Trying to configure firewall rule but acl-drop is denied...what is my issue?
I am trying to allow ip 162.213.47.1/24 and Ranges below.
Firewall must allow access to our MarcomCentral® Servers
CIDR Format: 162.213.47.0/24
Netrange Format (Range of IP addresses): 162.213.47.1-254
If desired ports can be restricted to 80 and 443 (required for traffic on internet)
I am trying to get this company PTI that has the 162.213.47.0/24 address's to be able to access our outside network and pass data through.
After setting up the rules I can that I am getting hits so data is moving. However when running a packet trace the acl-drop is denied by the #13 configured rule. I dont understand why my rule isn't working. It should allow those IP's to pass data to our side.
could you try to issue a different packet tracer as follows:
packet-tracer input outside tcp 162.213.47.129 1234 <your public IP> 80 detail
If you are trying to allow web access via 80 and 443 to your internal servers, then you need to also make sure that they have static NAT and that the ASA has a route to their subnet if it is not directly connected to the ASA.
Please remember to select a correct answer and rate helpful posts
Similar Messages
-
Ipad 1st gen. Safari cannot open page because address is invalid. I get this trying to download apps from itunes, infact it will do this under any variable. I have tried copy paste in url but it doesn't matter what i try, safari doesnt allow anyway i try. I have searched answers to this but to no avail.
LeighHi Demo,
Yes, I have not made myself clear, I apologise.
I have tried downloading apps from itunes in order to set up a game for my son, when I go to click on a link, be this in itunes, or on the web, Safari revolts back informing the address is invalid. I read by coping a link and pasting into the URL, this would do it, but not so.
My goal then, is to install Minecraft for my son, I would then download an app to allow this but I am unable to get this far due to Safari insulting the address I ask it to go to
The iPad is first generation
OS 5.1.1 Software up to date.
Thank you in advance for your time -
I've been pitching!!!!!!!!!!! I bought an iphone 4 8gb but when I installed the 7.0.4 version, it asked me a password icloud, I tried to call the seller but he don't reply .what I do: (
The seller has disappeared from
sight i am very sad and put it everything I have money and I am poor, and I do not know him, because I bought a used please, please hel
<Personal Information Edited by Host> -
ı couldt manage to download iOS 5.1 Software Update . system trying to connect to server but download don't start , what would be reason?
download with itunes, or with one of your devices, and re-try, most causes it the update server it self.
-
I purchased Adobe Pro XI last February. I have tried to reinstall it and I keep getting the message that I have a valid serial # but no qualifying product. What is the issue?
Hey robertb86490977,
The reason why you are getting this prompt is because you are trying to install an upgrade version.
During the upgrade, you will need to enter serial number twice.
The first time, you need to enter the serial number of the actual product that you have purchased.
The second time, you need to enter serial number for the previous version that you had.
So, please enter serial number of the previous version at the second prompt.
Let me know if you need further assistance.
Regards,
Anubha -
Hi, I have Mac Book It currently at 10.6.8 I want know how to recover the FileVault Password? I tried /Library/Keychains/FileVaultMaster.keychain but it say permission denied when i'm the admin account
Hi BobRz,
As this is a new issue for me, I believe I had the incorrect approach, maybe you can help me. What I want to do is recover a few files in my desktop, and some information i had on the iCal application and the Mail application as well.As I do not want to do a full migration into this computer (which is not mine) I believe that starting the damaged MBP in Target mode should allow me to search and cop the files I need. But:
1. Can I open the Ical and mail apps to look for the info I need while reading it as an external HD ?
2. Do the target machine (my friends) still need to be updated to ML o Mavs so that it recognizes my MBP as an external drive if starting it in Target mode ? (no migration assistant)
Thanks. -
Trying to configure survivability.tcl but no luck
Hi,
I'm trying to configure the survivability.tcl service but I can't seem to get it to work. I've followed the instructions on the CVP config/admin guide but no luck. Attached is the config from a 2811 I'm using on the LAB.
My setup:
ICM 8.5 server running Rogger, Logger, PG, CTIOS, HDS (x.x.x.82)
CVP 8.0 server running CVP call server, vxml server, media server (x.x.x.83)
UCM 8.6 call manager server (x.x.x.81)
2811 running (C2800NM-IPVOICEK9-M) 12.4(24)T5 (x.x.x.254)
4 FXO ports
I would appreciated if someone could look at the config and tell me what's wrong or point me to documentation.
The config is in the attached file.
thanksIt's a bug: CSCth50439 survivability tcl script takes 60 seconds to kick in
I opened a TAC case and the engineer found it right away.
Symptom:
In a Cisco CVP solution installation it might be observed that the survivability tcl script takes 60 seconds to kick in on the gateway when the CVP server is down or unreachable.
Conditions:
When the CVP server is down or unreachable. So far seen in CVP versions 4.1 and 7.0.2.
Workaround:
comment out the following line in survivability.tcl:
# set fsm(any_state,ev_proceeding) "StopTimer same_state"
and load the new file and service on the gateway, after that you can set the following under the survivability service to desired time in seconds to control the time it takes to start the script.
param setup-timeout
thanks again for all the help. -
help me
i use wi-fi , when i tried to use itunes i didn`t connect said "there is no sim card in your iphone"also i insert it but there is no service in my iphone and also i dont know why ??
-
no playback of videos -latest flash player installed and updated add-ons but it still dosn't work. only youtube works but no other site.
Will you not post the link to the video like I requested, or at least let us know if you can play the videos on the pages I linked to? It would prevent more random guesswork.
Firefox doesn't try to play files it can't handle. When coming across a direct link to a file that could be handled by a plug-in, but that plug-in isn't installed, Firefox would display a download prompt.<br>
That's not the issue here, where there's an unsupported format error. That suggests an MP4 file that can't be played. Even if a plug-in that can handle MP4 files were installed, Firefox probably wouldn't use it due to bug 861090.
Firefox has supported HTML5 H.264 video on Windows Vista since version 22.0. There's no point in installing the very old — and likely abandoned — Windows Media Player plug-in. -
Hello I keep getting an error when I am trying to dawnlaw OS-X an any other software why?
Are you trying to download an app that runs on OS X that's for an iPad ??
OS X is for Macs, not an iOS based device such as the iPad noted in your profile. -
I have tried network resetting, I have even done a reset of my phone and back up. Nothing seems to work. Any ideas?
Make an appointment at any Apple store.
-
None of the apps on my 5th Generation iPod touch will open. I have restored it but it still does the same thing. What should I do next?
Try restoring to factory settings (not from backup) and redownloading your content.
-
How do I update my OS X 10.5.8 to a newer version so I can update my itunes to the newest version so I can then update and back up my phone?
Click here, buy and install the DVD, and then run the 10.6.8 combo updater.
(90227) -
hello, I was using my ipod touch and locked it to go get a drink. When I came back, I couldnt even turn it on! Is my ipod broken? Or is there any way I can fix it?
Try the troubleshooting here:
iPod touch: Hardware troubleshooting -
I cannot print a webpage correctly in Firefox, but CAN in IE. What is the issue?
I have re-installed Firefox trying to correct this problem and had no success.
There are some style rules which Firefox renders correctly to screen but which it does not handle correctly in print. These bugs seem to have a low priority because many of them have been around for years.
In some cases, there is a reasonably simple workaround, but in other cases, it's simply easier to use IE or a PDF add-on.
Is the problem page one that is easily accessed without a login? In that case, do you want to post the URL for suggestions?
Maybe you are looking for
-
Creating job application page, help.
I have a job application document that people are able to type into the correct places. I was wondering how I could put this into one of my webpages so people can still type into the correct places and when they click submit their filled in applicat
-
I have lost my cd's and screen became gray i can not boot what should i do?
Hi all i have lost my cd's and screen became gray i can not boot what should i do? i have tried to reset Vram tried to run safe boot but nothing happends i have a macbook pro core 2 duo 2GB ram 160 gb hard disk
-
Hi, I have migrated over to a new iMac and am having trouble with CC. I just get a blank desktop app screen with no chance to login. I have tried the items mentioned on other forums about deleting ppm.db files and deleting OOBE folders but neither ha
-
Why can I not use mouse or keyboard to delete text?
I have encountered a strange anomaly. I have recently installed the update to OSX and iTunes, and now I have been unable to delete text or correct mistakes using the DELETE key on keyboard or the mouse itself. I can only delete with the pull down m
-
How do I turn off password at login for all users?
I want to keep separate users but I don't want a password requirement to login for any user. How do I turn off the password requirement at login altogether?