Trying to connect IMac to Lion server (network account)
Hello,
I have been trying to get this to work for a few weeks now. I have 2 Imacs and a Macbook, i am trying to login to a network account. I did the step by step to set up my server. I can screen share and see all the shared folders. I have a network user in the work group, and when i go to users on my macbook, and say join the server, i get host not found, but the server is active.
My network is a DSL modem ( in bridge mode), then to a time capsule, that is hard wired to my server and one Imac, everthing else is wireless. My time capsule hands out the Ip's, and a DNS server is running on my lion server.
Am I having a DNS problem, I am not sure what DNS has to go where starting with the time capsule. Should i have my time capsule just server one IP to my lion server and have the server hand out the other IP's over DHCP?
My goal is to have network user account on my server, and no matter what computer you use, you can get the same information. Then set up mobile account for when my macbook is not on the network.
I setup profile manager, and tried to push my settings to my account, but it also fails every time.
I tried to follow apple's doc's on this but I have luck with some things, and now with others.
I am running lion server on a mac mini server.
Thank you,
Justin
HI,
my experience is as follows:
1. You have to setup a home folder for network/mobile users with Server.app
2. Create a group for network users with the workgroupmanagement.app from serveradmin tools
3. Create users with correct settings under "preferences" in workgroupmanagement.app, especially "rules"
4. Put the users in the group
4. Set the appropriate permissions to the home folder and share it over the network with server.app
After playing around I could login from a MacBook Pro and synchronize the users library and complete home folder. After testing and restarting the machines (Lion Server is on a Mac Mini) I could relogin with the network/mobile user.
My problem actually is, that I could not login from any other Mac. Everytime the system told me, that there is a fault with login.
Before I want to login with the network/moblle user on another MacBook i logout the user form the MacBook Pro.
No luck :-(
I test it with other users with same settings.
No luck :-(
I integrate the MacBooks in the Computer settings in the workgroupmanagement.app.
No luck :-(
I hope this thread give answers the next days, because I need a working synchronize and account management solution for different users and machines :-)
Cheers
Ishan
Similar Messages
-
SL bound clients can't logon Lion Server network accounts
Sorry if this has been covered or resolved elsewhere elsewhere, if so please point me in the right direction!
I posted this in a different thread and it was suggested this one would be more helpful.
I've spent all day with a new mac pro with Lion Server installed trying to set up a small network. Created an OD Master (from the Server App) then used WGM to make accounts. From the Server app I'd created sharepoints (where has File Sharing gone in Server Admin?) one of which was enabled to be used as home directories for which I configured back in WGM. I then bound SL clients computers to OD making sure there were no hypens in the computer names and allowed all network users to logon onto the machine as well as adding the Lion servers IP address as a DNS record.
The problem is, I go to logon with the network account and it starts to logon, i.e the icon expands rather than shakes then stops with the not very informative error "Cannot log you on because an error occurred".
The bound clients appear in WGM. The user accounts look ok. I've not enabled SSL on anything. This is really frustrating.
Any help much appreciated.
Regards,
EvanSorry if this has been covered or resolved elsewhere elsewhere, if so please point me in the right direction!
I posted this in a different thread and it was suggested this one would be more helpful.
I've spent all day with a new mac pro with Lion Server installed trying to set up a small network. Created an OD Master (from the Server App) then used WGM to make accounts. From the Server app I'd created sharepoints (where has File Sharing gone in Server Admin?) one of which was enabled to be used as home directories for which I configured back in WGM. I then bound SL clients computers to OD making sure there were no hypens in the computer names and allowed all network users to logon onto the machine as well as adding the Lion servers IP address as a DNS record.
The problem is, I go to logon with the network account and it starts to logon, i.e the icon expands rather than shakes then stops with the not very informative error "Cannot log you on because an error occurred".
The bound clients appear in WGM. The user accounts look ok. I've not enabled SSL on anything. This is really frustrating.
Any help much appreciated.
Regards,
Evan -
Lion Server network accounts not available after 10.7.4 update
I installed the incremental update for Server 10.7.3 to 10.7.4, and now my network accounts can't log in. That would be all users of the machine then. How can I fix this?
Unimpressed!Exact same thing happened to me on my 2010 MacBook Pro, running Lion as well. Updated to 10.7.4 and whammo, no more DVD drive. Tried numerous discs and the computer just mulled over whether it was going to play the discs for a few attempts then spat them out. All the discs I tried were in perfectly good working order.
Just saw this thread, but created one of my own before (https://discussions.apple.com/thread/4026857). Still waiting for some help.... -
Lion Server network accounts not working on some computers.
Hello all -
I'm currently having an issue with network accounts working on some Macs but not others. I have a Mac Mini and a MacBook Pro. The Mac Mini works fine and I can login and sync my network account with the server just fine. However, I cannot connect to it from my MBP.
When I try and connect I get an error that says "You are unable to log in to the user account "xxxx" at this time. Logging in to the account failed because an error occurred."
If I login through console (by typing in ">console" in the username field) I get an error that says the user does not have a home directory...
I have searched numourous other forums but I have not found a solution that seems to solve this problem. I have unbound and re-bound my client to the open directory and I have restarted file sharing. Neither has solved the problem. I have a feeling the issue originates somewhere on the MBP since I can log in to the Mac Mini without any problems.
Anymore suggestions?Thanks for your suggestion, SolidWood. Unfortunately it didn't help.
After a 90 minute phone call with AppleCare, this issue has finally been resolved. Here is what the solution was. Turns out it was pretty simple but it took a while to find it.
First we created a test user and left the home folder set to Local Only in the Server App. I was successfully able to login with the test user on both clients but since there were no mobility preferences set, it was pretty basic.
Then, we removed the Users sharepoint from file sharing, turned off file sharing to disconnect any users, and restarted the server. Then we created a new folder on the Server HD with a random name. We chose Darron. We created a new sharepoint in file sharing (with it still turned off), and shared the new folder called Darron. Double click on the sharepoint and scroll to the bottom and check the box that says "Make available for home directories over AFP". Then we restarted file sharing.
Then we opened Workgroup Manager, clicked on the problem user in the left sidebar, clicked on the Home option at the top, and there were three things listed:
(None)
afp://servername.com/Users
afp://servername.com/Darron
Then we removed the Darron sharepoint from file sharing, and found that it was still listed as a home directory under the problem user.
This was the root of the problem. The system didn't know which path to use as the home directory.
Sooooo...
In the server app, we opened the Directory Utility (Tools in the menubar, Directory Utility). Clicked on Directory Editor. Authenticate to the directory using the diradmin login. Changed view settings to match this below:
In the left column, there were two paths listed for home mounts. We deleted both of them, saved changes, and closed directory editor.
Then, we restarted workgroup manager and both paths had been deleted from the users home listings. This was begining to solve the problem.
In the Server App, we recreated the users sharepoint, made it available for home directories, and restarted file sharing and workgroup manager. Now only one path is listed for the home folder for all the users.
This solved my problem of not being able to login on the MBP. The system synced the home folder and all was well. On the Mac Mini, I had to delete the problem account, un-bind from the network server, re-bind, and recreate the account. Now both clients are sycning perfectly and all is well.
Thank God I bought AppleCare! Thanks to everyone else for their help and suggestions.
As a recap, the problem of not being able to login to the MacBook Pro was caused by having multiple paths to the multiple home folders. These rogue paths were added somewhere in the troubleshooting process to try and recreate the home directories before I called AppleCare. To solve this, we had to remove the directory listings from accounts using Directory Editor, remove and recreate the users sharepoint in file sharing. The syncing problem on the Mac Mini was also created when multiple paths were introduced. The system didn't know which files to use.
Taylor -
Lion Server Network Account loses all created files after logout
Hi,
I am new to Server, I got Lion Server working on a Mac Mini and everything was alright until I added users from existing client machines. I created new Users on the Server App with the same name and passwords as on the existing client machines, logged in as root on the Server and copied the client user home folder contents from an external HD into the User home directory on the Server. After that I ran Batchmod on all the User folders on the server and everything seemed to be working alright, now the only problem is, if you create a file or folder on the desktop it is not there anymore the next time I log back in. The accounts are setup as Network Accounts, and they are available from any computer in the office, they just don't save any settings that have been changed or any files and folders.
I have found the "Convert a local Home into a Network Home" post to late, http://www.afp548.com/article.php?story=20050331212133607&query=migrate%2B
does this sound like a permissions issue, and if so, can I still repair it or is it better to start fresh?
Thank youI think your problem has a rather simple solution, since all files in a directory aren't modified unless you tell the OS or a program you've installed to.
To keep the external hard drive mounted even when nobody is logged into your server, enter the following into terminal:
sudo defaults write /Library/Preferences/SystemConfiguration/autodiskmount \
AutomountDisksWithoutUserLogin -bool YES
I think your server is looking for the external Hard Drive, but can' tfind it and thus defaults back to the internal HD. -
I have set up a scratch mountain lion server with open directory. copied over old user account directories and added my users that match the directory ids. Currently if a networked user logs into a networked computer, instead of mounting the network home directory, its creating a local home directory. suggestions?
thanks,
DaveAdditional info: it appears that certificates are not working either: setting up ical: "the certificate for this server was signed by an unknown certifying authority."...
-
I am trying to connect IMAC OSx 10.9.4 to Suddenlink thru ethernet connection in New Bern NC. No luck. Any hints?
If you bring up Safari browser, and go to www.google.com, does it give you an error?
It is possible that you are not getting DNS. From the OSX terminal can you run the following two commands
1. dig www.google.com
2. ifconfig en0
3. ifconfig en1
4. ping -c 3 www.google.com
1. Example output...
; <<>> DiG 9.8.3-P1 <<>> www.google.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44161
;; flags: qr rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;www.google.com. IN A
;; ANSWER SECTION:
www.google.com. 92 IN A 173.194.121.18
www.google.com. 92 IN A 173.194.121.20
www.google.com. 92 IN A 173.194.121.16
www.google.com. 92 IN A 173.194.121.17
www.google.com. 92 IN A 173.194.121.19
;; Query time: 43 msec
;; SERVER: 192.168.1.1#53(192.168.1.1)
;; WHEN: Sat Sep 6 17:19:56 2014
;; MSG SIZE rcvd: 112
Example output for commands 2 and 3
ifconfig en0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether b8:e8:56:35:bf:e2
inet6 fe80::bae8:56ff:fe35:bfe2%en0 prefixlen 64 scopeid 0x4
inet 192.168.1.9 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=1<PERFORMNUD>
media: autoselect
status: active
ifconfig en1
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:00:79:ee:b0
media: autoselect <full-duplex>
status: inactive
Example output of 4.
ping -c 3 www.google.com
PING www.google.com (173.194.121.18): 56 data bytes
64 bytes from 173.194.121.18: icmp_seq=0 ttl=250 time=9.049 ms
64 bytes from 173.194.121.18: icmp_seq=1 ttl=250 time=10.568 ms
64 bytes from 173.194.121.18: icmp_seq=2 ttl=250 time=9.393 ms
--- www.google.com ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 9.049/9.670/10.568/0.650 ms -
Trying to connect to Master XML server
Hello everyone....
I have a single NW 6.5 SP7 Zen 7 Inventory server and I am getting this
error and some odd things happening when I try to look at the status of the
workstation scans. First of all, I am wondering if these problems are
relate.
Either way, I need to get this "Trying to connect to Master XML server..."
error fixed. Someone suggested in an earlier post that a complete uninstall
and reinstall may be the way to go. They talked about online documents that
gave detail instructions on that but I never found anything like that.
So, I'm kind of stuck. Can anyone help me out there....?
Thanks.
Delon E. Weuve
Senior Network Engineer
Office of Auditor of State
State of Iowa
USADelon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help -
Macbook pro keeps trying to connect to an old server
I have a macbook pro, just updated to OSX mavericks, when I turn the machine on, it will keep trying to connect to an old server that no longer exists (a windows pc I had at home I called "estudio"); how can I fix this? where is that the OS keeps the list of servers that the machine has been connected to? I already went through the option of "deleting all the list of recent servers" on the Connecting to a Server window.
Thanks for any help
SandraCheck in:
System Preferences > Accounts > Your_username > Login Items -
Why do I get the message "cannot get mail" when trying to connect to ms exchange server?
Hard to say. Has it ever worked? Maybe your account has mobile e-mail disabled. Maybe ActiveSync isn't set up properly on the server. maybe the correct ports are not open on the corporate firewall.
You will have to talk to your IT department. -
ZfD 701 Trying to connect to Master XML Server
After loading the Inventory service, everything seems to be normal,but
then it tells
....connection refused
Trying to connect to Master XML Server...
I did not find much in the Knowledge base.
Does this mean, the Inventory service is looking for a inventory proxy?
If so, wow can I tell Zfd to stop looking for the proxy?
JrgenJrgen Blessing,
> Trying to connect to Master XML Server...
It sounds as if the webservice is not loading correctly.
http://www.novell.com/support/search...200%2031966570
http://www.novell.com/support/search...200%2031966570
http://www.novell.com/support/search...200%2031966570
Jared Jennings - Data Technique, Inc.
Novell Support Forums Sysop
My Blog and Wiki with Tips, Tricks, and Tutorials
http://jaredjennings.org -
Can a Snow Leopard client connect to a Lion Server?
I have an XSAN setup with two Mac Mini servers.
I have a few Xserve lying around and I want to make use of them.
One Duo Core which is not working at the moment. I think I can install Lion on that one? Right?
Then I have two G5 - none intel, which I'm thinking I'll reinstall Snow Leopard on and use them as clients.
Can they connect to a Lion Server? I have a few XSAN licenses left which I think I need for OS's older than Lion?
I short, can a Snow Leopard client connect to a Lion Server?One Duo Core which is not working at the moment. I think I can install Lion on that one? Right?
You can't install Lion on a Core Duo-based system It requries Core2 Duo as a baseline. The Core Duo is a 32-bit chip whereas the Core2 Duo is 64-bit.
Then I have two G5 - none intel, which I'm thinking I'll reinstall Snow Leopard on and use them as clients.
Nope, again. Snow Leopard requires an Intel-based system. The highest you can go with the PowerPC machines is Leopard (10.5.x)
Can they connect to a Lion Server? I have a few XSAN licenses left which I think I need for OS's older than Lion?
This may be irrelevant given the above, but define 'connect' please. There are a myriad of ways of 'connecting' a client to a server. In many cases they don't have to be the same OS, platform, processor or anything else (how many web servers do you think are running Mac OS X to match your client? -
Anytime I open Firefox I get the following message: It is strongly recommended that you apply this update as soon as possible. When I try to do it, it is showing that it is trying to connect to the update server but nothing is happening
If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup -
Trying to connect to maser xml server.....
running netware 6.5 sp5, zfd 6.5. Getting:
>Trying to connect to Master XML Server...
on the ZENworks Inventory Server screen on the server.
Questions include:
*What's a "Master XML Server"
*How do you make the message go away
If you want to refer me to TID 10099856. I did read that, and it sounds
like the most likely solution. However, I'm unsure where to find a new
ZWS.PROPERTIES or ZFS-STARTUP.XML file. Further, I can edit these files
and they do not appear to be corrupt.
Thanks for your assistance,
PaulPaul,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Maybe you are looking for
-
IPhone 4 Won't Turn on =[ broken sleep button too
Hey guys! well heres my question/problem. Yesterday I noticed my battery was running low and it gave me the 20% battery warning but i wasnt around a charger so i just put it back into my pocket. after a few minutes i noticed that my phone wouldnt tur
-
How to export a table with half a million rows?
I need to export a table that has 535,000 rows. I tried to export to Excel and it exported only 65,535 rows. I tried to export to a text file and it said it was using the clipboard (?) and 65,000 rows was the maximum. Surely there has to be a way to
-
Photoshop Cs6 Help glitch.
Okay was just adding a layer effect and out of nowwhere it says "Photoshop online help could not be displayed because you are not connected to the internet". So I went to connect and hoped the pop up would go away but it is still there. Need help ASA
-
Just bought a new iMac and installed my back-up. However, I keep getting prompted to "Provide a serial number" when I try to run any CC program. I'm a fully paid up ACC subscriber and have logged in and checked all my details. My account is given as
-
How can you complete a form?
I converted a PDF document to Word Document. Our vendor sent a request form for Information needed from our company. I could not complete the form to submit the information. I will have to print the form and fill out by hand. Why can't I just type