Trying to connect to an Epson xp 800 printer wirelessly. Any suggestions would be appreciated.

tried to go through epsons setup and it brings up add printer window.  I get lost from this point

We have no idea which iMac you have or which OS X it is running...?
For Leopard and earlier, see > Adding a printer to Mac OS X v10.5.8 or earlier
For Snow Leopard, see > Mac 101: Printing (Mac OS X v10.6)
For Lion, see > Mac Basics: Printing OS X Lion
For Mountain Lion, see  OS X Mountain Lion: Set up a printer

Similar Messages

  • HT4623 I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

    I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • HT204291 My apple tv is not airplaying to any of my devices - the airplay icon is completely gone!  I've reset apple tv, checked home sharing is on, checked my wifi connection is active but still no luck? any suggestions would be greatly appreciated:)

    - the airplay icon is completely gone!  I've reset apple tv, checked home sharing is on, checked my wifi connection is active, no firewalls, but still no luck? any suggestions would be greatly appreciated:)

    What IOS and OS are you using Elissa.  I think from your post it used to work but has dropped off, is that correct or has it never worked?  If it did wotk has anything changed?  Check your wifi use with sopmething like istumbler to see if it is being used by neighbours etc?

  • My iPhone 4S is not showing up in iTunes.  I've never had this issue before, but I'm finding it a little frustrating trying to figure out how to rectify the situation.  Any suggestions would be greatly appreciated.

    My iPhone 4S is not showing up in iTunes.  I've never had this issue before, and I'm finding it a little frustrating trying to figure out how to rectify the situation.  If anyone knows how to fix this problem, please advise.  Otherwise any suggestions would be greatly appreciated.

    Hi Josie,
    I understand that you are having issues with iTunes recognizing your iPhone 4S. Let's see if we can tackle this.
    The following resource will provide helpful steps in resolving this issue, pay specific attention to Steps 3-6 as these usually resolve this sort of issue.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • TS1436 I keep getting unknown error occured(4450) when trying to burn a CD...running Windows Vista, any help would be appreciated

    I keep getting unknown error occured(4450) when trying to burn a CD, running Windows Vista...any help would be apprciated.

    I had this issue to when trying to burn discs recently. I went into the CD creation settings in iTunes and I "unchecked" the option to "Include CD Text" and after I did that, the disc I had been trying to burn several times with error, actually burned without fail. Give that a try and see what happens.

  • I am trying to run a video at (close to) the same time on two different iPads, wondering if one iPad can talk to the other - any suggestions would be appreciated, thx!

    Hello - I am attempting to run a video from one iPad that will playback on itself and a on second iPad.
    Any thoughts would be appreciated - My thanks

    If you don't want an EEM policy, then don't use any of the EEM constructs.  Instead, all you need is this:
    set output [exec "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0"]puts $output

  • Cannot print from Aperture v.2.1.2 to an Epson Artisan 800 printer

    I recently purchased an Epson Artisan 800 printer and I would like to be able to print from Aperture. Unfortunately, I have been unable to do so, in spite of multiple conversations with the Epson support group. I am able to print from other applications, such as TextEdit, Safari, and iPhoto. However, when I try to print from Aperture, I never get any output from the printer. Depending on the image that I try to print from Aperture, I will see an error message flash on the printer's display screen.
    I captured the following error message from the "system.log" file:
    Jan 20 20:11:24 new-host Aperture[12196]: An instance 0xce644a0 of class RKPrintPreviewView is being deallocated while key value observers are still registered with it. Observation info is being leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:\n<NSKeyValueObservationInfo 0xf86da40> (\n<NSKeyValueObservance 0x1c6597e0: Observer: 0xb8c7d10, Key path: selection.isModified, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c641630>\n<NSKeyValueObservance 0xce9b170: Observer: 0xb8c7d10, Key path: selection.gamma, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0xce7e7d0>\n<NSKeyValueObservance 0x1c659830: Observer: 0xb8c7d10, Key path: selection.blackPointCompensation, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c640340>\n<NSKeyValueObservance 0x1c65ef80: Observer: 0xb8c7d10, Key path: selection.colorSyncProfile, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c65d8e0>\n<NSKeyValueObservance 0x1c65d890: Observer: 0xb8c7d10, Key path: selection.dpi, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c6715c0>\n<NSKeyValueObservance 0x1c65eba0: Observer: 0xb8c7d10, Key path: selection.sharpenAmount, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c645070>\n<NSKeyValueObservance 0x1c65ebe0: Observer: 0xb8c7d10, Key path: selection.sharpenRadius, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c645630>\n)
    ----------END of ERROR MESSAGE------------
    I am having this problem on both my iMac G5 and my wife's MacBook. Both are running the latest versions of Mac OS X (10.5.6) and the latest version of Aperture.
    If anyone has been able to print from Aperture to an Epson Artisan 800 printer, please let me know how you did it. Thanks.
    Bruce

    I run 10.4.11 and am unfamiliar with that specific Epson. However step one with Epson troubleshooting is to do any OS updates then download and install the latest Epson driver, even if what you are using is current. The new install will simply install over the old installation. Repair Permissions via Disk Utility immediately before and again immediately after both the OS updates and the printer driver installation.
    Once good Epson paper and a new driver installation are done the final step is to carefully follow Gary Ballard's excellent color management tutorials:
    <http://www.gballard.net/psd.html>
    Good luck!
    -Allen Wicks
    P.S. Epson tech support for consumer printers has always been worse than useless. Specialized support for the pro printers is pretty good.

  • Hello, I currently have a MacBook snow leapord and i'm trying to connect it with my Canon MP560 printer, i put in the CD and installed everything properly but now when i add a printer it says a Queue already exists, i click continue and nothing happens???

    Hello,
    I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
    I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
    So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
    Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
    When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
    had happend. PLEASE HELP
    sincerely,
    Laura.

    I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
    If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
    But, before doing this, download the last good driver, CDs usually contain outdated drivers.

  • I just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone

    i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes

    No support for jailbroken phones will be given in this forum or from Apple.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and…

  • HT1595 Trying to connect my new apple tv to the wireless network. When I try to use the remote, the Apple TV doesn't respond (doesn't go to the next screen). Could this be caused by a weak wireless signal?

    Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

    I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
    The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
    Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
    Thanks

    The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
    If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
    So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
    Assuming your AE is gen3 or greater.
    You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
    And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
    If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
    If your AE is G wireless or earlier model.. really the time has come for replacement.
    If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
    You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

  • I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

    I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

    A reset has nothing to do with Internet access or data access.
    A reset is simply pressing and holding the home and power buttons until the white Apple logo appears.
    What are you really trying to do?

  • I am unable to set up my iCloud as won't let me accept terms and conditions, then says unable to connect to server.  Any help would be appreciated :)

    Please can someone help, I am just trying to set up iCloud on my iPad.  When I click on accept terms and conditions it says unable to connect to server? I have googled how to do this, forums suggest to open a find friends app, then try to reconnect.  It still doesn't work.  Any help would be appreciated, thanks.

    Check this. Settings>General>Date and Time>Set Automatically>On. Make sure that the time zone setting is correct as well.

  • HT1222 Can't download iOS6.1 to iPad b/c msg says I'm not connected to the internet when I am. Any suggestions?

    Can't download iOS6.1 to iPad b/c msg says I'm not connected to the internet when I am. Any suggestions?

    Where do you live? I live in Abu Dhabi, in the UAE. I’m wondering if this problem is related to the internet service provider here – Etisalat is its name. I tried one proxy, but it doesn't work.

  • How do I connect  Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    The FireWire cable is just for the FireWire ports on the display.  The display will run without it.

Maybe you are looking for