Trying to connect a LOGITECH WIRELESS BOOMBOX to a macbook

hey guys - i'm wondering if anyone could give me some advice on how to fix this.  i recently bought a logitech WIRELESS boombox and cannot connect it to either my macbook (running 10.5.8).  my mac recognizes the boombox but when i try to connect it i'm prompted to enter a passkey.  obviously there is no way for me to enter the passkey into the speaker so it doesn't connect. i've been able to get this to sync very easily with both my husband and i's droid phones and his MBP so i'm kinda bummed.
i'm wondering if this is something i can fix or if i'm just not able to use this speaker with my macbook.

I've been trying for the last half hour to pair a PS3 Sixaxis controller (cechzc1u) to my iMac, without much luck, it shows up in my bluetooth menu bar and says connected; but it does not show up in my bluetooth system preferences.
I'm curious if this requires the DualShock3 (cechzc2u) to work instead; i haven't had any luck with answers on the rest of the interweb.
any ideas?

Similar Messages

  • Trying to connect a Bluetooth wireless PS3 controller to Macbook Pro

    Hello,  I've got a Macbook Pro  2.2 GHz Core i7 with 4 G Ram.  Running OS 10.7.5.  I would like to use a 3rd party PS3 controller with my Macbook.  I have a Datel Turbofire 2 wireless.  I've read about pairing wireless controllers with Macbooks, but my problem is that my macbook doesn't seem to detect the PS3 controller at all.  I don't get a pairing request and when I look for bluetooth devices, my computer does not see any.  Any suggestions?

    I've been trying for the last half hour to pair a PS3 Sixaxis controller (cechzc1u) to my iMac, without much luck, it shows up in my bluetooth menu bar and says connected; but it does not show up in my bluetooth system preferences.
    I'm curious if this requires the DualShock3 (cechzc2u) to work instead; i haven't had any luck with answers on the rest of the interweb.
    any ideas?

  • I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't!  I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected.  HELP!

    I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't!  I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected.  HELP!

    Ask the Verizon store to exchange your iPhone for a different iPhone 4.
    UPDATE - Sure, try ckuan's solution first.  Then use mine if that fails.
    Message was edited by: sberman

  • I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

    I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

    Then use multipel 99 picture slideshows. 
    You can have up to 8 or 9 slideshows per menu.  If you add a sub menu reduce that by 1 and add 8 more to the sub menu.  The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows. 
    However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD.  It just becomes a single video/movie file.  So you should not have a problem with exporting at the large size, 720 x 540,
    and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
    OT

  • My laptop continually tries to connect to HP3050 wireless even if I am not near the printer.

    HP3050 wireless printer Samsung Laptop with Win 7 SP1
    My laptop every minute or two runs a program in the background. I see an egg next to the mouse pointer. I used Process Explorer to establish that it is trying to connect to HP3050 wirelessly. This happens even if I am nowhere near the printer. It is very annoying and uses up computer resources. I have removed the printer for now and the problem is cured. How can I fix this and use the printer again?
    [email protected]

    Topgunb,
    Try re-installing the latest version of the full feature software located here:
    http://goo.gl/PTwdX
    Let me know if the issue persists. Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Is logitech wireless boombox bluetooth compatible with windows 8?

    is logitech wireless boombox bluetooth compatible with windows 8?

    No. It does not work for me. 
    But if you are willing to remove all your apps/programs it may work according to this post:
    http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/logitech-mini-boombox-will-not-go-on-line/c40c3a32-372b-47a0-ae25-16ffb0a4791b?msgId=c0e29647-40d3-422a-9051-5c98ac871038

  • Trying to connect IPAD to wireless router

    Help & advise needed. I have been trying to connect to my wireless router. I can see my network in the IPAD and when I try to join and enter my password it give me a message " incorrect password". I have reset my router 2x now and created new user & password ID.

    I am having the same problem. It is very frustrating. My lap top connects to my router just fine and my iPad can connect to other routers with no problem. PLEASE help us!

  • I have tried to connect my c310 wireless although i have connected with usb. help!

    i have tried to connect my c310 wireless although i have connected with usb.  help!
    Printer does not recognize the network name.  I have  run the setup many times with no success.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When trying to connect to the itunes store on my MacBook Pro, I get the following error message: "iTunes could not connect to the iTunes Store.  An unknown error occurred (-54) Make sure your network connection is active and try again."

    When trying to connect to the itunes store on my MacBook Pro, I get the following error message: "iTunes could not connect to the iTunes Store.  An unknown error occurred (-54) Make sure your network connection is active and try again."

    I've had the same problem for a month and yet I still cant get iTunes to work, I've heard different solutions but none have worked for me
    This may or may not work for you but its worth a try even though it didnt seem to work for me, Good Luck!
    Control Panel
    Internet Options
    Connections Tab
    Click LAN Settings
    Uncheck "Use A Proxy Server"

  • MacBook Pro 1,1. OS X 10.6.8 Trying to connect an Edirol FA-101 via FireWire, Macbook not recognizing device.

    Hello,
    I'm trying to connect an Edirol FA-101 to my MacBook Pro. I'm running Snow Leopard 10.6.8. Other fireWire devices and drives work on the port, but the Edirol is not showing up in Audio MIDI setup or anywhere. I've tried both DC power and Bus power on the Edirol. Did the SMC reset, flashed the PRAM. Reset Permissions in safe mode. Still nothing. The lights on the device show that it is on and connected, but in system profiler I get "Warning: Unable to list firewire devices."
    Any ideas?
    Josh

    Hate to say it, but it sounds like the device has gone kaputt.

  • I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    Make sure you set the speakers as discoverable, which usually involves holding down a button for a few seconds. Go to System Preferences / Bluetooth and you should be able to add it.

  • I have a Mac OS X 10.6.7 and Firefox 4. Other browser are easily connecting to the net but Firefox. It keep trying to connect to my wireless network but not doing the job. Please give some advice..

    This happens when I first start the computer. Sometimes it connects to the wireless network, and during the day is fine.

    user8744713 wrote:
    I have downloaded Instant Client libraries (basic, SDK and SQL files, named instantclient-basic-10.2.0.4.0-macosx-x64.zip , instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip and instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip ) to Mac OS X 10.6.2 server and unzipped them as instructed in the manual here: http://download.oracle.com/docs/cd/B19306_01/install.102/e12121/inst_task.htm#BABJGGJH
    Manual then instructs to run runInstaller command. This command however is not being recognized by the system (' No such file or directory' error is thrown) which to my opinion means one of two things: either command is misspelled in the manual or the command file that runs it is missing. I tried it with or without a dot and slash and in small case letters, nothing works.
    When I installed similar libraries on Linux I had no problems but all was required there was to place libraries in the proper directory, no command was required.
    Maybe same can be done here as well but I am not sure where to place some of the files. I see .h files that should go to /usr/include but see no .so files that on Linux go to /usr/lib. There are some files with .dylib and other .*lib extensions but I'm not sure if they should be copied to /usr/lib or not. And then there are some other files I have no idea what to do with.
    Please help!!!No, you can't just drop a few files into a directory and have a working installation (well, I guess technically you could. But technically you could bail all the water out of Lake Superior with a teacup ...)
    Sounds like you've covered PATH and current directory issues. What about permissions? What OS account are you using for this installation? (you should have created an account called "oracle" and made it's primary group "dba"). Does that account have execute permissions?
    >
    Thanks in advance!
    Edited by: user8744713 on Mar 26, 2010 10:17 AM

  • Trying to connect second laptop wirelessly but can only use numbers in password field

    I've connected my Mac and another PC to my Valet Plus with no trouble.  The third PC, running Windows XP, can only be connected as a guest.  When trying to connect to this laptop to the home network, the password will only accept numbers.
    I've tried changing the PC's security settings, disabling the firewall, etc.  Has anyone experienced this problem? 

    What is the service pack on your computer?
    If it is windows XP service pack 1 then I think you will need to upgrade the OS to SP3. Because SP1 will not support WPA/WPA2 security mode.
    When you install the router using Cisco connect, the wireless security on the router will be WPA/WPA2.

  • HP Officejet Pro 8600 - Trying to connect to wrong wireless network.

    I have cable wireless and due to provider requirements I have had to disable my hub wireless and plus in another router to the hub to provide wireless. The hub has a network name and the router has the same name but shows a "2" after it.  When I try and connect my printer to this itonly picks up the Hub and says wireless is disabled which is correct.  How can I get it to recognise the router instead?
    I hope this makes sense

    Hi Pushoz,
    Please let me take a moment to say "Welcome Back" to the HP Forums.  I see that it has been awhile since your last visit.
     To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some issue with connecting your printer to your wireless network.
    Here is a document that will assist you with this issue and explain in detail how to connect over the wireless network.
    Please click on the following link's  for Installing the Printer Software on a Wireless or Wired (Ethernet) Network and for
    Connecting the Printer After Changing Your Wireless Network.
    Please write me back if you have any other questions.
    I hope you have a great day and if I don't hear back from you today, I hope you have an excellent weekend.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Error message "not connected via PPPoE" when trying to connect using airport wireless

    I cannot connect to my wireless internet connection using my ibook laptop. Using airport, I keep getting the message "host cannot find the PPPoE" or something like that. Any ideas how to fix this?

    Hi, Bob. Welcome to Apple Support Communities.
    Which exact iBook model is it? ("iBook" covers a lot of different Mac models, each with different capabilities.)
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    Which version of the operating system is it running now?
    What kind of optical drive does it have? (CD-ROM, CD-RW, DVD, Combo, or SuperDrive?)

Maybe you are looking for