Trying to connect new E70
I just purchased a New E70 Smartphone. The reason I bought a Nokia is because of all the brands it has the best Linux support (at least the largest Linux user base)
But immediately I noticed that I was unable to connect the phone to my PC via the USB data cable. When I first plugged in the phone to my home laptop, the laptop crashed with a kernel panic error message (not good!) But later when I tried to plug in the phone at work (where I have a number of virgin workstations to choose from) I found that it was not even being recognised. Also, I no longer got the option on the phone to choose which type of connection I wanted the USB to be (i.e. PCSuite, Data, IP)
I then tried Bluetooth, which I have to say works with most things. It worked on all my linux boxes and a test XP box I have at work. But when I tried with my VMWare XP machine, PCSuite gives me an error "Cannon use the connection type. Check that all the needed hardware, software and drivers are available."
(To use bluetooth in VMWare I am using a USB Bluetooth Dongle)
I am using an IVT CN-BTU3 dongle, but I don't that is th problm since I am able to discover my phone (and all those around me) and use the bundled utilities to manipulate the phone.
Any ideas on how to get the Bluetooth to work or even the USB cable.
After 4 weeks, I actually received a call from Nokia!
Since I had already solved the problem by buying a DKU-2 cable it was a short conversation, but the tech assured me that the CA-53 cable that came with the phone does work, but he did admit that frequently they do need to "fiddle" with the software to get it to work.
They promised that they would submit a FAQ on what "fiddle" means, but I still haven't seem anything.
What I don't understand is that in my small sampling 4 out of 5 people had the same problem I did and the DKU-2 cable fixed their problem immediately. Which would support my claim that the DKU-2 cable is superior, yet the DKU-2 cable is cheaper (at least on websites) then the the CA-53?
So why include a CA-53 in the first place??
Anyway, my problem is sorted so I hope this thread helps others.
Bob
Similar Messages
-
Trying to connect new MacBook Air to printer (Canon MF4570dn)attached to my PC
I have a new MacBook Air and I am trying to set it up to print to a Canon MF4570dn hooked up via USB to my PC. I have file and printer sharing turned on. The MacBook can see the workgroup --> computer --> printer name. I have tried using Canon's print drivers and generic PCL to no avail. With the former, I get "filter' failed and with the latter, everything seems to work when I look in the printer status (shows that it is waiting to print and then just disappears (as if it has finished printing) - but no printout.
Network is avilable.Hi LindaH51,
If you are having an issue connecting to a shared printer from your MacBook Air, you may find the following article helpful:
OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11070
Regards,
- Brenden -
How do I switch between number and alphabet on printer keypad when trying to connect new router.
HP wireless printer 6500 e709n
Have a new router. Using the printer tools, and network setup, printer can find router but when I input the password using the keypad, alpha characters appears and therefore rejected. Password is numeric. The password cannot be changed because it is provided by ISP and is unchangeable, as far as I know.
I've checked the user manual and there is no mention of how to change between using the 6500 e709n keypad in alpha and numeric mode.Hi hessvette,
When the keyboard appears on the printer display, there should be a ARROW pointing up or a TRIANGLE. Press that, and the entire keyboard changes into CAPS. To enter lower case you need to tap the appropriate letter key twice quickly. The first tap should show a capital and the second should show a lower case letter.
If it is an older type printer with a keypad then you would have to cycle through the letters and numbers. Lets say you want to enter the number '2'. Keep pressing the number 2 button. It will cycle through all the options for that button, ie A,B,C,a,b,c and the 2. You do the same for the other buttons.
I am sending a link for Installing the Printer on a Wireless Network.
Let me know if this helped.
Thank you,
I worked on behalf of HP. -
Stalls when trying to connect new site
The bar moves about 1/2 way across the site I want to open then stalls. Sometimes eventually it will open. Otherwise I have force close and start agin.
What could be causing this? I'm using 6.02 and 10.7.5Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
-
Trying to connect wireless printer, asking for password for time capsule?
Trying to connect new wireless printer and it's asking for my password for my time capsule. I don't remember that I had entered one initially, but maybe I did and just forgot. Any way to retrieve a password for time capsule?
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click on Edit in the small window
Click the Base Station menu at the uppermost top of the computer screen up where the Help, File, Window, etc menus appear
Click Show Passwords -
When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection. I have even tried creating a new apple ID but the same message appears. I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.
I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.
-
im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....
Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com -
I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?
The 30" display needs a DUAL-LINK adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter> -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
Anyone else have this configuration or another similar one with a Panasonic HDTV?
Ideas? Suggestions? Anything?! Help!!
P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
Thanks!Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks. -
I have tried to connect the new mac to an existing time capsule both directly through ethernet and through wifi. Both times I get Internet connection OK but Airport Utility is stuck searching for the base station. I have two existing macs which are connected fine and have both been backing up quite happily. The first two macs are the same user (me) and the new one is for a different user in the house. All the macs are running Mavericks.
I have tried rebooting the time capsule and the new mac - didn't help.
Any information as to what I can try would be most welcome.
Many thanksHi All
I have solved my problem! It was the old chestnut the firewall issue. We have McAfee firewalls on our machines and the wifi network was set up as a public rather than a home network. I changed it to Home or Work and het presto the time capsule appeared. I didn't have this problem with the other machines at all.
I hope this helps someone!! -
Trying to connect a blackberry playbook to the Mac. It says I need OS6. Is that a free update or do I have to buy a whole new operating system? Just want to download some music to the playbook. Also, is it possible to use a iTunes card directly to the playbook and bypass the Mac? Thanks for any info you can provide.
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 or 10.8 is part of the 10.6.6 update.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0 -
Here's the sequence of events:
Setting up a new iMac.
Migration Assistant was aborted during setup and a normal setup was completed.
Then ran Migration Assistant from the newly setup account.
It ran fine, but put all the data in a new account called "user".
Renamed "user" to a new name, renamed the home folder to a new name following these instructions: OS X: How to change your account name or home directory name
Delete the account we originally created, so just have one account with the name we want and all the data, email. Works fine.
Sign into the App Store with the account we share for purchases.
Now, the problem:
Go to System Preferences to setup iCloud with a new Apple ID
Get this error: "iCloud encountered an error while trying to connect to the server."
So I'm unable to setup iCloud for photo stream, FaceTime, etc.
Internet works fine, we can get mail, etc.
Rebooting doesn't help
Ideas?never mind the problem is gone this morning.
-
I am trying to connect IMAC OSx 10.9.4 to Suddenlink thru ethernet connection in New Bern NC. No luck. Any hints?
If you bring up Safari browser, and go to www.google.com, does it give you an error?
It is possible that you are not getting DNS. From the OSX terminal can you run the following two commands
1. dig www.google.com
2. ifconfig en0
3. ifconfig en1
4. ping -c 3 www.google.com
1. Example output...
; <<>> DiG 9.8.3-P1 <<>> www.google.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44161
;; flags: qr rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;www.google.com. IN A
;; ANSWER SECTION:
www.google.com. 92 IN A 173.194.121.18
www.google.com. 92 IN A 173.194.121.20
www.google.com. 92 IN A 173.194.121.16
www.google.com. 92 IN A 173.194.121.17
www.google.com. 92 IN A 173.194.121.19
;; Query time: 43 msec
;; SERVER: 192.168.1.1#53(192.168.1.1)
;; WHEN: Sat Sep 6 17:19:56 2014
;; MSG SIZE rcvd: 112
Example output for commands 2 and 3
ifconfig en0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether b8:e8:56:35:bf:e2
inet6 fe80::bae8:56ff:fe35:bfe2%en0 prefixlen 64 scopeid 0x4
inet 192.168.1.9 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=1<PERFORMNUD>
media: autoselect
status: active
ifconfig en1
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:00:79:ee:b0
media: autoselect <full-duplex>
status: inactive
Example output of 4.
ping -c 3 www.google.com
PING www.google.com (173.194.121.18): 56 data bytes
64 bytes from 173.194.121.18: icmp_seq=0 ttl=250 time=9.049 ms
64 bytes from 173.194.121.18: icmp_seq=1 ttl=250 time=10.568 ms
64 bytes from 173.194.121.18: icmp_seq=2 ttl=250 time=9.393 ms
--- www.google.com ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 9.049/9.670/10.568/0.650 ms -
Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.
Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
Hmm, ideas anyone?
SBB
Maybe you are looking for
-
Multiple Line Items in billing
Dear All, I got one issue on production server,the scenario is like this, My client gives one Free of Cost (Item Category is TANN) On purchase of one material like XYZ(with item category TAN). And while creating Sales order it takes FOC automatically
-
Currency Issue - Customer Statement
Hi All Iu2019m looking for help I have a client that is trading in different currencies, system currency is R and their Bank is USD customers buy in different currencies e.g. Euro, USD, HK$ and in order for this to work from a banking perspective we
-
I am putting the finishing touches on our build system and have run into a show stopper bug in ADT. It seems that ADT will not function propertly over ssh. When I issue my ADT package command remotely on my Mac OS X machine via ssh, ADT simply hang
-
Does anyone know if the MBP C2D 2.16 comes with one 1GB SO-DIMM or 2 sticks of 512M? ben
-
I accidentally pressed the button on facetime where you can't use that email for facetime..... if i restore it will my facetime work??