-create-HelpDesk-on-SharePoint-Online
I added the columns, like the article said, and then completed the section "Modification of the discussion board views". I skipped the workflow stuff because while I think it would be useful I wanted to make sure I could get
the actual customization of the discussion board to work first.
My Problem (Just to preface - I followed the above instructions, including disabling the Minimal Download Strategy):
When I clicked into my discussion board list, I was able to get it to look and function as described for both the subject and flat views. However, when I click on the Subject, from the Discussion Board Web Part on my Home Page, it does not redirect into the
Discussion Board List Flat View. Instead, it tries to open the root folder from the Home Page while still using the subject view. The outcome being an empty discussion board on the Home Page.
So I decided to create a whole new discussion board to see if that one would work, when I inserted a new Discussion Board Web Part into the Home Page, newly created from the app menu, it used the same custom JS file(plumTickets), even though I never linked
the discussion board to the JS file. Of course when I went into the newly created Discussion Board list it opened as it does OOTB.
I am so close it having this work like I have been envisioning. I just need users to be able to click on a discussion subject from the Home Page and be redirected to the list view of the parent folder (I think that is the correct terminology,
but it may not be) so they would be able to see any replies and be able to reply. Please Help Me!!!
I truly appreciate any help you are able to provide, thank you!I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question. -
I am trying to scan a document, but my printer utility will not give me the option to scan.
I am trying to can a document on my computer. However, when I bring up the printer utility it does not give me the option to scan. I have a laptop that does allow this option, but I don't want to go through the hassle of downloading to one device and emailing to another. HELP!!!
My experience, albeit slightly different, is that the scan functionality available from an Epson XP-600 is less on my iMac 21.5" than on an old Dell machine that ran on Microsoft. I suspect it's because the majority of home computers & laptops run on Microsoft platforms and this gets reflected in the amount of programming effort put in by printer/scanner manufacturers.
-
The iPad doesn't seem to want to set up an email for a "group" in my Contacts. When I type the name of a group in the "To:" line of a new message on my iMac, all the email addresses of the group automatically appear. Not so with my iPad. Help?
Apparently Groups are not supported in the Mail App on the iPad. Read this thread and see Michael Morgan's post for a workaround.
https://discussions.apple.com/message/13084823#13084823 -
I tried to restore my iPhone 3G and I get a message that I am not connected to the internet but, I can barouse on the internet with my search engins.
It's hard to tell what password you are referring to. But my guess is you are being asked for the password to the iPhone's backup you created in iTunes. It sounds like you chose to encrypt the backup.
If that is the case, the following applies:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from http://support.apple.com/kb/HT4946 -
I have tried uninstalling and re-installing iTunes and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.
When I click on the store it just never opens, I do not receive any message. I try to "refresh the page" and nothing. While having the store selected I go to "help" and check for updates and i get a message; "The iTunes updatte server could not be contacted" and it prompts me to check my internet connection which is fine. None of the items under the "Store" respond with anything.
I ran a iTunes Diagnostics/ Under "Which Tests do you want to run" I check only "Network Connections" and the results that I receive is...
Network connectivity:
Network interfaces, verified
iTunes Store connectivity:
Internet connection, verified
Secure link to iTunes Store, FAILED
Does this help?
Maybe you are looking for
-
Attribute Order in generated WSDL
Hi, Is it possible to have autotype or servicegen maintain the order of my attributes as defined in my input schema? The WSDL file generated by the weblogic tasks is alphabitizing the input attributes and this is leading to an interoperatiblity issue
-
Hi, How to configure to allow the bank account field (BANKN) in IT0009 accepting letters as bank account? Regards, Jim
-
Is it possible to do a L-Cut in iMovie for iOS?
I would like to start the audio of the second clip at the end of the first clip. Is it possible to do such a L-Cut in iMovie on my iPad? Thanks for answers, Thomas
-
Accidentally removed driver for 8600 in Macbook Air Yosemite now unable to install driver again
Please help. I accidentally remove this printer for a blind child using this printer exclusively. Now when I downloaded the software for the 8600 All in One it does not show up the printer at all. What can I do? Thanks
-
Using PCSCJCTerminal to find the readers
Hi, there is a very strange thing that has happenned. I am trying to develop an off-card application, that uses the jpcsc.dll (not the jct.dll) to make it application portable accross the platforms. Thus, i have to use PCSCJCTerminal class, that work