Trying to connect another laptop wireless,have ???

I get so far,and when it wants a security key,or passphrase, I don't know what I need to put in? Am I making sense it's the last thingI do before I connect to the internet. Hope you can understand me. LOL... TY
TIA...
Oh, What is a ISP?, I have tryed every number I can find, nothing works,says it's wrong.
Message Edited by CountryGirl2 on 07-15-2007 03:13 PM

Hey there CountryGirl2!
Let me start asking you for a few things first and probably we could make a solution out of your problem:
1. What's the model# of your router? Try to look underneath it and you'd see it below the Linksys label. ex. WRT54G v6.
2. Do you have any computer which is physically connected to the router and is able to get online?

Similar Messages

Trying to connect second laptop wirelessly but can only use numbers in password field

I've connected my Mac and another PC to my Valet Plus with no trouble. The third PC, running Windows XP, can only be connected as a guest. When trying to connect to this laptop to the home network, the password will only accept numbers.
I've tried changing the PC's security settings, disabling the firewall, etc. Has anyone experienced this problem?

What is the service pack on your computer?
If it is windows XP service pack 1 then I think you will need to upgrade the OS to SP3. Because SP1 will not support WPA/WPA2 security mode.
When you install the router using Cisco connect, the wireless security on the router will be WPA/WPA2.

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

My laptop continually tries to connect to HP3050 wireless even if I am not near the printer.

HP3050 wireless printer Samsung Laptop with Win 7 SP1
My laptop every minute or two runs a program in the background. I see an egg next to the mouse pointer. I used Process Explorer to establish that it is trying to connect to HP3050 wirelessly. This happens even if I am nowhere near the printer. It is very annoying and uses up computer resources. I have removed the printer for now and the problem is cured. How can I fix this and use the printer again?
[email protected]

Topgunb,
Try re-installing the latest version of the full feature software located here:
http://goo.gl/PTwdX
Let me know if the issue persists. Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have tried to connect my c310 wireless although i have connected with usb. help!

i have tried to connect my c310 wireless although i have connected with usb. help!
Printer does not recognize the network name. I have run the setup many times with no success.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal. I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model)

Hello,
I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?

Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2)

I have a macbook 15 inch and philips LCD which I'm trying to connect my laptop to. I currently have a HDMI plugged in, but am getting an error message "no video input" on the LCD tv. Please help!

I have a macbook 15 inch (retina display) and philips LCD which I'm trying to connect my laptop to.
I currently have a HDMI cable plugged in, but am constantly getting an error message "no video input" on the LCD tv.
I have checked the philips LCD to be in the HDMI mode and googled many threads but have
not found a solution to solve my problem. Would appreciate any help given!

Hello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H.

I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

Trying to connect IPAD to wireless router

Help & advise needed. I have been trying to connect to my wireless router. I can see my network in the IPAD and when I try to join and enter my password it give me a message " incorrect password". I have reset my router 2x now and created new user & password ID.

I am having the same problem. It is very frustrating. My lap top connects to my router just fine and my iPad can connect to other routers with no problem. PLEASE help us!

Printer not present when trying to connect even though drivers have been installed

printer not present when trying to connect even though drivers have been installed

Hi Marc,
If you are having issues with printing from your iMac I would suggest that you troubleshoot using the steps in this article -
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
Specifically -
Troubleshooting steps you can use if there is an issue
Ensure the printer is connected, has power, has ink / toner, paper, and no alerts on its built-in display.
Network based printers should be on the same subnet; you shouldn't have to worry about this if your printer is on your home network.
Use Software Update for the latest available updates.
Delete the affected printer from Printer & Fax System Preferences, then re-add the printer.
If the issue persists, try these additional steps:
Reset the printing system (see below). Then, add the printer again.
If the issue persists, reset the printing system again. Download and install your printer's drivers from here. Then, add the printer again.
If the issue still persists, contact the printer vendor or visit their website for further assistance.
Thanks for using Apple Support Communities.
Best,
Brett L

Two years trying to get Toshiba Laptop Wireless Connection to work

I've been trying for the last two years to try and get the wireless connection on my Toshiba Laptop to work without much sucess. I did for a short time manage to establish an ad-hoc wireless connection from the Laptop to a Desktop and share the internet connection that way but then that stopped working.
I have a Toshiba Satellite Pro U400-15L model no PSU45E-00J005EN. It's the one with the 12.1" screen and running Windows XP Pro sp3.
My Wireless switch on the front of the laptop is turned on. It is also enabled in the software FN F5 Wireless enabled, bluetooth disabled. I don't have Intel ProSet.
Previously when I managed to establish an ad-hoc connection that was using microsofts software. I had to manually enable the Wireless Zero Configuation (WZC) each time though as it always started disabled or stopped even if I set it to start automatically. It was a monumental PITA.
When I try and connect to the home ADSL Wireless Router (Belkin N150) using the Toshiba software I get the error message "another vendor's application is controlling the wireless adaptor".
I get this all the time even if I have disabled Microsofts Wireless Zero Configuration (WZC).
I was thinking Windows was still somehow controlling this even though I have disabled WZC so having read solutions in other posts I have tried going to...
contol panel -> network connections -> wireless connection -> properties -> wireless networks tab -> uncheck "Use Windows to configure...".
But unfortunately there is no "wireless networks tab" in there, all I have is the other two tabs. And since trying to use Toshibas software to establish the wireless connection using their Radar thing, now when I click into the wireless network connection it has the message "Windows cannot configure this wireless connection. If you have enabled another program to configure this wireless connection, use that software."
Can anyone on the forum or at Toshiba help please?
Thanks,
John

Two years? Sorry but I cannot believe it.
If everything is Ok and I mean if there is no hardware problem you dont need longer than two minutes for WLAN configuration.
At first you must be sure the WLAN card is installed properly (device manager).
WLAN card must also be enabled properly (switch > check FN+F8 > check ConfigFree tool).
When he WLAN card is enabled properly (check status in ConfigFree) scan the area using option RADAR in ConfigFree.
Can you find this option?
Can you scan the area?
Is some WLAN visible for your notebook?

I have a Mac OS X 10.6.7 and Firefox 4. Other browser are easily connecting to the net but Firefox. It keep trying to connect to my wireless network but not doing the job. Please give some advice..

This happens when I first start the computer. Sometimes it connects to the wireless network, and during the day is fine.

user8744713 wrote:
I have downloaded Instant Client libraries (basic, SDK and SQL files, named instantclient-basic-10.2.0.4.0-macosx-x64.zip , instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip and instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip ) to Mac OS X 10.6.2 server and unzipped them as instructed in the manual here: http://download.oracle.com/docs/cd/B19306_01/install.102/e12121/inst_task.htm#BABJGGJH
Manual then instructs to run runInstaller command. This command however is not being recognized by the system (' No such file or directory' error is thrown) which to my opinion means one of two things: either command is misspelled in the manual or the command file that runs it is missing. I tried it with or without a dot and slash and in small case letters, nothing works.
When I installed similar libraries on Linux I had no problems but all was required there was to place libraries in the proper directory, no command was required.
Maybe same can be done here as well but I am not sure where to place some of the files. I see .h files that should go to /usr/include but see no .so files that on Linux go to /usr/lib. There are some files with .dylib and other .*lib extensions but I'm not sure if they should be copied to /usr/lib or not. And then there are some other files I have no idea what to do with.
Please help!!!No, you can't just drop a few files into a directory and have a working installation (well, I guess technically you could. But technically you could bail all the water out of Lake Superior with a teacup ...)
Sounds like you've covered PATH and current directory issues. What about permissions? What OS account are you using for this installation? (you should have created an account called "oracle" and made it's primary group "dba"). Does that account have execute permissions?
>
Thanks in advance!
Edited by: user8744713 on Mar 26, 2010 10:17 AM

Trying to connect to apple wireless with my pc laptop

I am connecting to a apple network(wireless) but can not gain access to internet. I have no problem with hotel wireless networks or my one at home so I know my card is working. cannot figure out why I connect to my friends apple network but when I try email or to gain access to any web site I get:page not found or url not found. any help?
thanks!

I went and tried again this weekend to log on going
thru my friends apple extreme network. still no go.
tried some new ideas but still have not got on to
the net. I asked him about wep and wpa. he says it
is a wep password but is tied into wpa network.
If he is using WPA, does your wireless adapter support WPA?
After
reading the many replys to my posts I went to a
sight that talks about AirPort Admin Utility for
Windows. Do I have to have this firmware or is this
for the administrer? he does not want me fooling
with his network he polietly told me. Do I need
this AirPort Admin Utility for Windows?
The Airport Admin Utility is only used to administer an airport base station, you do not use it for connecting to an Airport network.
iFelix

Officejet J6450 will NOT connect to laptop wirelessly - PLEASE HELP...

Good afternoon,
I just spent almost two hours on the phone with a woman from the HP Tech Support team that I could barely understand (not exaggerating - would be wonderful to bring back customer service to the US - god knows we need some more jobs here!!). She had me do a number of things, none of which solved my problem - needless to say, it was a very frustrating two hours and now I am very frustrated!
My issue is that my laptop will not recognize the wireless Officejet J6450. I have Comcast broadband cable internet, a Linksys wireless router, an HP desktop, and a Dell laptop (laptop is from employer - I work from home). I loaded all of the software on my desktop first (connected via USB) and everything worked perfectly. I used the Network Setup Wizard on the printer and connected to my Linksys wireless router with no issue whatsoever (full signal strength). I printed a wireless netwok report - no problems were found - all diagnostic tests were a success. The ethernet adapter wireless network connection IP address on my laptop is 192.168.1.102 and the IP address of the printer is 192.168.1.103. So then I proceeded to load the software to my laptop for wireless connection - thinking all along how easy getting everything set up has been. I then loaded the software to the laptop and I got to the part where it asks what type of connection I want to set up. I chose wireless and it asked me to temporarily plug the laptop to the printer via USB cable. I did so and it began searching for my wireless network. I selected my wireless network and it began searching for my printer. This is were I hit the brick wall - it could not find my printer. I tried again - chose my network, tried to find the printer - no such luck.
I then did a Google search and checked these boards regarding alternative solutions. I tried installing through Windows printers (BTW - laptop is running XP SP2). Selected Local Printer, unchecked the automatically select box, chose standard TCP/IP, etc. - that didn't work either.
I consider myself fairly PC savvy and I am perplexed by this - just doesn't make any sense why the laptop won't detect the wireless printer.
I would greatly appreciate any guidance regarding my connectivity issue as I do NOT want to call HP Tech Support back.
One other thing, the Tech Support lady told me to reset the printer by turning it off and then having me press the pound button and the number 6 before turning it back on. Not sure why she had me do this, but it reset the ink cartridges and alignment and now the printer no longer reports how much ink is left. Any way to fix that?
Lastly, out of curiosity, why does HP recommend not leaving the wireless enabled on the printer when not using it? Doesn't make any sense to have to turn off wireless everytime after printing and then turn it back on when needing to print again.
Sorry for this long post - hopefully this is enough information for you to help me out.
Thanks in advance!
Jeremy

Hi Jeremy,
First, I have no idea why we are recommending turning off the printer's radio when you are not using it. The only thing I can image is that if you leave the radio on and in its default configuration (SSID = hpsetup, no security, Ad-Hoc), then you are susceptible to neighbors or war-drivers using your printer.
Next, you have an interesting problem. You've done everything I would have tried (check connectivity by browsing the printer's internal web page, turn off the firewall, try to manually add the printer).
I know you've disabled the firewall. I might recommend uninstalling the firewall temporarily, then installing the SW again to see if that works. Also, you might check to see that you don't have another firewall accidentally enabled (maybe the Windows firewall?).
Finally -- is there anything unusual about your wireless-router configuration? Have you set any port-forwarding or other advanced settings? BTW -- what model wireless-router are you running?
And of course there's a rather painful step to try that usually works: reinstall the OS on your laptop and then install the printer SW (I'm somewhat embarrassed to suggest this but it does seem to work).
Message Edited by Wi-Fi-Guy on 02-20-2009 09:12 PM
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Unable to connect on laptop wirelessly

I can't connect to the internet on my laptop but I'm able to when I don't turn on any wireless security. When I set as WPA/WPA2 security then I can't connect to my network on my laptop wirelessly. I'm using a WRT160n v3 linksys router.
Message Edited by klyy on 01-02-2010 04:01 PM

If you are using Win XP, you will need SP3 to run WPA2 ( = WPA with AES). Vista already runs WPA2.
Next, in the router, give your network a new unique SSID. Do not use "linksys". Do not use your old SSID. If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Next, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Delete any network with your old SSID. Also delete any network that you do not recognize, or that you no longer use. Then enter your new network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. Your computer should connect automatically to your router (it can take up to 2 minutes). If you still have trouble, temporarily turn off your computer software firewall and try again to connect.
If the above does not fix your problem, download and install the latest driver for your computer's wireless adapter.
Some users have reported improved wireless performance by switching to WPA encryption.
Note:
For WEP, enter WEP "key 1" (found in the router) into your computer, not the WEP password or passphrase.
For WPA or WPA2, enter the key (sometimes called password or passphrase) into your computer.

Trying to connect another laptop wireless,have ???

Similar Messages

Maybe you are looking for