Trying to connect iMac to new Macbook Pro

Hi,
I just got a new MBP and am trying to network it with my intel iMac (late 2007). I can only connect as a guest. I try to connect as an administrator and am asked for a password. I enter my password and it says it is not correct. I have only assigned one password on my mac and assumed it would be the same one for the network, apparantly not. I am not sure what to do. I have enabled home sharing in itunes and that works. I tried using the generic password for the netgear router but that is not it either. Any thoughts?

Screen sharing setup in 10.5, 10.6 are described by the links by operating system.  10.7 is fairly similar to 10.6.
And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines.  Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist.  There are no Firewire to USB cables.

Similar Messages

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

    I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

    Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
    If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
    Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
    Try your Recovery partition first and if that doesn't work, use Internet Recovery.
    Clinton

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • Connecting old imac to new macbook pro

    I have a five year old imac that I use for photoshop work.  My new macbook pro is so much faster processing big files, I can see the Imac's days are numbered.  Can I use the monitor from the imac with the new Macbook?  How would I connect the two?
    Thanks,

    When I bought my new MacBook Pro, the sales person showed me how to do the V-card method that you suggested. I tried it at home, and it worked. I have been worrying for years about the best way to do this, so was very relieved to find such a simple method. David Pogue in the Tiger Missing Manual also mentioned another tip which I used: he said to select all the address entries you want to transfer (in my case it was all of them) and then just drag the whole lot out onto the desktop. A V-card icon appeared that said: "Name of Person plus 344 others". I then copied that to a flash drive and then onto the new computer desktop. I then dragged it into the Address Book window. As you said it was done in a matter of seconds. Thank you so much!

  • I am having a difficult time downloading HD movies from iTunes. I tried on both my imac and new macbook pro but 95% of the time I get error 8008 (corruption). I can stream HD content from Netflix and hulu w/o problems. I also empty my download folder.

    After it started happening on my imac I tried to download on my ne macbook pro but the same thing is happening. I can stream without any ral noticiable problems from my icloud library, Netflix, and Hulu but when I try to download so I can back them up I get the 8008 error code. I have contacted spple support and am still waitin on an answer. Sometimes the error will happen towards the beginning and other times when it is almost downloaded. I can tell it is atarting when the time remaining starts to fluctuate, then the download bar may stop ans start over. It seems to be an icloud problem but I thought I would check to see if anyone else has had the problem and was able to get it taken care of. It should be noted that everyonce in a while I do get a complete download.

    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~)  refers to your Home directory.
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
    Hope this helps.

  • Transfer CS from iMac to new macbook pro

    I have a new macbook pro and I want to use that instead of my imac. I need help in trying to trasfer my creative suite from one to the other as I presume there is only one licence per product? Anyway - I bought CS3 on disc but then upgraded to CS5 online. I'm not quite sure how I should attempt to do this. Do I install the CS3 and then try and get the upgrade from there?
    Hope I am not being too dumb in asking this. But I am drawing a blank!

    I will move this post to the installation forum since you posted in storage and sharing. You willl be better feedback there.

  • Migrating from iMac to new MacBook Pro

    Currently I have a iMac, serial number QP833*ZE5, 2.4 GHz, with Snow Leopard 10.6.2
    I will be getting a new MacBook Pro shortly.
    What I would like to do is have absolutely everything on the MacBook be a duplicate of what is on my iMac.
    And I can do this by simply restoring the MacBook from my stored iMac cloned disk image.
    So, my question is "Is this OK?", or are there ANY differences at the System level (any at all) between my iMac 10.6.2 and the new MacBook Pro 10.6.2?
    .. or, in any case, would you seriously encourage using Migration Assistant to port from my stored disk image clone? I say "from the stored clone" because this clone is on an external firewire drive which would be connected to the MacBook Pro.
    Thanks in advance for answering.
    John Love
    <Edited by Host>

    As a rule, it is not a good idea to try to restore from an older Mac's startup volume (or a clone of it) to a newer model. This is because the newer model may require a later version of the OS to support its newer hardware & the result will be a new Mac that can't start up. (See Don't install a version of Mac OS X earlier than that which came with your Mac for info about this.)
    However, from Mac OS X versions (builds) included with Intel-based Macs, it appears that currently at least, a new MacBook Pro should be able to boot from any version of Snow Leopard, so a restore from the iMac running 10.6.2 should be OK.
    But keep in mind that Setup Assistant will run the first time you power up your new MBP, & it will offer to run the equivalent of Migration Assistant to copy everything not already installed from another Mac (or a cloned drive of it) to the MBP. Since this will not replace any apps or OS components included on the BMP will older versions from the iMac, but can copy over everything else (except system settings that don't apply & you don't need anyway), it is a good, perhaps even better, option for you.
    Besides, you really don't want to duplicate absolutely everything from the iMac -- many of the files on it are just temporary working files, caches, etc. that the MBP will just discard or ignore.

  • Connect phone to new MacBook Pro in Itunes - "cannot allocate resource"??

    When I connect my iphone 5 to my new MacBook Pro via USB, I get the message "iTunes could not connect to this iPhone.  Could not allocate a resource"
    How can I successfully connect and sync my devices.

    If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
    On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility.  Select the DVD and then hit the "New Image" button.  Disk Utility should offer to create a disk image from the DVD.  I would put that disk image on a USB drive connected to the Pro.  You should be able to mount that image when you connect up to the Air.  Hopefully BootCamp will be able to access that all through the process.
    If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows.  I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB. 
    I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see.  But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive.  While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem.

  • How to export my mailboxes from Imac to new Macbook Pro?

    I am getting a new Macbook Pro 13" today (not sure if it will ship with Snow Leopard). How can I just move all of my mailbox contents, and maybe bookmarks from Safari and other account information over from my Imac Time Machine backup. A few months ago I used my Time Machine from the Imac to move everything over to the new portable, including PHotos and all documents, etc. Is there a way of picking and choosing during setup assistance just a few things.
    The other option is whether I can simply export the contents of my mailbox into a file--two accounts--over to the new computer? Can I do the same with the contents of Iphoto and ITunes?
    Thanks

    See the following:
    Folders You Can Move to Your new Mac
    From the Home folder copy the contents of Documents, Movies, Music, Pictures, and Sites.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/ (copy the whole folder)
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    /Home /Library/Calendars (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    For FireFox:
    /Home/Library/Applications Support/FireFox
    /Home/Library/Preferences/org.mozilla.firefox.plist
    Credit goes Macjack for this information.
    You can connect the two computers with a FireWire cable and use Target Disk Mode to copy from one machine to the other.

  • Problems migrating from iMac to new MacBook Pro

    I just bought a MacBook Pro and am trying to use MA to migrate stuff from my iMac (Intel, OSX 10.4.11) to my MacBook Pro (Intel, OSX 10.6.3).
    Problem is, every time I try ("from" iMac "to" MacBook Pro), my iMac IDs my MacBook Pro and asks for the passcode, I give it, it then asks for the passcode again, I give it again, then it churns away with the message that it's "looking for other computers". On and on and on and gets stuck in this mode.
    I'm using ethernet between the two. Tried wireless also. Same issue. Downloaded the Migration & DVD/CD Sharing Update onto the iMac; it's already on the MacBook Pro. Same problem persists.
    Any suggestions? (among the ten zillion firewire cables I have, none fits the MacBook Pro, so haven't tried firewire yet).
    Thanks.

    See:
    Mac OS X 10.3, 10.4- Transferring data with Setup Assistant/Migration Assistant FAQ
    OS X 10.4- Issues migrating to Mac OS X 10.5 via network connection and Migration Assistant
    OS X 10.4- Issues migrating to Mac OS X 10.5 via network connection and Migration Assistant
    And, selecting Mac Help from the Finder's Help menu and searching for "migrate" should find additional help.
    The 10.5 document may still be useful to you since it specifically deals with the dialog you reported. Obviously it is a known problem if Apple has published a knowledge base article dealing with it.

  • Trackpad do not work properly after migration data from old imac to new macbook pro

    After migration all my Data from my old imac to my new macbook pro (both running on OS Maverick) with migration assistant, the trackpad of the new macbook pro doesn´t work properly any more.
    But the trackpad had worked properly before the data migration!
    But now the trackpad feature of scrolling up and down with two fingers doesn´t work. (Other features are ok.)
    I have tried to change the trackpad settings, but still doesn´t work.
    Can anyone help me???

    You are still under warranty.  Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty. 
    #1 - You have 14 days from the date of purchase to return your computer with no questions asked.
    #2 - You have 90 days of FREE phone tech support.
    #3 - You have the standard one year Apple warranty.
    #4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years.   You can obtain AppleCare anytime up to the first year of the purchase of your computer.
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

  • How to transfer Address Book from old iMac to new MacBook Pro?

    I will soon be getting a MacBook Pro 15" Intel Core i5 with Snow Leopard and want to transfer my Address Book from my old 2003 iMac flat 15" panel running 10.4.11. What is the best way to do that? Is there a particular file or folder that I can copy onto a flash drive to transfer to the new computer? Or can I use my Mobile Me Backup that is on my external drive (or on CD) to do it even though the Backup on the new computer would be a newer version from the older Backup that has the data? I would like to avoid having to use the Migration Assistant if I can, since it looks like that is designed to transfer whole categories of files (like all "files and folders", etc.), which I don't want to do. Thanks in advance for the help.

    When I bought my new MacBook Pro, the sales person showed me how to do the V-card method that you suggested. I tried it at home, and it worked. I have been worrying for years about the best way to do this, so was very relieved to find such a simple method. David Pogue in the Tiger Missing Manual also mentioned another tip which I used: he said to select all the address entries you want to transfer (in my case it was all of them) and then just drag the whole lot out onto the desktop. A V-card icon appeared that said: "Name of Person plus 344 others". I then copied that to a flash drive and then onto the new computer desktop. I then dragged it into the Address Book window. As you said it was done in a matter of seconds. Thank you so much!

  • Transfer iTunes Library and iPhone Sync data from old iMac to new Macbook Pro

    Hi,
    I bought a macbook pro in September last year, previous to this I had an iMac. This has all my music and iTunes stored on it.
    Is there a way to transfer my iTunes over to my new Macbook Pro and sync my iPhone as if my phone thinks it's the same computer, so I don't have to restore my phone or set it up as a new one.
    Thanks.

    harryfromchesterfield wrote:
    Is there a way to transfer my iTunes over to my new Macbook Pro and sync my iPhone as if my phone thinks it's the same computer,
    Yes.
    Simply copy the entire /Music/iTunes folder from old computer to /Music/ on new computer.
    See this -> How to move your iTunes library to a new computer - Apple Support

  • Transfer some items from iMac to new MacBook Pro

    I am buying a new laptop and want to transfer some not all of my files from my iMac to the new MacBook Pro.
    When I bought my iMac 2 years ago I just transferred everything from my old Mac to the new one via USB I think.
    Again I do not want to transfer everything.
    The laptop is a secondary computer to take with us on the road and or my wife can play her games and not try up the main computer.
    Thanks in advance,
    Greg

    Your best bet is to use Setup Assistant when your new Mac first starts up.  Transfer your User accounts and some or all of the contents of the home folders (you can't pick and chose individual files, but you can omit some broad categories).  See How do I set up a new Mac from my old Mac or its backups? for details. Then you can delete what you don't want.
    The reason you should do it that way is, the user accounts on both Macs will then be the same; each account on one Mac will have the same permissions to data for the same account on the other Mac, and other drives as well, such as your backups.

Maybe you are looking for

  • BEx Report Display - Transformation Rule Issue - Urgent

    I have 2 fields one Key Figure : "Amount (Datatype-CURR / length-13)" and one Characteristics : "Indicator (Datatype-CHAR / length-1)" in the source system. I need to display the Amount field with +/- depending on the Indicator field which has only 2

  • Login error when trying to access iCloud Mail

    I am receiving the following error when trying to access iCloud Mail. All other iCloud services are functioning. IS FATAL true APPLICATION NAME mail TITLE Mail could not be loaded MESSAGE There was a problem loading the application due to a possible

  • Audio help wanted exporting to QT and back into FCP.

    I have a sequence with live sound on A1 and A2, music on A3 and A4 and some extra voice on A5 and A6. I have gone into audio outputs and clicked "6 outputs" and "dual mono" for each and tried checking all the options for "Discrete channels" "Stereo d

  • Personalize Absence Details in Oracle Apss R12

    Hi, I have some information in "Absence Details" in oracle Apps R12 such as Absence Status,Absence Category, Days, Hours... I want to add some details in absence details in "Leave of Absence" in oracle Apps R12 like total of days in this year, curren

  • Where can i found out how much my iPhone 4 is worth when trading in for iPhone5?

    One of the apple geniuses mentioned that I could find out how much my iPhone 4 is worth when trading in for iPhone5 at the apple website. I haven't been able to find any sections in the sitre that remotely offer this information. I'm hoping another g