Trying to connect mac laptop to pa to record ?

How do you connect and set up garage band when trying to record off pa music system direct to mac?

leezad wrote:
How do you connect and set up garage band when trying to record off pa music system direct to mac?
if you're using the Mac's line-IN:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal. I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model)

Hello,
I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?

Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2)

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

I have a macbook 15 inch and philips LCD which I'm trying to connect my laptop to. I currently have a HDMI plugged in, but am getting an error message "no video input" on the LCD tv. Please help!

I have a macbook 15 inch (retina display) and philips LCD which I'm trying to connect my laptop to.
I currently have a HDMI cable plugged in, but am constantly getting an error message "no video input" on the LCD tv.
I have checked the philips LCD to be in the HDMI mode and googled many threads but have
not found a solution to solve my problem. Would appreciate any help given!

Hello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H.

Unable to connect mac laptops and windows laptops on network at same time

Hi I have a wrt110 router which has a wired windows desktop attached. I also have several mac laptops connected wirelessly as well as an hp printer ,video game system blue ray player ,ipod,iphone and kindle all which connect with no problem. I have a pc laptop (Dell) which can see and connect to my network but does not connect to the internet . I tried disabling and even temporarily removing the antivirus software plus disabling the firewall but with no success. I am at my wits end because I need the pc laptop for work. The internet will connect to the pc laptop when I hard connect it into the router.
DSL through Earthlink .
Any thoughts would be greatly appreciated.
Solved!
Go to Solution.

Try this. Disable IPv6 on all Win 7 computers under LAN properties for both wired and wireless adapters. Reboot computers. Leave the MAC's turned off for now. Try to connect all the devices except the MAC's. If successful connect the MAC's and if they have issue's, disable IPv6 on those now too. Make sure the WRT110 on on firmware 1.0.04 or above.

Trying to connect second laptop wirelessly but can only use numbers in password field

I've connected my Mac and another PC to my Valet Plus with no trouble. The third PC, running Windows XP, can only be connected as a guest. When trying to connect to this laptop to the home network, the password will only accept numbers.
I've tried changing the PC's security settings, disabling the firewall, etc. Has anyone experienced this problem?

What is the service pack on your computer?
If it is windows XP service pack 1 then I think you will need to upgrade the OS to SP3. Because SP1 will not support WPA/WPA2 security mode.
When you install the router using Cisco connect, the wireless security on the router will be WPA/WPA2.

Mode not supported when trying to connect mac to tv

I'm trying to connect my Mac to the TV as I do nearly every day using my HDMI cable via the apple HDMI adaptor (don't know exactly what that cable is called). But when I try it cuts in and out in fuzziness for a bit then eventually comes up with the error message on my tv "mode not supported". I can't see any visible faults in the cables at all. Do I need to replace one or both of the cables? Or is there something else wrong? If it's the cables, how do I figure which needs replacing without having to buy both if it's only one of them? Help!

Hi Sneuby,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue on connecting to your Television from ThinkPad T440s.
Recently have you updated the system with any of the application or with drivers from Windows update?
Check uninstalling the Graphic driver from the system.
Please let us know the findings once you have performed the above steps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Trying to connect 2nd laptop to WRT54g,

This laptop has only XP installed, I am trting to use a wireless G card. Going through set up I am getting "wireless adptr not installd or software not installed". I didn't have this problem on other laptop, is this missing a driver or something?I tried other card still same result. Tried install with flash drive but can't plug to router as it instructs.Tried manually but it doesn't indicate where the info for WEP etc needs to be entered.

Let me know the Model number of the adapter you are using ..... on the Laptop
So that i can tell you proper steps .....

Trying to connect another laptop wireless,have ???

I get so far,and when it wants a security key,or passphrase, I don't know what I need to put in? Am I making sense it's the last thingI do before I connect to the internet. Hope you can understand me. LOL... TY
TIA...
Oh, What is a ISP?, I have tryed every number I can find, nothing works,says it's wrong.
Message Edited by CountryGirl2 on 07-15-2007 03:13 PM

Hey there CountryGirl2!
Let me start asking you for a few things first and probably we could make a solution out of your problem:
1. What's the model# of your router? Try to look underneath it and you'd see it below the Linksys label. ex. WRT54G v6.
2. Do you have any computer which is physically connected to the router and is able to get online?

Trying to connect three laptops to a WRT54G Router

We never had this issue until today but all of a sudden, the router isn't connecting with my two sons' laptops. Mine is okay. I think the problem has something to do with us all sharing the same address. Should we each create our own network or have a unique identity number to differentiate so it will let us all be on at the same time? I'm not sure where to go to fix this. I know all the numbers and passwords to put in but seem to be missing that one piece of the puzzle to make it all work.
Thanks for your assistance.

Try to adjust the wireless settings on the router and try to reconnect the laptop again.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Click on the Wireless tab... Wireless Network mode should be mixed...Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...Set the Wireless channel to 11-2.462GHz... Wireless SSID broadcast should be Enabled and then click on Save Settings...
Click on the Sub tab under Wireless > Wireless Security...Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey.Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings...Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Trying to connect Mac w/ OSX to Internet through LAN

I have a Mac running OSX (10.1.5) and a PC running Windows XP side to side. Only the PC is connected to the Internet.
I want my Mac to share my PC's internet. I have a router (D-Link) and two ethernet cables. Both are connected to the router (through LAN). I'm not able to get on the internet on my Mac. Is there anything I need to configure on each machine? what exacty do I type in?
also, I am new to being a Mac owner...Used them plenty, but know nothing of networking and other mac settings...very knowledgable about networking PCs.
How can I ping or get a dos-type prompt on a mac?
Thanks for ANY help.

the router is connected to a switch on which the port
where the mac is connected flashes (no connection),
when the pc is connected to it the light is solid
(and internet works). The IP is private 192.168....
If I have this right this is your setup:
|Mac
Internet>router>switch|
|WinXP
we are not at all familiar with networking Macs, but
we have extensive knowledge of networking PCs. The
switch is (i think) a 48 port patch panel and then
connected to router then cable modem (on a seven foot
rack in a guest room closet, if that tells you
anything about our extensive networking).
Yep. Q1... (you've probably tested this, but let's get it out of the way) is there a good network connection to the Mac? I can see several possible points of failure, including the patch cable from the wall, the cable in the wall, the patch cable from the patch panel to the wall, the patch panel...
Q2, assuming that the cabling is good, how is your net set up? DHCP or hard-coded IPs? Are you using IPX (not so good), NetBIOS (very NOT, repeat NOT, good for Macs running 10.1.x), or TCP/IP (very good)?
Q3... OS X 10.1.x was, erm, acceptable, but mostly in comparison to 10.0.x which was not ready for prime time. 10.2.x is much faster, and plays better with others. Is there any way that you could move the Mac to 10.2.x?
Is that what you mean by more information? Could
there be something wrong with the built in ethernet
port on the mac?
That's a distinct possibility. If it's old enough to run 10.1.x, it's old enough that the port could have got fried.
We know for certain that the built
in audio does not work.
Not good. Q4... are you sure you don't have a motherboard problem?

Trying to connection Mac Mini to HD Projector 100 ft away....

Is HDMI an option or will I need to go another route? Setting up a new HD Projector in a church sanctuary and want to get the best picture available out of it.

100 feet is near enough 30.5 metres. This is longer than HDMI or DVI would normally go, and also VGA. What you are going to have to do is use a product that converts the video signal to send it over different cabling and allows you to go a longer distance. I am listing an example product below, you would need a converter at each end, the following is for a pair.
http://www.amazon.co.uk/Cablesson%C2%AE-Extender-Ethernet-Single-network/dp/B003 XFSNSA/ref=pd_cp_ce_4

Connecting my laptop to my Panasonic plasma TV

Hey everybody.
I am trying to connect my laptop to my TV with a HDMI cord.
I've changes my TV to be on the right channel, I've pressed Fn+ F5 but nothing works. I've been told that I need to go into the video card settings in order to press clone / mirror / duplicate, but I cannot find the video card settings. Can anyone guide me through this?
Thanks, Dina

Hi,
With the laptop connected to the Tv with the HDMI cable, hold down the fn key on the notebook and press f4. Use the arrow keys to select 'Projector Only' and hit enter.
Can you see your 'Desktop' on the Tv now?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Connecting my laptop

I am trying to connect my laptop to my new Insignia tv. I lost the instructions. I connected to two cords that came with it. I just need to know what channel to put my tv on to get the signal to show up on screen. We are running our cable through the dvd player. Does it need to be on or off? I'd appreciate any help ASAP. Thanks.

I'm getting the lcd Dynex 42 inch . It didnt specify what the imput for pc was but i call cus service and guy said he had same tv hooked up to pc using vga cable. Said only newer laptops have hdmi out. Mine seems to have just that 15 pin vga plug, will that make picture look like crap?
I'm not sure what you mean by component cables? Is that what you were refering to using the headphone output with cabke linked to?
i'm confused. So with dynex to use as monitor (and with cable tv) do i have 2 options in connecting to pcs with no hdmi or dvi output plugs ? Are you saying the vga cnnect is not a good option ? theres nt much i can do about what outputs are on existing laptop and pc and i cant afford higher end brands of tvs. ive pretty much decided to get the lcd 42 inch dynex after loking over all ads and reviews. The 650.00 price is max i can come up with.

E2000 won't connect to laptop using Easy Setup Key

Running Win7. When trying to connect Lenovo laptop to E2000 with Easy Setup Key, the progress bar hangs at 25%. However, the E2000 will connect to the laptop with an Ethernet cable. Same problem on both of my Lenovo G555 laptops. Any ideas?

I have heard about this concern with Atheros adapters and where it cannot connect with WPA or WPA2. Check if you set the security to WEP if it will connect. (Usually it does). And better check for updated drivers from this website. http://www.atheros.cz/ (manually update the drivers). The automatic update with windows will most of the time load the same driver version. So it would be best to update the drivers manually.

Trying to connect mac laptop to pa to record ?

Similar Messages

Maybe you are looking for