Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
Thanks

The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

Similar Messages

I have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

i have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

Read the user guide:
http://support.apple.com/manuals/#airport

Hi I have an airport extreme base station And trying to dial on windows

Ok I have a airport extreme base station the one with dial-up modem and power over ethernet. Well i have people PC as my provider, and can dial the connection on my macbook by using internet connect. but on my hp i can not. I have tried to create a connection type on it and cant figure out how to have it connect like on internet connect. tho i can go the admin utility and click automatically connect and click OK and it dials the connection to disconnect i re click it and click OK and it disconnects but i do not like it that way. So what am i to do and is their a internet connect app for windows. I have also contacted apple and hp and that did not help. Feedback welcome and is needed.
Thanks to all that leave feedback

If you are using dial-up.
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility
http://www.java.com

HT4145 I have an Airport Extreme bas station now and I want to know if I can use an Airport Express to extend my network or do I have to use another Airport Extreme base.

I have an Airport Extreme Base Station now and I would like to know if I can use an Airport Express to extend my wifi network or do I have to use another Airport Extreme Base Station.

This AirPort Express:
http://www.apple.com/airportexpress/
It is the only Express with 2 Ethernet ports. All others are "old"
Apple does not specify a model number in their product information, but it is A1392 in the U.S. I do not know if Apple uses different model numbers in other countries.

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

I am trying to stop my Xbox from connecting to my Airport extreme base station and only connect to my airport express extender. Anyone have any ideas?

I have an aiport extreme base station in my living room and an airport express in my bedroom extending the network. For some reason my xbox along with some other devices always connects to the extreme base station in the living room which has a very low signal. Is there a way to setup a seperate network for my express extender so that I can connect only certain devices? HELP

You would probably want your Express to join the network if an extender isn't required. Reset to factory settings and join the network.
If you do want your Express as an extender run an Ethernet cable between the Express and the Verizon router and set the Express up to be in bridge mode, with the same WiFi network name and password as your Verizon router.

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

Connecting Airport Extreme Base Station and HiTron CGN3

A recent installation of Internet/CableTV services by Rogers.ca replaced my Airport Extreme Base Station WiFi network with one based on the Hitron CGN3 Cable Modem/Router. Many of the WiFi enabled evices in the home were switched to the new network without too much hassle. However, my multiple NEST CO/Fire alarms failed to connect and after some hunting I established that the CGN3, although apparently ipv6 'compatible' has this protocol not enabled. There is no input facility in the modem setup to activate the protocol. The importer of the device seems to have chosen to not respond to such tech issues.
It now comes down to either using the CGN3 as a Modem/WiFi server or extending the network to include the Airport Extreme on the CGN3 (don't know how to do that) or vice versa, extending the Airport network to include the CGN3 (don't know how either).
QUESTION:
Does anyone have any idea on how to make the Airport Extreme and HiTron Modem/Router function together since the Extreme has the ipv6 protocol enabled and NEST (and other 'Internet of Things') devices will reconnect, no problem.
More Info:
The only reason for the CGN3 to remain as a WiFi server is its range which seems to cover the required service area with a more powerful, stable signal than the Airport. That is somewhat important since TV services come over the Internet and mobile devices apps available from the Apple store can be used as very capable program guides/selectors and remotes for the HDPVR and secondary HD boxes that feed the TVs, eliminating a remotes collection and associated programming and infra-red transmission hassles. I believe the Cable boxes would accept getting the TV signals from the CGN3 and function commands from the Airport Extreme networks. That remains to be proven. Level 2 Technicians at Rogers and NEST Labs have looked at this and can't access the CGN3's ipv6 function to activate it. They don't know much about the Airport Express.
Second Thought:
On the other hand, a second apple Airport base station would extend the network range to rival the CGN3 and the WiFi function of the CGN3 could be turned off. I tried to connect the two routers by LAN cable but they don't seem to see each other and I don't know enough about network settings to get any further.

Whichever airport you use.. express or extreme doesn't matter much..
It should be setup in bridge mode. Plug an ethernet cable from LAN port on the CGN3 to WAN port on the Apple router.
Go into the airport utility and run through the setup. Don't be too worried if it chooses the wrong setup.. you can go back and edit it after the setup is complete.
You will want to open the Edit.
Then go to the various tabs to ensure it is setup the way you want..
On the Network tab.. bridge mode.
On the wireless tab, create a wireless network.
I recommend you use names that are short, no spaces and pure alphanumeric. eg AEwifi In my case with Time Capsule I use separate wireless names for the two bands. TC24ghz and TC5ghz but that is up to you.. it can make life easier.. then set channels can also make things easier.
Ensure your IPv6 is setup correctly.
The actual internet option will be dhcp.
You will have two wireless networks.. but both will use the CGN3 as router.. the airport if it worked in the past should work. Even if it is not the dhcp server. BUT let me add there is another way to fix this if this setup doesn't work.. please post back your result.. no luck then I will show you how to setup a static IP with the Apple router.

Does anyone know how to convert 3GPP videos to the iPhone 4S? I have favorite videos I would like to transfer to my new phone. Any help would be appreciated. Thank you.

Does anyone know how to convert 3GPP videos to the iPhone 4S? I can sync my photos from my computer but not my videos. Any help would be appreciated. Thank you.

Hello,
This link may be useful to you:
http://www.iorgsoft.com/iphone-4s/convert-3gp-to-iphone-4s-on-mac.html

Extending a wireless signal with an Airport Extreme Base Station, and an Airport Express as the "repeater".

I understand that I can extend Airport Extreme wirless "reach" with an Airport Express, but how? I've read through the posts and they say to "connect" the Airport Express. What does that mean, to an outlet, to an ethernet cable, what?

I understand that I can extend Airport Extreme wirless "reach" with an Airport Express, but how?
Enable the option on the AirPort Extreme to "Allow this network to be extended"
Then configure the AirPort Express to "Extend a wireless network"
If you do it this way, the AirPort Express connects to the AirPort Extreme using wireless only.
If you have the ability to run an Ethernet cable from the AirPort Extreme to the AirPort Express and leave it connected permanently, that will provide better performance than the "wireless only" type of connection.

Airport Extreme base station and Netgear DG834 router won't talk

Hi all,
I just bought a netgear DG834 adsl2+ modem router. However, I haven't managed to get my AEBS to talk to it (the LEDs on the right doesn't light up when trying).
Connecting to internet via an ethernet cable to the router works; connecting to the AEBS (with Airport Admin Utility for instance) works too. BUT, I cannot connect to the net wirelessly.
I suspect I should modify the router's firewall or something to that effect... but I'm no network expert. I have tried toggling the DHCP settings and IP distribution on and off, etc.
There is a slight possibility that the AEBS may be faulty, although the LEDs all light up even if once only.
Please, can anyone help me out?
Thanks in advance,
Simon
PowerBook G4, 1.25GHz Mac OS X (10.4.10)
PowerBook G4 Mac OS X (10.4.10)

The AEBS gets given an IP address (192.254.xxx.xxx), which I cannot use for reserving on the netgear router (illegal address, it tells me - it should be 192.168.0.3 or something shouldn't it?)
The 169.254.x.x address is typically seen if a DHCP (Dynamic Host Configuration Protocol) server is not found, a valid and unique address in the range of 169.254.0.0 to 169.254.254.255 inclusive and a subnet mask of 255.255.0.0 will be assigned.
I suggest that you perform a "hard reset" on the AEBS, and then, set it up as a bridge with the instructions I provided earlier.
Also, should I do anything about the RIP direction and/or version on the router? It's currently set to Direction: both, version: 1
Let me get a chance to download and read the User's Guide for your Netgear DG834. Which version do you have: v2 or v3, or newer? Since the AEBS will be in bridge mode, RIP, which allows a router to exchange routing info with other router, should not be important.

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

Have downloaded christmas screensaver but I don't know how to get it to work! Any help would be appreciated, I have an IMac desktop and not so computer smart Thanks

I have downloaded a Christmas screensaver and now cannot get it to the screensaver section. I have it on the downloads but now under preference the desktop will come up but not the screensaver says some kind of error , says it quit unexpectedly may be the flash player. I have IMAC desktop 10.5.8 OSX and not to computer smart. Can anyone help? Thank you so much

Hi Jerry, do you have a link to that one?
Can you paste the exact error in a reply?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

I want to install other add-ins, but when I click on the "accept and install button" on the web page, nothing happens. Any help would be appreciated.

Went to this page - end user license for TooManyTabs - Saves Your Memory 1.3.4. Clicked on accept and install button. Nothing happened. Went to several other pages and clicked on the same button and nothing happened.

Click the Firefox button, go to Options | Options | Advanced and in the General tab, remove the checkmark from "'''Warn me when websites try to redirect or reload the page'''".
You won't get that dropdown banner anymore afterwards.

Can't get PC laptop to connect to Airport Extreme base station. Help!

I've spent a lot of quality time on the phone with support staff at Apple, Earthlink, and Netgear. Now I turn to you fine folks.
I have an Airport Extreme base station. My G4 is connected to the base station via ethernet, and that works fine. My problem is with the wireless networking with our Dell laptop running Windows XP SP2. Wireless card is a Netgear WG511 with updated firmware. I've configured the network on the PC end using the Netgear Smart Wizard, rather than Windows (I don't know if that makes any difference).
Smart Wizard says the PC is connected to the network, and says that signal strength is excellent. However, there is no connection. I've tried pinging, but get no reply.
The status bar in the Smart Wizard window switches every 2 seconds from "Connected" with excellent signal to "Searching" with virtually no signal. The log shows that it's constantly connecting to and disconnecting from the network.
I've gone over IP and MAC addresses and whatever other settings I could check with all of the respective phone support people. I'm using WPA/WPA2 Personal security, and have double-checked the 13-digit password on both ends. I'm connecting using PPPoE, per Earthlink's settings.
This is maddening! Any suggestions? I'd really appreciate it.
G4 Mac OS X (10.4.10)

See if iFelix's suggestions work for you.
http://www.ifelix.co.uk/tech/1000.html
Remember all the smart wizard stuff is strickley for PC Hadrware and Software and does you no good at all with a Mac.
Don

Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

Similar Messages

Maybe you are looking for