Trying to connect 2 stereo tracks

Hello
I have 2 stereo tracks which aren't connected. I selected modify stereo pair hoping they would connect but that didn't help. I would love some help. Thanks!

Select the two audio clips.
Go to the menu Modify > Link and Toggle it OFF (the check mark next to it will go away) then on the same menu, with the clips still selected, Toggle Stereo Pair and OFF (the check mark next to it will go away).
Now go to the timeline and click and drag one of the two audio clips to the track adjacent to the other. Make sure the start and ending points are the same (this is easier with Snapping turned on).
Once you have the two tracks adjacent and in sync, select them both and toggle Stereo Pair ON.
Then select the stereo pair audio track you just created and the video it goes with and toggle Link ON.
To prevent this in the future, make sure your audio routing is set for adjacent tracks.
MtD

Similar Messages

Trying to connect Airtunes to home stereo

I'm afraid that I really have no idea of what I'm doing here....this is my situation -
I have a G5 iMac in my home office connected via Airport Express to a DSL modem (and via USB to a printer on my desk). I also have a Sony VAIO notebook (Windows XP Pro SP2) with a Belkin 802.11g wireless notebook network card that I have connected wirelessly so it can access both the printer and my ADSL modem. No problems to date with that.
I have a second Airport Express downstairs (ground floor) in the living room (my home office is on the first floor) that I have used to extend the wireless signal so my husband can connect his Mac mini and 12 inch Powerbook to the ADSL modem. His studio is across the courtyard from the living room on top of the garage (about 7 - 8 metres from the Airport Express in the living room). This works, too.
My problem arises because I have tried to connect my home stereo in the living room to 'airtunes' on my G5 iMac by using a 'home stereo cable' that I bought from my local Apple dealer. It has a 3.5mm connector on one end and two RCA connectors on the other end. (I was told by my local Apple dealer that this would be 'dead easy').
I plugged the 3.5mm connector into the Airport Express in the living room and connected the RCA connectors to my tuner/amplifier (it is an old Nakamichi RE-3). Nothing happens at all. Nothing shows up in iTunes (I'm running iTunes 6). My Apple shop said 'just plug into the Aux RCA connectors and then set your stereo to AUX' - could the problem be that my Aux connectors also say /video? The input options on the front of the machine are CD, Aux/Video, Tuner, Cassette player.
Sorry to be so ignorant - perhaps my Stereo is just too old?
Any help/suggestions would be gratefully accepted.
Cheers
Tricia

A little bit of knowledge can be a dangerous thing..... :-(((
I did some reading of the Help files and discovered a couple of basic things -
1) I had to change Preferences in iTunes to look for remote speakers connected with Airtunes
2) I had to change System Preferences/Firewall setting to check the iTunes Music Sharing box
3) I had to remember to turn on the volume control for my stereo
Result - I now have my iTunes music playing throughout the house because my stereo system (20 years old) is wired to the bedroom, bathroom and study...I love it
Cheers
Tricia

Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire. Let me know. Hope I got it right. Thanks for responding.

In Final Cut Pro X 10.1.1 I'm trying to separate left and right stereo tracks to delete left and pan right to centre. I cannot find a way to do this.

I record in stereo with a 10KHz tone down the left channel to defeat AGC on my camera and mic feed into the right channel. When I edit, I want to mute/delete the left channel and pan the right into the centre, to leave me with mono audio across both left and right. I could do this easily in FCP 6 but can find no way to do it in FCP X. I'm using the same source files. When I choose Dual Mono mode in the Audio Inspector, it mixes left and right and pushes the combined signal into both channels, giving me a mix of 10KHZ tone and audio in both left and right. Stereo mode shows me the two channels correctly with one driven hard (the tone) and the other at good voice levels. I just want to kill the left channel and pan the right to centre.
I'm converting original TOD files using MPEG Streamclip before import and definitely keeping audio as stereo.
This is driving me nuts! It should be simple and is in FCP 6. Any help greatly appreciated.
Stereo Setting
Mono Setting

Mb - If you're using FCPX 10.1.1 and Mavericks, make certain you've downloaded the most current Sony XDCAM FCPX plugin from sonycreativesortware.com unless you're using an older version of FCPX and then you'd need the previous XDCAM plugin.
You shouldn't see 8 mono tracks. There are import settings in /fCPX that you can check and I don't ask FCPX to analyze my media or seperate mono or combine stereo, etc. I like to have everything come in as it is, especially because I know what I've done with every channel, etc.
What I wrote to Ian is what I'd tell you - so please take a look at how you can make a "stereo" track that is actually two mono tracks, mono. Once you do that you can address each mono channel by itself since it needs different volume, compression, and EQ than other channels.
There are ethernet, USB, and firewire controllers that work in FCPX, but that's not the typical workflow because generally if you're getting into any amount of post audio sweetening beyond basic "staples" audio treatment, you would instead use "Roles" to export your audio to Logic or Pro Tools and do you work in those applications and then cut the final product back into your FCPX project. In Logic or Pro Tools is where you might use a controller.
In terms of automating levels, I'm not positive I know what you mean. Compressor is a nice internal Logic plugin that kind of automates levels in a way but its about compressing peaks at a threshold that you set and at a ratio of compression. So I may not understand what other automation is available unless you've exported you tracks to Logic or Pro Tools.

Video with stereo track and click track for live performance

Hello,
I have a video that was created in FCP sync'd with a stereo sound track and a click track. I need to play this video live (using projection) with the stereo track routed to the main outs and the click routed to the in-ear monitors for a performer to sync with. I have not done this before and am trying to wrap my brain around it. I'm also hoping to come up with the easiest and most reliable solution. As I understand it, this video will not be able to play back from a burned DVD, but rather will need to play back in Logic with 2 audio tracks (L/R) for the sound track and then 1 track for the click. These 3 tracks can then be routed to their required destinations from a soundcard or mixer.
Does this seem to be the best and most reliable method? I've only burned audio to video (never using a click) in FCP before and have always played back from a DVD. Now I have this live player/syncing component and am not sure of the best way to do it. I have some experience with Logic, but limited.
I really appreciate any suggestions/tips any one might have.
Thanks.

I've opened the movie (with stereo track) in QT Pro and then added the click - and now the 2 audio files are there, sync'd up.
When you say you opened the movie in QT Pro, I assume you mean the QT Pro version of Quicktime Player 7. So let's say you have the movie open in Quicktime Player 7, and you press ⌘J (Window > Show Movie Properties). And in the window that appears, hopefully you see several items listed, including Sound Track 1 and Sound Track 2. These are your two audio files, that are now part of the movie file. One of those files is your stereo soundtrack, and the other is your click. So let's assume that this is a total of 3 channels of sound (because I understand your click is mono).
Select Sound Track 1, and select the tab Audio Settings. Let's assume this is the stereo soundtrack. In the scrolling area at the bottom right of the window, under the heading Assignment, you should see Left and Right. Let's leave it that way.
Now select Sound Track 2. Under Assignment, there should be just one item listed (that is, there is only one channel in this Sound Track, if the click is mono). Under Assignment, it probably says Mono. Change that to Center.
Save the movie. We're done with Quicktime Player for now. Launch Audio MIDI Setup. It's here:
Macintosh HD/Applications/Utilities/Audio MIDI Setup
I assume you have an audio interface connected that supports at least 3 channels. In AMS, find the window (or tab, depending on your OS version) for Audio Devices. Select your audio interface. Select the Output tab, and press the button Configure Speakers. In the window that appears, select Multichannel, and change the menu selection from Stereo to 5.1 Surround.
You will probably see that "left front," "right front," and "center" are assigned to outputs 1, 2 and 3, respectively, of your audio interface. If not, make it so, and press the button Apply.
Now when you play your movie, the stereo soundtrack will appear at outputs 1 and 2 of your audio interface, and the click will appear at output 3. Now you can cable your stereo mains to 1/2 and your in-ear monitors to 3.

No audio generated from MIDI tracks, though Stereo track is armed

I know that I need to make a stereo track before exporting my MIDI patches as an audio file. However, when I tried to record the audio track (and yes, it's armed), there are no sound waves generated from the instrument patches.
I'm connecting an external MIDI synth (USB to host device) and am also using 1/4 in. audio output cables on the synth, with the 1/8 in. jack connected to my MacBook Pro's microphone plug.
Here's more info:
Software: Logic X Pro
Synth: Yamaha MO8
The Yamaha MO8 is recognized on the Audio MIDI Setup.

I'm also hearing the click track echoing on every beat. And that's all the stereo audio track will record. How do I stop it, so that the stereo audio track will record my MIDI tracks?

Help trying to bounce a mono track in place with autotune plugin

I am trying to render a vocal track which has an Antares Autotune plugin by using the bounce track in place. It works but no matter what I try, the new track is being created in stereo. The origional track is mono. What would I be doing wrong here? Thanks
James

Ah, Thank you, so you are saying that if I uncheck the Volume and Pan automation checkbox it should work. Maybe that's it then. My origional channel strip and regions are mono. I will try this and see what happens. I also noticed I don't have the last logic upgrade. I will also be upgrading. Thanks
James

HT4108 I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
If your new TV has a conventional VGA in and stereo inputs you can try this connector.
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
It won't be high resolution, but it will get you picture from iPad to TV.
Good Luck.

Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?

I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.) I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???

Downloaded your operating manual. It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection). The picture on page13 seems to be the clearest I could find:
Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
Note, if that truly is a 3.5 mm stereo jack cables are very common. In your case it would just be a cable with a 3.5 mm jack on each end.
Update:
You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?). The manual is not clear on this (page 31). Sometimes it just comes down to pushing buttons.

An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS)

Mixing Four Tracks To One Stereo Track

Hi,
In Logic 7.2.3,if I have recorded four backing vocal tracks, all doubled up, and I want them panned across the track, from left to right, is there a way that I can submix them to one stereo track, still keeping their pan positions, so I can apply processing to all of them together.
I tried doing this via a buss to aux track, but it only picked up one side of the stereo spectrum, which is no good.
I remember this was easy to do in Ableton Live, as you could directly output from one track to another track, but I cannot find this option in Logic.
Thanks,
Tristan.
Mac Pro Mac OS X (10.4.9) 3GB RAM

Send them to a bus. Buses are stereo in Logic and you can apply the same effects to the bus that you can to any track. The output from the bus is normally the main ouput (though you can change it) so it gets back into the mix.
Perhaps the easiest way is to route the I/O of the selected tracks not to Output 1/2 but to Bus 1 and do that for all your backing tracks.
Another way is to click on the Send button on the vocals track and route to Bus 1. Then ramp up the send pot, but check your levels since you are now sending both the original track and the bus to your output. If you don't want the originals to go into the mix, set the tracks to no output or use the first method I mentioned.
You'll probably want Bus 1 in your arrange window. To get it, open the track mixer, click on Global (to display all the objects in your system), scroll to to the extreme right and double click on the label Bus 1.
Hope that helps!
Pete

2 yrs worth of music on my ipod nano 5th gen just vanished while I was trying to add four new tracks.

Most of the music I've put on my ipod nano 5th gen in the last 2 years just vanished while I was trying to add four new tracks. Stuff from before that seems to be still there (I add stuff manually, not sync, and the ipod wasn't full). It was a bit glitchy as soon as I plugged it in to update - threw up a few error messages, decided to verify my ipod a couple of times, After that, once or twice itunes seemed to lose the ipod completely, although as far as the laptop was concerned it was definitely still connected, so i went for the 'safe to remove hardware' option and reconnected...
I'm guessing somewhere in the midst of whatever was going on there, something got confused or corrupted, but I have no way to tell what... Ipod seems to think it is using less of its capacity now, but I don't know whether to believe it or not!
Can I get this stuff back? It's not just stuff I bought from itunes, either - things I put on from cds have gone too. I have all the music either backed up or on cds, but I'm not in the same country as my cds right now - also rebuilding all of my playlists and trying to remember what went where is going to be a pain! Is there a quicker way than just doing it all over again?

Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081

IPhoto or Final Cut bug: export creates 19 stereo tracks attached to file!

I am exporting three slideshows from iPhoto '08 to Quicktime to be placed in a Final Cut Pro project. The first two exported fine. The longest one (just over ten minutes) exports and plays in QuickTime, but when you import to Final Cut, it mysterious has 19 stereo tracks attached, and won't play unless you remove all of those tracks (hence, no music) Again, the shorter two come in just fine with one stereo pair, as you would expect.
I installed the iPhoto update, tried again, still the same thing...

Ryan:
Is it just that one particular slideshow or will any slideshow exported and imported to FCP display that problem? Also, if you have Quicktime Pro, open the problem file with it and check to see if if contains those 19 tracks. If not, then maybe FCP is causing the issue.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Imported clips has 19 stereo tracks mysteriously added. Exported frm iphoto

Hi, I posted this on the iPhoto section, but after thinking it over, maybe it's actually an FCP 6 issue...
I am exporting three slideshows from iPhoto '08 to Quicktime to be placed in a Final Cut Pro project. The first two exported fine. The longest one (just over ten minutes) exports and plays in QuickTime, but when you import to Final Cut, it mysterious has 19 stereo tracks attached, and won't play unless you remove all of those tracks (hence, no music) Again, the shorter two come in just fine with one stereo pair, as you would expect.
I installed the iPhoto update, tried again, still the same thing...

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

Has anyone tried to connect iPad 2 to harman kardon Nova 2.0 speakers

Has anyone tried to connect iPad 2 to harman kardon Nova 2.0 speakers?

I had the same question and unfortunately the answer is no. The iPad wasn't designed to be part of a stereo system. Check Best Buy or Radio Shack even Walmart.

Trying to connect 2 stereo tracks

Similar Messages

Maybe you are looking for