Trying to connect my new Apple TV to my Samsung flatscreen TV is blinking menu is there and can be accesed with the remote, but can be seen for one sec.

Trying to connect my new Apple TV to my Samsung flatscreen TV with a Belkin HDMI cable. Screen is blinking menu is there and can be accesed with the remote, but can be seen for one sec.

Changed the cable and its working.

Similar Messages

  • HT1595 Trying to connect my new apple tv to the wireless network. When I try to use the remote, the Apple TV doesn't respond (doesn't go to the next screen). Could this be caused by a weak wireless signal?

    Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • HT204291 I am trying to connect my new Apple TV to a wifi connection at a hospital.  This apple tv connects at home but is unable to at hospital bc of a web page authentication agreement page.  All of my iOS devices are connected.

    I cannot connect my apple tv to the wifi bc of the web page authentication.  When signing my other iOS devices on the network an immediate web page pops up with a user agreement to check and agree.  How can I do this with the new apple tv?

    Welcome to the Apple community.
    Unfortunately that isn't possible with the Apple TV, the Apple TV does not have a web browser.

  • When connecting my new Apple TV I get "NO PC signal" message.

    When connecting my new Apple TV, I get "NO PC signal" message.
    I rebooted WiFI and restarted Mac Book
    What am I missing?

    What model is your HDTV? Connected using HDMI? Have you ensured you are on the correct input on your TV? Tried a different cable and port?

  • TS4002 I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed but when searching I can't find same being used. How do I find out where that particular email adress is use

    I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    Also
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

  • HT4199 I am trying to connect a new ipad air to my home wireless network. upon entering the password the ipad will not connect to the network. the network is good.

    I am trying to connect a new ipad air to my home wifi network. The ipad sees the network, asks for a password but will not connect. Password and network are good.

    Hi there sibisjo,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W.

  • I am trying to connect my new ipad to my BT Home Hub but keep getting the message unable to join the network, Any advice?

    I am trying to connect my new ipad to my BT Home Hub but keep getting a message saying that I am unable to join the Home Hub network.  Any advice?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT5625 I'm trying to create a new Apple ID but when I was putting on my information, there's a box asking for an ITunes gift code. What's this and how can I get one?

    I'm trying to create a new Apple ID but when I was putting on my information, there's a box asking for an ITunes gift code. What's this and how can I get one?

    You're not obligated to insert a gift code. But you can purchase gift codes on the Apple online store (gift cards or certificates) or Apple Retail store
    Gift codes are pre paid cards so you can use credit on the iTunes Store to purchase content
    To create apple ID without payment method:
    http://support.apple.com/kb/HT2534?viewlocale=pt_PT

  • I have just connected my new apple tv, in the main menu I see only two icons; "computers" and "settings".  Where do I find the icons for internet, movies etc. We do not live in the US..

    I have just connected my new apple TV and in the main menu see only two icons: computers and settings.  How do I access the rest of the icons (internet, movies etc...)  We do not live in the US.  The unit has full WiFi access with no problems, I can access ITunes on my laptop via home sharing no problem.

    Glad that this solved your problem but if you searh past threads there are a LOT of people with identical problems.
    Reading through the threads my take is
    There seems to be something awry with wifi chipset. Typical symptoms are initially being able to connect to connect to a Wifi network then the connection is dropped. Then you see just the 'computers' and 'settings' icons on screen
    Power off, reset and factory restore doesnt seem to solve it
    Occasionally its nearby antenna cables etc causing interference
    One report with convincing evidence it was the HDMI cable, swapping to anotehr cable fixed the problem
    Plugging in ethernet works, this is purely a wifi issue
    Sometimes plugging in ethernet temporararily wakes up the wifi
    Many people seem to have exchanged their units only for the same thing to happen to the new unit a few weeks later. Just wondering if its a fomponent fail or heat issue.

  • HT1222 I'm trying to connect my new 4S phone to my pc.  What do I have to do?

    I'm trying to connect my new 4s phone to my pc for the first time and I don't know why the pc does not see it.  What do I do?

    More details about the PC, please:
    What operating system is it running?
    What version of that operating system?
    When were patches and updates last applied to that operating system?
    What kind of PC is it (i.e. Lenovo, HP, Dell, etc.)?
    How long have you had the PC?
    Have you tried another USB port on the PC?

  • I am trying to create a new Apple password but Apple does not recognize my one and only email so stuck on a merry-go-round. Any suggestions?

    I am trying to create a new Apple password but Apple doe not recognize my one and only email address, so I'm stuck on this merry-go-round. Any suggestions?

    inabird
    you haven't told us what "Park" the "merry-go-round" is in
    tell us what actions you take to get Apple not to recognize your email address...
    Are you formatting it correctly? - username @ someDomain .com <- NO Spaces (I did it so the system wouldn't make an email link out of it)
    Tell us what happens when you realize  that Apple is "not recognizing" your email. What message do you get, exactly? Take screenshot of the entire screen for context
    ÇÇÇ

  • I am trying to review my new apple id and install skype and wats up. i given all credit card details but still its showing error.. pls advise me

    i am trying to review my new apple id and install skype and wats up. i given all credit card details but still its showing error.. pls advise me

    Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

  • Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

    Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

    If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
    Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
    If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
    Post back on your results.

  • Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

    Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

    Fixing this is a two step process:
    1) System preferences > WiFi/Airport ...
    ... check [√] Ask to join new networks
    "Known networks will be joined automatically.
    If no known networks are available, you will
    be asked before joining a new network."
    2) Remove unwanted networks from the list of "known" networks under
    System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
    Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

  • I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

    I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

    I keep saying this over and over, in the hope that people who do a search will find it.  Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there.  The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple.  They're expensive, but they work perfectly.
    My guess is that you bought a cheap MDP to HDMI cable, or have a defective one.  From my reading of these boards over the past few months, cheap cables have a high failure rate.  And the regular priced ones have only a slightly less of one.  Try a new one.  Make sure you do not damage the Thunderbolt port.

Maybe you are looking for

  • 10.7 share to 10.6?

    Hi, i'm trying to share a calendar I've created in iCal in lion with a friend running snow leopard, but he is being asked to upgrade to iCloud. Does he have to do this? Thanks, Andrew.

  • PE7 crashes with 'effects' & 'transitions'??

    Hi All, New user of PE7 and of this forum. I installed PE7 this weekend and have been using it for about 5hrs in total. I'm a novice video editor and have chosen PE7 to get me started with editing my raw AVCHD files from my Canon HG10. My problem is

  • Droid x as a wireless card??

    i heard that you could plug the droid x into your computer and use it for internet like a wireless card. is this true? if so how do you do it?

  • Tomcat 4.1.18 does not response when run on 1 or 2 days

    Tomcat is not close connection after it return a result page. I look in log file. It show some error like this. What error occer on my tomcat server. 2003-04-13 13:45:44 CoyoteAdapter An exception or error occurred in the container during the request

  • WLC5508-LAP1131 HREAP connectivity Problems

    Hi group, I have a problem with Hreap Ap in remote sites. Sometimes, WAN connectivity is loss, and when the WAN access going UP some LAP stay in standalone mode. I must reboot all the ap in standalone mode to recover all my AP in connected mode. I ca