Trying to connect canon MG 3522 wireless printer with no success

i am  trying to connect my new canon MG 3522 wireless with no success, via wi-fi. can u help me please?

Hi us-1flbug,
You can try installing the drivers for the printer from the Canon USA website to ensure that the latest versions are installed. When installing the drivers, please ensure that any antivirus for firewall software that is on your computer is temporarily disabled, as these programs can sometimes block the printer from being detected on the network.  Once the printer is detected successfully, the protection software can be re-enabled. 
Please click here to go to the Drivers and Software page for the PIXMA MG3522. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file has been downloaded, please double-click on it and follow the prompts to install the drivers on your computer.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • I have been trying to get a advent w10 wireless printer to print from the iPad ,have tried various apps with no success,

    I Am trying to connect a advent w10 wireless printer to work with the iPad ,tried various apps with no luck,,

    You can check for problems with preferences and try to rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences

  • I have an airport extreme.  i am trying to connect a laptop with windows 7 to a wireless printer, with no luck.  any ideas?

    I have an airport extreme.  i am trying to connect a laptop with windows 7 to a wireless printer, with no luck.  any ideas?

    The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
    Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
    Read up the issue.
    http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
    Cisco vpn client..
    https://supportforums.cisco.com/thread/239113
    I did not search much.. just grabbed the first article I could find that explains the issue.
    The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
    It is also a security risk using split tunnelling so often it will not be allowed.
    Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

  • I need to connect my Chromebook to my Canon PIXMA MG3520 wireless printer

    I'm having problems connecting my Chromebook to my Canon PIXMA MG3520 wireless printer. Because of the Chrome OS, it will not connect like Windows or Mac. I need help before retire, please.

    Hello Bama-85,
    You are correct, printers do not install the same way on Chrome OS. I looked on the Google Cloud Print site and your Canon printer is indeed supported. Follow this link to setup your cloud ready printer.
    I haven't setup a Canon printer via Google Cloud Print, but I assume it's as easy as setting up HP's printers on the print service. 
    Miles
    HP Employee

  • Canon Pixma MG6120 Wireless printer - can't get to work with AirportExtreme

    Canon Pixma MG6120 Wireless printer - can't install mg6100swin104ejs.exe 64 bit wirelss driver on Windows 7 64bit when printer is registered to 10.0.1.X Airport Extreme. Even if I enable Advanced Port Mapping, Printer Sharing the Canon software doesn't recognize the printer if it is registered wirelessly to the Airport Extreme. Canon senior tech support and Apple senior tech support don't know how to help. Any advice for someone who was able to get a Canon Pixma Printer to work with their Airport Extreme from a Windows 7 64bit PC also connected to 10.0.1.X subnet? Your advice is greatly appreciated. The printer once online is pingable at 10.0.1.9 and I can see SD cards and browse photo's just can't get the Canon software to wirelessly activate/install.

    To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
    Hope this helps.

  • Hi. i am trying to connect a panasonic kx-mb2061 printer/fax via usb cable to my imac. i got as far as the printer browser but can not find panasonic. where is it?

    Hi. i am trying to connect a panasonic kx-mb2061 printer via a usb cable to my imac. I got as far as printer browser, but can not find panasonic. where is it?

    Mac UFR II Printmonitor
    UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
    MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
    Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
    Other Printers:
    Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

  • How can I print from my ipad2 via my Canon Pixmar MP620 wireless printer? I get a message stating "no airprinter found".

    How can I print from my ipad2 via my Canon Pixmar MP620 wireless printer? I get a message stating "no airprinter found".

    Welcome to Apple Support Communities.
    If you have a Mac running OS X, try AirPrint Activator.
    http://netputing.com/airprintactivator/airprint-activator-v2-0/
    It's "donation-ware."
    Free to download and try. If it works and you like it, the developers do appreciate a donation, but the app continues to function, even without a donation.

  • Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

    Hi,
    I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
    Your help is really appreciated"

    Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
    Thanks really appreciating your help

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • I'm trying to connect to the internet wirelessly and unable to do so, can anyone help?

    I
    I'm trying to connect to the internet wirelessly and unable to do so, can anyone help?

    With the lack of information you provide how can anyone help? How connected? What kind of service? Router? Make? Model? What model MBP? What happens when you try to connect?
    This will help.
    In the body of the post, provide a description of the problem, the environment, actions you have taken etc so that people who have expertise can have a chance of providing an answer without having to ask more questions. Please help us to help you.

  • New Galaxy 5s.  Trying to connect to a guest wireless that routes browser to a login screen.  The wireless will not connect (gives authentication error), so will not pull up browser window.  My previous Android did not have this problem (it would connect

    New Galaxy 5s.  Trying to connect to a guest wireless that routes browser to a login screen.  The wireless will not connect (gives authentication error), so will not pull up browser window.  My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).

    Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

  • I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

    I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

    never assume or assume their advice works out of the box
    install the drivers that they sate is the latests on their site!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=dk &prodNameId=21861&prodTypeId=18972&prodSeriesId=27901&swLang=8&taskId=135&swEnvO ID=4082

  • I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

    I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

    I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS.  If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.

  • I don't know what I am doing... just trying to connect WRT54G ver 6 wireless router...

    I got  a new laptop and connect to comcast just fine.  Now I am trying to connect to linksys wrt54g wireless router.  I know I SHOULD KNOW this.... but originally connected thru Motorola SB5120 modem thru ethernet cable.  What do I do next?  Would appreciate any help to assist... many thanks.
    Solved!
    Go to Solution.

    If your Internet Service Provider is Cable follow this link to configure the router.
    If your Internet Service Provider is DSL follow this link to configure the router.

  • I have an ipad 2, verizon jet Pak router, canon pixma mg3220 wireless printer. All were working until yesterday. Now I get  no air printer found message. Have shut down everything and restarted. No change

    I have an ipad 2, verizon jet Pak router ang canon pixma mg3220 wireless printer. All were working until yesterday. Now, I am getting no air printer message. Have shut everything down and restarted. It did not work.

    See requirements for AirPrint (http://support.apple.com/kb/ht4356):
    If your printer supports AirPrint but does not work then:
    Your printer might need a firmware update
    Your printer must be on the same WiFi network
    Your router must support Bonjour (Zero-configuration networking).
    For troubleshooting:
    Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
    Turn on WiFi router
    Wait 30 seconds
    Turn on printer
    Wait 30 seconds
    Turn on iPad
    Try to print.

Maybe you are looking for