Trying to connect to my router through Wi-Fi.

I am trying to connect to my router. My Ipod Touch is connecting and all the settings look correct. When I click on Safari, ITunes, or YouTube it goes to the screen tries to connect then returns to the home screen.
Can someone help solve this problem.
I have tried unplugging my router for two minutes and I also renewed my lease. My router is a actiontec.

Hello and Welcome to Apple Discussions.
That sounds more like the Safari application is crashing rather than a WiFi issue. Try restoring the +iPod touch+ software:
http://docs.info.apple.com/article.html?artnum=305744
mrtotes

Similar Messages

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

HT4199 I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need a

I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.

What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
See:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points

Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
Other questions that may help me (or somebody else) understand your problem better:
Which of the pieces were verified as working before the introduction of the AirPort Extreme?
Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
Are you using the same port on the GT704WGB? Have you tried another one?
If the desktop has multiple ethernet ports, are you using the same one?
Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
What category ethernet cable are you using? 3? 5? 5e? 6?

Troubles trying to connect ECC and XI through RFCs

Hi,
I'm trying to connect XI and ECC through HTTP RFC connections. The bridge between XI and ECC is OK, but the bridge between ECC and XI is not working. It results in the error above:
Service cannot be reached
What has happened?
URL http://brjgs916:8001/sap/xi/engine call was terminated because the corresponding service is not available.
Note
The termination occurred in system XD0 with error code 404 and for the reason Not found.
The selected virtual host was 1-.
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:P-i:brjgs916_XD0_01-v:1--s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Trying to teste the service root
default_host\sap\xi\engine and received the error message "Could not find host or port information". Looking at SMICF the services are functional and seams to work (green checks at right side) in both sides, ECC and XI.
Some one knows what happens and could help me?
Thanks

Hi,
>>>>I'm trying to connect XI and ECC through HTTP RFC connections
>>>>Troubles trying to connect ECC and XI through RFCs
what exactly are you trying to do?
connect via ABAP proxy (HTTP) or via RFC ?
if via proxy:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
if RFC:
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Trying to connect a wireless router to a switch

We have an 8 port router in the closet(linksys) with the cable connection and in our main room we have a five port 10/100 (By linksys) switch that connects to the system just fine all hardwired, and we have internet already working off of that.
We tried to connect the WRT54G wireless router to the switch because we asked at the store and they said if we had a switch already that's what we'd want. I changed the ip address on the new router to the 192.168.2.1, saved the settings and then tried to plug it into the switch. As soon as we plugged into the switch, anything else connected to the switch stopped getting internet. I also tried to just leave it at the default and same problem. I tried the 'change the IP address to 192.168.1.2 and disable DHCP server and then going into advanced and changing gateway to router and again, same problem. Regardless of what I do anytime I plug that wireless into the switch everything on the switch stops working.
How would we get both the switch and the router to work?

I assume that you want your wireless and your wired computers to all share the same network, and all connect to the Internet through your 8 port router in the closet. And the 8 port router uses the 192.168.1.x address space. --- is that all correct?
If so, disconnect the WRT54G from the rest of your network, then using a computer wired to the WRT54G, do the following:
a) set the "Local IP address" (not the "Internet Connection Type" address) to 192.168.1.2 I am assuming that you are not using this fixed adddress elsewhere in your network.
b) Leave the DHCP server set to "disabled".
c) Wire any port from your 8 port router or switch, to any numbered port on the WRT54G. Do not connect anything to the "Internet" port on the WRT54G.
Note that with this setup, your 8 port router will control your router settings (port forwarding, DHCP server, firewall, etc.). Your WRT54G will only contol your wireless settings.
If you need more help, please state the model of your 8 port router and switch.
Message Edited by toomanydonuts on 08-04-2007 01:39 AM

How to connect to my router through airport

I can connect to my router configuration page when i use a direct ethernet connection, and use 192.168.1.1 in Safari.
However, does any one know how i access this page when the router is plugged into my airport base station, and i am wirelessly connected to the Airport network.
Thanks.

Yes I know the IP address when connected directly with an ethernet cable- 192.168.1.1
This works fine with ethernet, but I wanted to see if there was a way to connect when the router is connected into my airport, and I am connected to the airport network. The Airport is distributing the IP addresses, and the router is in bridge mode, simply supplying the internet signal on to the airport base station. The base station is controlling my PPPoE.
My router has a configuration page with my web info, such as speed, and other statistics. It is useful to refer to to see if I am getting a good speed.
If it can't be done, then so be it. But just thought there would be a way to connect through the airport and on to the router.
Thanks for you advice.

Trying to connect to zyxel router

hi i'm in switzerland for the weekend and trying to connect to a zyxel p-355 router. i tried with wep 64 and 128 bit, channels 1 and 6, but couldn't connect. i then turned wireless security off altogether for a test, but still no joy which suggests the fault is not security.
i'm now connected via windows in boot camp. i'd like to get it fixed for the mac as 1) id rather use os x while i'm here and 2) my swiss friends who i'm staying with have macs and want to log on as well without having to buy windows!!
any ideas gratefully appreciated?

Thanks,
mac filtering is disabled.
the problem can't be the wireless security settings as i've disabled security completely and still couldn't connect with a macbook pro and a macbook.
Like i said i can connect with windows no problem regardless of security or channel.

Trying to connect to a printer through a windows shared printer

I have two printers connected to a Windows machine. On that machine I have shared both printers. A Brother and a color HP 3600N. When i go into print setting and try to set them up I can see both.
I connected to the Brother Printer and it is working fine.
I tried to connect to the HP 3600N but the print driver was not available for that machine. I went to HPs web site and downloaded the driver and did the install. I rebooted and tried again. Still the HP 3600N driver was not showing up.
I tried using two other print drivers the 3500 and the 3700. With both I was able to "connect" to the printer, but the printer only printed garbage.
In order to make sure the printer was working with the Mac. I disconnected it from the PC and directly connected it to the Mac. It found it immediately and the 3600N driver appeared...the printer worked fine.
I then disconnected it from the mac and reconnected it to the PC...rebooted etc.
Then i tried to find the printer again. Once again that print driver 3600n was not available.
How can I over come this. I need to have both printers connecting to the PC for now
Thanks
Mark

Look at the printer sharing instructions on the invaluable iFelix Tech Notes site.
If problems persist, check System Preferences -> Sharing -> Firewall -> Advanced and if necessary clear/uncheck the options to block UDP traffic and enable stealth mode; as long as you're behind a NAT router, those options aren't essential. Windows does seem to put out a slew of UDP traffic, and I've found that blocking UDP/enabling stealth mode block my home eMac from seeing the Windows machine to which a shared HP printer is connected.

Airport utility is not working on Windows. I can configure Airport Expresses with the Macbook but multiple computers with Windows and the latest Airport Utility time out after trying to connect to the router for setup.

I have been trying to setup Airpot Expresses (both old and new models) for a while now with the Airpot Utility 5.6.1 for Windows without any luck. I have tried this on multiple windows machines, factory reseted the devices if I needed to, but I have not had any success since this software arrived. I see the routers on the Airport Utility UI, I click on it then try to connect to set it up. At this point, it gets stuck with a long progress bar trying to connect to the device without any success. I also have a Macbook Pro, and this device & software has had no trouble setting up the routers. The problem is, we are shipping these small routers out to customers who use Windows machines and it is vital that the user can modify the settings using Airpot Utility. I am at a loss for what to do and if we can't find any solutions, we are going to move on to a different company for the routers we ship out.

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

Error code 0XB80ACAA8 on my printer, when trying to connect to my router

Dear Support, I bought the printer 2 weeks ago. It worked perfectly, but since today I get the error code 0XB80ACAA8 when I try to connect to the Router. Can you tell me where the code stands for and what to do in order to resolve this?

Hello, Please try the below steps. remove the cartridges.Unplug the power cord from back of the pritner.power Off the wireless router.Wait for 60 seconds.plug in the power cord to the printer only.install cartridges when prompted.If issue still exits, its time to replace the printer.Now power on the wireless router.If issue still exists, then check if there is a firmware update for the router. Also change the router settings Channel = 11, mode= B/g. Frequency = 2.4 GHzIf issue still persists, then its time to replace the printer. Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.

Trying to connect to the net through Ethernet

Here's my situation:
I have a LAN using Sitecome Homeplugs, which create a network using the existing electricity network: from the modem runs a wire to one Homeplug unit (which is plugged into the wall socket), and two of my computers (both Windows XP) are connected to their own Homeplug units. At first it didn't work, but then I set the LAN setting for those two to Automatically assign IP-address. That's all there was to it.
Now I'm trying to do the same thing on my iMac. I have my unit plugged into the socket, the cable plugged into the Ethernet port. In the Network Status it says: "Built-in Ethernet is currently active. Built-inEthernet has a self-assigned IP-address and may not be able to connect to the internet." How do I set this up? I've looked everywhere but I couldn't find anything.
P.S.: I used to connect through a wireless Airport network. Might that have anything to do with it? (Like past settings?)

Yes it is, very perceptive.
Find IP on computers...
http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/
Try setting the Mac to Manually instead of DHCP in Networks>TCP/IP>Configure IPv4.
Like
IP: just one or two diff from the two PCs.. maybe 10.0.0.146
Mask: 255.255.255.0
Router: 10.0.0.138
May also need these in Network>TCP/IP>DNS Servers:
208.67.222.222
208.67.220.220

Unable to establish VPN connection on rv016 router through QuickVPN

We have an RV016 router with a VPN tunnel configured for remote access called Home. I installed the QuickVPN software that came with the router and tried to establish a connection. I get an error right away stating that a connection couldn't be established and lists some probable problems. I downloaded the latest QuckVPN application and again tried to get a connection and get the same problem. When I check the wget_error file it says bad port number. I have the software configured to use Auto for the port number. I also disabled the firewall as suggested and still the same error. It's an XP client with SP3. Is there a way to tell what port the tunnel is using and maybe set that port number and maybe get a connection?

Ok, try to do the following:
- Go to the VPN clien Accounts and generate a new certificate, DO NOT EXPORT IT.
- On the local machine, remove the previous certificate.
- Try to connect again, you will see a warning message in regards to the certificate, hit NO and continue.
Hopefully that will get it to work.

Trying to connect modem to router

Hello..
Please bear with me, I am new at this..OK?
I am trying to hook up my wireless router to my DSL modem.
My modem is using a USB connection!
How do I hook up my router and/or modem?
The power and WLAN lights are on, but not the #1
Model number of my router is: WRT54GS
Any help would greatly appreciative
"Meet A Stranger..Make A Friend!"

Thanks, My modem is using the USB port for connection and it does have Ethernet capabilities! So, how do I connect the router using the Ethernet on the router and modem.
Also, the number 1 light still does not light up!
TIA
Also, I can not connect to 192.168.1.1
Message Edited by quietstorm on 09-19-2007 04:32 AM
"Meet A Stranger..Make A Friend!"

Slow connection with WRT160N router through wired & wireless

When I connected directly to my cable modem, I got ~10Mbs. But when I connected through my new WRT160N router with either wired or wireless, I got only half the speed, which is 4-5Mbs. Anyone know why or any idea how to change the setting to make the connection faster. Any help would be appreciated. Thanks.

Login to the web administration interface and under the security tab disable SPI (stateful packet inspection). This feature is designed to detect wan interface attacks (ping of death) and block the sender. It kills your throughput for your internet connection. Try xferring a file across your lan (wireless to wired pc) and check your N speeds. The xfer speed should be 100mbps since the wired pc will most likely be limited to 100mbps by your nic. If lan speed is slower than 100mbps (assuming you have and are using N standard) then you may have a bad router. Definitely disable SPI though and that should fix your slow wan speed.

Trying to connect to my router through Wi-Fi.

Similar Messages

Maybe you are looking for