Trying to configure NFS

Hello. Im trying to configure NFS to access to some folders from another computer in my wireless network.
Ive been following the archwiki. In the server computer I ve created the folders in srv/nfs4/ . Ive mounted them with fstab. Ive edited the exports file and Ive put the rpc-idmapd.service and rpc-mountd.service to run from the startup.
But when I go to the client computer and I want to follow the first step and i execute showmount -e with my hostname, it doesnt find me anything.
Thanks

You need to run this after editing the exports file:
$ sudo exportfs -rav

Similar Messages

  • Trying to configure RedHat Enterprise 4.3 linux jumpstart server

    I am trying to configure a system under RedHat Enterprise 4.3 linux to jumpstart
    a Sun Ultra 60 and install Solaris 9. Web pages and SysAdmin 4/2005 article
    "Portable JumpStart Environment" have not addressed my problem. I am using
    Internet Systems Consortium DHCP Server V3.0.1. The bootblock is
    delivered to the sun client and executes.
    The entries in dhcpd.conf conform to those published in various Web
    pages and the article "Portable Jumpstart".
    The Solaris 9 OS distribution is exported thus:
    /wks xxx.xx.xx.0/24(ro,wdelay,no_root_squash,mountpoint)
    The load fails upon execution of .../Solaris_9/Tools/Boot/sbin/rcS
    I think the problem may be with NFS. The mount request of the
    exported filesystem appears to work:
    rpc.mountd: authenticated mount request from sunxxx.xx.xx.xx:1023 for /wks/dist/sun/sparc/sunos5.9/9_404/Solaris_9/Tools/Boot (/wks)
    The first errors reported are:
    /sbin/rcS: /dev/null: cannot open
    /sbin/rcS: /dev/null cannot create
    I have captured the conversation between the linux jumpstart server and
    the Sun client using tcpdump: tcpdump -vvv -s 192 host server and client.
    I am not highly skilled at interpreting the tcpdump output; the cause of
    the failure is not obvious to me.
    I have successfully used a jumpstart server under Solaris 9 for quite some time. ISC DHCP is deployed on the Solaris jumpstart server.
    Thank you,
    D. Castellano

    While some have reported success doing this, I have heard of many failures. The common thread appears to be that when accessing device files, the Solaris client gets back something odd from the Linux NFS server.
    Certainly this was the case for every attempt I knew about from a 2.2 kernel and earlier. I have see success reports, but do not have details about exactly which kernel or NFS patches were present.
    This works fine from Network appliance and FreeBSD NFS servers, so I think there's some sticky point with the Linux NFS server that just doesn't handle the device files in the same manner.
    See this newsgroup post (and the accompanying thread). It contains some discovered issues and some Linux servers that are reported to work.
    http://groups.google.com/group/comp.unix.solaris/browse_frm/thread/448f37ee205860c1/e224fe968442d3c3
    Darren

  • I am trying to configure two WRV200 from 2 different loca...

    I am trying to configure two WRV200 from 2 different location and ADSL
    accounts. One location has PPPoE and the other has PPPoA. Both of it are
    having a Speedtouch 356 6V modem. The router which using PPPoE and having a DDNS from TZO.com has no problem with the Quick VPN but the router which using a PPPoA connection could not able to connect even the quick VPN.
    There is an option to ridirect the Public IP of Speedtouch to other network device and I manage to configure it and now my router who is having a PPPoA connection has a Public IP. But still the same problem VPN still not working.
    Is there any chance that I could make this router work with the PPPoA connection. I will really appreciate if somebody could help me with this problem.

    Sorry for making you confuse. Here is the VPN log details of the 2 routers.
    Router 1:
    000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
    000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 5s; rekey_fuzz: 100%; keyingtries: 5
    000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+PFS+UP+AGGRESSIVE; prio: 24,24; interface: eth0; 000 "TunnelA": dpd: action:hold; delay:30; timeout:120;
    000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
    000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
    000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
    000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
    000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
    000 #12: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 9s; nodpd
    000 #12: pending Phase 2 for "TunnelA" replacing #0
    Router 2:
    000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
    000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 3
    000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+UP+AGGRESSIVE; prio: 24,24; interface: ppp0;
    000 "TunnelA": dpd: action:restart; delay:30; timeout:120;
    000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
    000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
    000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
    000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
    000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
    000 #3: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 8s; nodpd
    000 #3: pending Phase 2 for "TunnelA" replacing #0
    Hope this could help you.

  • Error trying to configure ADS for printing from BW reports

    hi all,
    i am trying to configure ADS for printing off reports from the BW portal. I am using BI 7.0 (BW Portal version 7.0 SP10) and am getting the following error i nthe default trace file.
    #1.5#00187177BCAA008D000000DD0000144C00043EE522456586#1195053750220#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1678##BWD#PASS.TEST                       #B373727691C24C2FADD8534371BB536E#SAPEngine_Application_Thread[impl:3]_28##0#0#Fatal#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:216)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         ... 28 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 42 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 44 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    #1.5#00187177BCAA008D000000E00000144C00043EE522456FA1#1195053750220#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.application.message.impl.MessageBase#PASS.TEST#1678##BWD#PASS.TEST                       #B373727691C24C2FADD8534371BB536E#SAPEngine_Application_Thread[impl:3]_28##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    com.sap.ip.bi.base.exception.BIBaseRuntimeException ERROR
    com.sap.ip.bi.base.exception.BIBaseRuntimeException
    Log ID: 00187177BCAA008D000000DD0000144C00043EE522456586
    Initial cause
    Message: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
    Stack trace: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    Message: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    Stack trace: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:216)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         ... 28 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 42 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 44 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    com.sap.ip.bi.base.exception.BIBaseRuntimeException ERROR
    com.sap.ip.bi.base.exception.BIBaseRuntimeException#
    #1.5#00187177BCAA0084000000120000144C00043EE523772516#1195053770252#com.sap.ip.bi.export.xfa.impl.PDFConverter#sap.com/irj#com.sap.ip.bi.export.xfa.impl.PDFConverter#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error##Plain###EXPORT XFA calcTemplate=Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out#
    #1.5#00187177BCAA0084000000130000144C00043EE523772FEE#1195053770252#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error##Plain###Exception caught: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
    com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:403)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:97)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:217)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:2735)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:2478)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2432)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2054)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:931)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:873)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:324)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 51 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 53 more
    #1.5#00187177BCAA0084000000140000144C00043EE523773518#1195053770252#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Fatal#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:403)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:97)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:217)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:2735)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:2478)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2432)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2054)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:931)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:873)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:324)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 49 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 51 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 53 more
    #1.5#00187177BCAA0084000000170000144C00043EE5237744D3#1195053770252#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/irj#com.sap.ip.bi.base.application.message.impl.MessageBase#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001#

    Hi Glenn,
    i faced the same problem
    did you solve yours meanwhile ?
    regards,
    Carsten

  • OIM is not able to Restart the Domain when I am trying to configure it with the Config.sh

    Hi,
    I am a newbee here. Below is the complete details about my problem:
    I have installed WLS1211 (64-Bit) on OEL 6.3 OS & also installed the OIM 11.1.1.7 (64-Bit) on the same machine.
    When I am trying to configure the OIM (using config.sh file), system fails to restart the domain & in turn fails the configuration. I navigated to the domain created for OIM and verified that log file displays following error:
    ####<Sep 6, 2013 7:41:16 PM IST> <Info> <Server> <blr2211427> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676195> <BEA-002609> <Channel Service initialized.>
    ####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676216> <BEA-000415> <System has file descriptor limits of soft: 65,536, hard: 65,536>
    ####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676218> <BEA-000416> <Using effective file descriptor limit of: 65,536 open sockets and files.>
    ####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676218> <BEA-000406> <PosixSocketMuxer was built on Apr 24 2007 16:05:00>
    ####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676238> <BEA-000436> <Allocating 3 reader threads.>
    ####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676238> <BEA-000446> <Native I/O enabled.>
    ####<Sep 6, 2013 7:41:16 PM IST> <Info> <IIOP> <blr2211427> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676483> <BEA-002014> <IIOP subsystem enabled.>
    ####<Sep 6, 2013 7:41:20 PM IST> <Error> <Security> <blr2211427> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476680681> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
    ####<Sep 6, 2013 7:41:20 PM IST> <Critical> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680682> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
    weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:148)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
        at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:170)
        at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
        at java.lang.Class.newInstance(Class.java:374)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:148)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
        at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2984)
        at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
        at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
        at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
        at java.lang.Class.newInstance(Class.java:374)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:148)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
        at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:406)
        at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:352)
        at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:122)
        at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:88)
        at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:164)
        at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:91)
        at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:68)
        at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
        at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
        at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
        at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
        at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
        at oracle.security.jps.internal.policystore.PolicyUtil$3.run(PolicyUtil.java:2956)
        at oracle.security.jps.internal.policystore.PolicyUtil$3.run(PolicyUtil.java:2950)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2950)
        at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
        at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
        at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
        at java.lang.Class.newInstance(Class.java:374)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:148)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    ####<Sep 6, 2013 7:41:20 PM IST> <Notice> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680728> <BEA-000365> <Server state changed to FAILED.>
    ####<Sep 6, 2013 7:41:20 PM IST> <Error> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680728> <BEA-000383> <A critical service failed. The server will shut itself down.>
    ####<Sep 6, 2013 7:41:20 PM IST> <Notice> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680735> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
    ####<Sep 6, 2013 7:41:20 PM IST> <Info> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680754> <BEA-000236> <Stopping execute threads.>
    When I tried to google it to find some information I found that I need to provide full access (0777) to the cwallet.sso file available under the MW_HOME\user_projects\domains\domain_name\config\fmwconfig\bootstrap\ location. I did this but was not able to succeed.
    I followed following link: http://www.techpaste.com/2012/04/jpsruntimeexception-jps-06514-opening-file-based-keystore-failed/
    Also tried other solutions mentioned there but non worked.
    Please help.

    have you tried taking the backup of keystore.xml and cwallet.sso file, delete them and then restart admin server?

  • Trying to configure a Win 2003 Server to use TLS server authentication . . .

    I am trying to
    configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
    Method 2: By using the Certificate Request Wizard
    The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
    Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
    You want to request a certificate from an Enterprise Certification Authority.
    You want to request a certificate that is based on a template where the subject name is generated by Windows.
    You want to obtain a certificate that does not require administrator approval before the certificate is issued.
    To obtain a certificate, follow these steps:
    Click Start, click Run, type mmc, and then click OK.
    On the File menu, click Add/Remove Snap-in.
    Click Add, click Certificates, and then click Add.
    Click Computer account, and then click Next.
    If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
    computer, and then type the name of that remote computer in the Another computer box.
    Click Finish.
    In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
    Snap-in dialog box.
    Under Console Root, click Certificates (Local Computer).
    Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
    On the View menu, click Options.
    In the View Options dialog box, click Certificate purpose, and then click OK.
    In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
    In the Certificate Request Wizard that starts, click Next.
    In the Certificate types list, click Server Authentication, click to select the Advanced check box,
    and then click Next.
    In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
    I get as far as step 11 and I get the error message:-
    The wizard cannot be started because of one or more of the following conditions:
    - There are no trusted certification authorities (CAs) available.
    - You do not have the permissions to request certificates from the available CAs.
    - The available CAs issue certificates for which you do not have permissions.
    This is covered in KB 927066 – see below:-
    To resolve the problem, follow these steps:
    Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
    To do this, follow these steps:
    Click Start, click Run,
    type Dsa.msc, and then click OK.
    In the left pane, click the Users container.
    Verify that the CERTSVC_DCOM_ACCESS group is in the right
    pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
    Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
    Domain Users
    Domain Computers
    If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4. 
    Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
    controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
    do not have sufficient DCOM permissions.
    Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
    authority.
    Click Start, point to Program,
    point to Administrative Tools, and then click Component Services.
    Expand the Component Services node.
    Expand the Computers node.
    Right-click the My Computer node, and
    then click Properties.
    Click the COM Security tab.
    Under Access Permission, click Edit
    Limits.
    Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
    Remote Access permissions, and then click Cancel.
    Under Launch and Activation Permissions, click Edit
    Limits.
    Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
    Remote Activationpermissions, and then click Cancel.
    Click Cancel, and then close the Component
    Services console.
    Settings may be incorrect if any one of the following conditions is true:
    The CERTSVC_DCOM_ACCESS group does not exist.
    The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
    The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
    If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
    certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
    net stop certsvc
    net start certsvc
    Repeat steps 1 through 3 to verify that all the settings are correct.
    Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
    The only part of the above instructions which I have not been able to complete is:-
    “you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
    When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

    Hi Nick,
    Have you successfully set up an enterprise CA?
    If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
    Best Regards,
    Amy

  • Error message while i am trying to configure app server domain in PT 8.48.1

    Team,
    I am getting below error message while i am trying to configure app server domain in PT 8.48.16. I have uninstall TUXEDO 8.1 and then install 3 times. But, no luck.
    Enter domain name to create
    :CRPROD
    Merging old domain configuration file with new template file...
    source C:\Documents and Settings\psadmin\Desktop\psappsrv.cfg
    template E:\psoft\PT848\appserv\large.cfx
    destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
    Creating domain folder CRPROD...
    Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
    psappsrv.ubx
    Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
    Copy psasnt.val to CRPROD1\psappsrv.val failed!
    Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
    Copying Jolt repository file...
    Copy jrepository to CRPROD1\ failed!

    I get below error when i try to create a domain from import a file option.
    PeopleSoft Import Application Server Configuration
    1) Import from file
    2) Import from application domain
    q) Quit
    Command to execute (1-2, q) : 1
    Enter full path to configuration file
    :E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
    Enter domain name to create
    :CRPROD1
    Application Server domain CRPROD1 already exists...
    1) Replace existing domain
    2) Enter different domain name
    q) Quit
    Command to execute (1-2, q) : 2
    Enter different name for domain: CRPROD
    Merging old domain configuration file with new template file...
    source E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
    template E:\psoft\PT848\appserv\large.cfx
    destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
    Creating domain folder CRPROD...
    Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
    psappsrv.ubx
    and when i try to crearte a domain with " create a domain " option , i got below error message.
    PeopleSoft Application Server Administration
    1) Administer a domain
    2) Create a domain
    3) Delete a domain
    4) Import domain configuration
    q) Quit
    Command to execute (1-4, q) : 2
    Please enter name of domain to create :CRPROD1
    Configuration templates:
    1) developer
    2) large
    3) medium
    4) small
    Select config template number: 2
    Creating domain...
    Copying application server configuration files...
    Stripping Annotations...
    Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
    Copy psasnt.val to CRPROD1\psappsrv.val failed!
    Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
    Copying Jolt repository file...
    Copy jrepository to CRPROD1\ failed!
    Domain created.
    Would you like to configure this domain now? (y/n) [y] :Y
    Error opening file 'psappsrv.ubx':
    Error opening file 'psappsrv.ubx':
    Quick-configure menu -- domain: CRPROD1
    Features Settings
    ========== ==========
    Actions
    =========
    1) Load config as shown
    2) Custom configuration
    h) Help for this menu
    q) Return to previous menu
    HINT: Enter 3 to edit DBNAME, then 1 to load

  • In illustratorCC2014, I tried to configure the use of the GPU of the new features.  I have installed the java.  I have a 3D set in navidia control panel.  illustrator CC2014 will not start.  I have not repaired even if you restored in navidia control pane

    In illustratorCC2014, I tried to configure the use of the GPU of the new features.
    I have installed the java.
    I have a 3D set in navidia control panel.
    illustrator CC2014 will not start.
    I have not repaired even if you restored in navidia control panel.
    I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

    In illustratorCC2014, I tried to configure the use of the GPU of the new features.
    I have installed the java.
    I have a 3D set in navidia control panel.
    illustrator CC2014 will not start.
    I have not repaired even if you restored in navidia control panel.
    I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

  • ORA-24327 error when trying to configure Oracle JDriver 2.0 on Commerce Server 3.5 SP1 on WLServer 6.0 SP2

    When I try to install and configure the Oracle JDriver v.2.0 to work with Commerce
    Server 3.5 SP1 and WebLogic Server 6.0 SP2, on starting up the commerce server,
    I get the exceptions that follow this message. I cannot run the dbping utility
    because it says it cannot find the BEA license file to verify that JDriver is
    licensed for use. I looked over previous discussion threads on this particular
    Oracle error, and the problem in the previous cases appears to have been use of
    the wrong TNS name. I am referencing the same TNS name that is in my server's
    tnsnames.ora file. I can connect to the database using SQLNet and the same connection
    parameters that I have set up in weblogic. My Oracle home directory is set to
    the directory just above the client install. I am trying to configure Commerce
    Server on a Sun SPARC system running Solaris 8. Any help would be greatly appreciated.
    Thanks,
    Jon Morgan
    ---------- LOGIN ERROR CODE: 24327
    java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
    (WEBLOGIC/********@ARBR.intelixinc)
    at weblogic.db.oci.OciConnection.getLDAException(OciConnection.java:161)
    at weblogic.jdbcbase.oci.Driver.connect(Driver.java:92)
    at com.beasys.commerce.axiom.contact.security.RDBMSDelegate.init(RDBMSDe
    legate.java:194)
    at com.beasys.commerce.axiom.contact.security.RDBMSDelegate.<init>(RDBMS
    Delegate.java:139)
    at com.beasys.commerce.axiom.contact.security.RDBMSDelegate$DFactory.get
    Instance(RDBMSDelegate.java:975)
    at com.beasys.commerce.util.Pool.<init>(Pool.java:37)
    at com.beasys.commerce.axiom.contact.security.RDBMSRealm.<init>(RDBMSRea
    lm.java:127)
    at java.lang.Class.newInstance0(Native Method)
    at java.lang.Class.newInstance(Class.java:237)
    at weblogic.security.acl.Realm.getRealm(Realm.java:84)
    at weblogic.security.acl.Realm.getRealm(Realm.java:62)
    at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
    a:265)
    at weblogic.security.SecurityService.initialize(SecurityService.java:123
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
    at weblogic.Server.main(Server.java:35)
    <Aug 7, 2001 11:50:29 AM EDT> <Emergency> <Server> <Unable to initialize the ser
    ver: 'Fatal initialization exception
    Throwable: java.lang.IllegalAccessError: com.beasys.commerce.axiom.contact.secur
    ity.RDBMSException: realm initialization failed, action 'Driver.connect', - wit
    h nested exception:
    [java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
    - (WEBLOGIC/********@ARBR.intelixinc)]
    java.lang.IllegalAccessError: com.beasys.commerce.axiom.contact.security.RDBMSEx
    ception: realm initialization failed, action 'Driver.connect', - with nested
    ex
    ception:
    [java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
    - (WEBLOGIC/********@ARBR.intelixinc)]
    at weblogic.security.acl.Realm.getRealm(Realm.java:91)
    at weblogic.security.acl.Realm.getRealm(Realm.java:62)
    at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
    a:265)
    at weblogic.security.SecurityService.initialize(SecurityService.java:123
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
    at weblogic.Server.main(Server.java:35)
    '>
    The WebLogic Server did not start up properly.
    Exception raised: java.lang.IllegalAccessError: com.beasys.commerce.axiom.contac
    t.security.RDBMSException: realm initialization failed, action 'Driver.connect',
    - with nested exception:
    [java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
    - (WEBLOGIC/********@ARBR.intelixinc)]
    java.lang.IllegalAccessError: com.beasys.commerce.axiom.contact.security.RDBMSEx
    ception: realm initialization failed, action 'Driver.connect', - with nested
    ex
    ception:
    [java.sql.SQLException: Error while trying to retrieve text for error ORA-24327
    - (WEBLOGIC/********@ARBR.intelixinc)]
    at weblogic.security.acl.Realm.getRealm(Realm.java:91)
    at weblogic.security.acl.Realm.getRealm(Realm.java:62)
    at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
    a:265)
    at weblogic.security.SecurityService.initialize(SecurityService.java:123
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception

    Wrong Forum, you want the APEX LISTENER support forum, this is the APEX support forum..
    Thank you,
    Tony Miller
    LuvMuffin Software

  • Trying to configure Portal to run off the network

    Hi all,
    I am trying to configure Oracle Portal 3.0.9.8.2 to run off the network. I have taken all of the recommended steps in terms of configuring hostname, using a static IP, running and checking the ssoodatan script, updating the hosts file, and configuring a loopback adapter, but can still not make it work. The Portal works and functions fine when connected to the network, but as soon as disconnected from the network Portal returns
    Error: Timeout occurred whilst retrieving page meta data 0 ms.
    or
    Sometimes it will display the banner, but the Portlets and the Providers will instantly timeout. I have cranked up the timeout levels of JServ and the Providers but to no avail. I have put the recommended timeout, stall, requesttime, buffer, minStall, minTimeout in the zone.properties file, but no luck.
    I have noticed within the jserv.log the error message below. The link that jumps out at me is UnknownHostException: www-proxy.us.oracle.com. I did have my proxy server set at one time, but I erased it from the global settings page, and I ran the procedure I found somewhere on this discussion board to make sure it was set back to null. When I run the diag.cmd program it shows my proxy server being empty. Where could this be picking this up from, I also have proxy servers turned off in my browsers. Any suggestions or help??
    13/02/2002 16:04:08:752 PST] page/JNI: Exception when trying to connect in 1.
    [13/02/2002 16:04:08:752 PST] page/Timeout occurred, label=147 url=http://jstrada-lap.us.oracle.com/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet time=10ms
    [13/02/2002 16:04:08:762 PST] page/ContentFetcher Unexpected Exception, name=content-fetcher0
    java.net.UnknownHostException: www-proxy.us.oracle.com
         at java.net.InetAddress.getAllByName0(InetAddress.java:575)
         at java.net.InetAddress.getAllByName0(InetAddress.java:544)
         at java.net.InetAddress.getAllByName(InetAddress.java:537)
         at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java, Compiled Code)

    I think you must add an entry to your /etc/hosts file, as follows:
    127.0.0.1 noa noa
    and create a vhost entry on /etc/httpd/conf/extra/httpd-vhosts
    <VirtualHost *:80>
    ServerName noa
    DocumentRoot "/srv/http/"
    <Directory "/src/http/">
    Options Indexes FollowSymLinks
    AllowOverride None
    Require all granted
    </Directory>
    </VirtualHost>
    Although I'm not sure if the vhost is actually necesary, but it won't harm.
    pd: if you use vhosts, remember to uncomment "Include conf/extra/httpd-vhosts.conf" con /etc/httpd/conf/httpd.conf and restart apache
    # systemctl restart httpd

  • I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties​, am I looking in the wrong place?

    I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
    I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
    MAX says it recognizes all the cards in the chassiss.

    Jeremy, Thanks for the reply.
    I tried to set up the system as DAQmx.
    I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
    It didn't seem right that the system should behave that way, but I pressed onward.
    I then tried to create a new DAQmx Task
    When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
    Analog>>Voltage
    Analog>>Temperature
    Ana
    log>>Strain
    Analog>>Current
    Analog>>Resistance
    Analog>>Frequency
    Analog>>Custom Voltage with Excitation
    Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
    I had included the system report of what programs I am using, etc. as attached file nireport.txt
    After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
    Which I guess it is since both configurations are now set-up in MAX.
    I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
    't come up with
    Analog input>>POSITION>>LVDT
    When I try to create a new DAQmx task.
    Thanks for the help so far! As you can probably tell I am new at this.
    Ryan
    Attachments:
    nireport.txt ‏2 KB

  • Trying to configure survivability.tcl but no luck

    Hi,
    I'm trying to configure the survivability.tcl service but I can't seem to get it to work.  I've followed the instructions on the CVP config/admin guide but no luck.  Attached is the config from a 2811 I'm using on the LAB.
    My setup:
    ICM 8.5 server running Rogger, Logger, PG, CTIOS, HDS (x.x.x.82)
    CVP 8.0 server running CVP call server, vxml server, media server (x.x.x.83)
    UCM 8.6 call manager server (x.x.x.81)
    2811 running (C2800NM-IPVOICEK9-M) 12.4(24)T5 (x.x.x.254)
         4 FXO ports
    I would appreciated if someone could look at the config and tell me what's wrong or point me to documentation.
    The config is in the attached file.
    thanks

    It's a bug: CSCth50439    survivability tcl script takes 60 seconds to kick in
    I opened a TAC case and the engineer found it right away.
    Symptom:
    In a Cisco CVP solution installation it might be observed that the survivability tcl script takes 60 seconds to kick in on the gateway when the CVP server is down or unreachable.
    Conditions:
    When the CVP server is down or unreachable. So far seen in CVP versions 4.1 and 7.0.2.
    Workaround:
    comment out the following line in survivability.tcl:
    # set fsm(any_state,ev_proceeding)              "StopTimer same_state"
    and load the new file and service on the gateway, after that you can set the following under the survivability service to desired time in seconds to control the  time it takes to start the script.
        param setup-timeout 
    thanks again for all the help.

  • HT1937 i have just downloaded a new version of Iphone software on my iphone 3 . but i'm facing problem in configuring it . also tried to configure it with itunes but it always says that there's no sim card in your phone and previously i was using same sim

    i have just downloaded a new version of Iphone software on my iphone 3 . but i'm facing problem in configuring it . also tried to configure it with itunes but it always says that there's no sim card in your phone and previously i was using same sim without any problem . need solution . kindly help .

    Hello ashharuddin,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Toggle Airplane mode On and Off.
    Try turning iPhone off and then on again.
    Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
    Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
    Restore the iPhone.
    Have a nice day,
    Mario

  • Newbie trying to configure xfi with virtual

    hi,i'm trying to configure my soundcard with virtual dj so that i can monitor through the headphones one track whilst another is playing thru the speakers. I'm not sure how to do this - have selected Asio in 'soundcard' on virtual dj - am then able to select between running master thru channels and 2, with phones thru 3 and 4 or vice versa.How do i effect this in the console launcher please?Am in audio creation mode but having no luck!?thnaksBArry

    anyone? technical support is ringing out.thanks

  • My Time Capsule has stopped working after I tried to configure an extended wifi network

    My Time Capsule was working fine until I tried to configure it with an extended bridge. Now either the amber light is solid or the solid amber comes on for awhile and then goes completely out.
    The AirPort Utility says that there is no internet connection, the DNS settings are wrong, and that the disk need to be repaired. Using Disk Utility, the Time Capsule does not even show up so that I can repair it.
    I am running OSX 10.7.5, and besides the Time Capsule I have a Vonage Motorola (VT2442-VD) for VOIP, which of course is not working because it was connected behind the Time Capsule.
    I'm in Italy and cannot call Apple directly since I now do not have phone service.
    Any suggestions how I can check/repair the Time Capsule, and then configure it properly to my satellite broadband?
    Thanks for you help.

    How old is the TC?? The LED should never go solid amber.. that indicates disk failure.
    Or completely out.. that indicates power supply failure.
    As a note you cannot extend wireless to a non apple wireless router... you can only plug in by ethernet and use the TC to create a wireless network.. this can have the same name as the main router,, same SSID in other words and same security but set to different channel..

Maybe you are looking for

  • Data Services 4.0 client cannot login to CMS

    Hi, I just installed DS 4.0 on my Windows 7 laptop.  I received the Central Management Server connectivity information from my DS administrator, but I'm not able to connect to it when I launch Designer.  The error message is very generic:  "SDK Failu

  • Designer 2013 - Design Manager: Page layout created is not showing up in Designer

    Hello everyone, I greatly need assistance. I have wasted over 1/2 a day trying to fix this issue. I have a site with a subsite. I'm customizing the subsite using the Design Manager. I've been through all of the steps and now I've created a Page Layou

  • How to get refreshed report

    Dear Friends, I have attached my report in my .aspx file. I am passing the condition through myCrystalReportViewer.SelectionFormula It was showing all record's reports those are tested in CR2008. But as soon as we have entered a new record through ou

  • Scales in Pricing

    Hi all, I am having a requirement in pricing. In the pricing, I want to have a value of a condition if the weight crosses certain limit. Ex. If the weight exceeds 100 kg, then there is a handling charge of Rs.10 per kg on the excess weight, i.e. If t

  • Exchange 2010 - Accepting Messages Above the Attachment Size Limit

    Recently we implemented a new Exchange 2010 server in a site. This site is in another country with very poor WAN connectivity.  Our standard attachment limit is 50MB (51200 kb) . Since we have put this server in place I am seeing messages get stuck i