Trying to connect to Windows on LAN with MacBook outside of LAN

Folks, I've scoured the support site thinking someone else has had this issue but no luck...I have a LAN powered by an Airport Extreme. I am trying to use my MacBook to access a Windows PC back in my LAN.
Within the Airport Utility, under the advanced settings -> Port Mapping -> selected "Remote Login - SSH" as the service and put the IP address of the Windows machine within the Private IP Address field.
Using Microsoft RDC for Mac on my MacBook, the computer name is the address of my ISP. For this RDC account, the login credentials are correct with the Domain field listing the same IP address as is in the Private Address field within Airport Utility.
However, it will not connect. I am lost on this and would love any insight.
Thanks!

charlesdeanda wrote:
changed the line in settings.
in the right place:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)
I have read that some guitars will need some sort of amplification.
http://www.bulletsandbones.com/GB/GBFAQ.html#pluginguitar
(Let the page FULLY load. The link to your answer is at the top of your screen)
Does this mean that these guitars have no sound/input at all
no
, or have some sound/input but very low.
yes
I just want to make sure its not me or the guitar thats the issue before i invest in some amplification
a wise choice. so far my guess is it's a setting, you should hear something if everything is set correctly.
will imic help? does it amplify?
i would not recommend it, but it could work, yes.

Similar Messages

  • I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

    I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine.  Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
    The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection.  Sharing is also turned on in the Windows printer control panel for this printer (under properties).  The Mac is a G5 running 10.5.8.  When I try to print a page from the Windows machine it gets hung in the print queue.
    Any advice how to proceed would be appreciated!
    thx,

    I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine.  Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
    The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection.  Sharing is also turned on in the Windows printer control panel for this printer (under properties).  The Mac is a G5 running 10.5.8.  When I try to print a page from the Windows machine it gets hung in the print queue.
    Any advice how to proceed would be appreciated!
    thx,

  • TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

    Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

    Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

  • I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

    I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

    Hi Gilly,
    I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt.

  • I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
    What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

  • I am trying to connect oracle develper suit form with oracle 10g database

    i am trying to connect oracle develper suit form with oracle 10g database
    but when i pass username and password
    this message apperars
    ORA-12560:TNS:protocol adapter error
    every time even i try to connect Report or Designer each time same problem
    making no connection .
    can any body help can help me to reslove this prblem
    Arshad khan

    Duplicate thread:
    Re: connection problem

  • Trying to connect to Window server

    Hi all,
    If anyone could help or suggest a solution I will be forever grateful!
    I'm using a MacPro (OS X 10.5.7) at work to try to connect to a windows server. But they coming up with excuses left right and center to avoid giving it...
    Here what we're using:
    "It is a proprietary system made by a San / Nas provider & is a mix of both.
    On this system it is only possible to set the folder structure to use the following protocols, cifs (how windows connects) & NFS (how unix connects). The applemac can use either afp or smb as it’s explorer like protocol.
    This is why we need to connect the windows PC to the server (as it talks to the server in cifs & windows knows what that is)."
    I asked:
    "But you stated that NFS? Macs can use CIFS protocol and I’ve successfully connected to GROUPDATA. I’m just having trouble viewing the files. Would you be able to configure the permissions to at least read only?"
    Support replied with:
    "The server is no longer licenced for NFS, it is CIFS only. Saved money on licencing.
    When you go to the groupdata area you can see all of the top level folders, but cannot get any lower. It is not a permission thing. We use DFS to get to the folders underneath. The group data area is a virtual area (not real folders). That part uses windows but the folders below groupdata\newmedia (for example) use the filer& the cifs protocol."
    PLEASE HELP!!!!
    Thanks,
    Hal
    Message was edited by: Halmat

    Its a while since I used the software but I seem to recall it can register the client in active directory, hence the network admin password. This would be typed in by a Windows Network admin not by the user and only required the once.
    Anyway there is evaluation email support so they can answer questions about their software much better than I can. Be interesting to confirm if it will do the job.
    Just seen the post from Halmat, this would confirm what I thought. Please contact Thursby I am sure it can be sorted.
    regards

  • I got the error ORA-12154 trying to connect my app but not with the SQLplus

    Hello! i need your help,
    I have a client (Win XP SP2) and i'm trying to connect to the database in the server (Windows 2003, Oracle 10G) using the SQL plus, this is ok, but i try to do it throught the application developed in Developer 6i and i cannot, i got the error: ORA-12154 TNS:could not resolve service name. I tried to solve it by setting the env. var TNS_ADMIN and i still have the same error.
    Could anyone help me?, please

    Hi,
    Check for following file TNSNAMES.ORA at location;
    C:\<Forms-directory>\NET80\ADMIN
    See, if your service name is added to your file. If not then add a new entry like;
    gsm.world =
    (DESCRIPTION =
    (ADDRESS = (COMMUNITY = tcp)(PROTOCOL = TCP)(Host = 10.0.1.22)(Port = 1521))
    (CONNECT_DATA = (SID = gsm))
    Where:
    gsm.world = your service through which you connect to databse.
    Host = ip address of machine where oracle server is running.
    sid = name of your database
    If you already have entry of service in TNSNAMES.ora file then paste you service here as is did , so that we can check because the error you are facing is only due to service problem. Please update........

  • HT1665 I am trying to connect my Samsung Bluetooth device with my new Iphone 4S.  Can anyone explain how this is done?

    I am trying to connect my Samsung Bluetooth device to my new Iphone 4s. Can anyone explain how this is don?

    Which Samsung Bluetooth device?
    Please note that the iPhone will not pair with other phones, tablets, etc for purposes of file transfer.

  • Help with OBDC connection in Windows 7 64bit with Office 2010 32 bit.

    Hi,
    Many moons ago I wrote an application in Java that configured XP machines after they were sysprep’d and deployed. I am currently migrating all our workstations to Windows 7, and was checking my application still worked and queries the correct registry keys etc.
    As it turns out however I don't even get going as I believe the application is unable to connect to the ODBC Microsoft Access Driver in Windows 7 64bit with Office 2010 32 bit. Below is the code I have always used and no longer works. I am hopeful that someone can tell me how to modify the command to work on Windows 7 64bit. If I browse to C:\Windows\SysWow64\OBDCad32.exe all the drivers I need are there I think, but if I open OBDC from Administrative Tools the Drivers tab is empty but for SQL. Anyway I will shut up and below is the code I used to use:
         public IOMakeConnection()
         dm = new DisplayMessage();
         ioed = new IOEncryptDecrypt();
         url = "jdbc:odbc:DRIVER=Microsoft Access Driver (*.mdb);DBQ=" + getPath() + "Config.mdb;Uid=admin;Pwd=password";
              try
              Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
              connection = DriverManager.getConnection( url );
              catch( Exception e )
              system.out.println( "" + e );
              errorObtainingPath();
    The exception is always thrown as my little app that requests the database path always loads.
    Thanks in advance,
    Cheers Kris

    Hello again,
    Sorry for the delayed response, I have been out of the office for a few days.
    I have solved the issue, and as stated above the issue was the way I was launching the application. Below is a summary of the issue and the resolution.
    My problem was that in Windows 64bit if you click on ODBC in Administrative Tools the Drivers Tab only includes an SQL Driver, and my code reference a Microsoft Access Driver to query the database. That said however if you browse to C:\Windows\SysWow64 and open obdcab32.exe it opens the 32bit version of ODBC, and the Microsoft Access Driver (*.mdb) is listed.
    Basically what I need to do therefore is get my code to access the “32bit” version of ODBC in a Windows 7 64bit environment, so my application was able to read the necessary information from the Access Database associated with it.
    I understand that this is not a coding issue directly, but assuming people still use Java to open an Access Database on a Windows 7 64bit OS, this may be of help.
    So previously I ran the following command, from the “Target” box in a shortcut to execute the java code:
    cmd.exe /C SET CLASSPATH=C:\SCAConfigurationUtility && CD\SCAConfigurationUtility && JAVAW SCAConfigurationUtility
    Windows 7 64bit, defaults to the 64bit version of Java, and just seems to plain fail if you only have the 32bit version installed. To overcome this I forced the java executable that I was using to be the 32bit version, and used the system switches available in Java 7 (-cp does not appear to be available in Java 6)
    So my Shortcut now has this in the “Target” box:
    java.exe -d32 -cp C:\SCAConfigurationUtility SCAConfigurationUtility
    And this in the “Start in” box:
    "C:\Program Files (x86)\Java\jre7\bin"
    Or by using the target below the same shortcut works in XP
    "C:\Program Files\Java\jre7\bin"
    Thanks for all the help,
    Regards Kris.

  • Trying to launch modal window in safari with Applescript

    Hello,
    I am writing a web-based app that needs to launch a modal browser window from an applescript file. No addressbar, no toolbar, etc. (the pc side uses a .vbs file to do the same thing.) It's like a popup, but this is from my app. Im not launching it from another web page.
    I can do it with applescript and "System Events" :
    tell application "Safari"
    activate
    make new document with properties {URL:"http://IPADDRESS/default.aspx"}
    do JavaScript ("self.resizeTo(500,480);") in document 1
    tell application "System Events"
    keystroke "B" using {command down, shift down}
    keystroke "/" using command down
    keystroke "|" using command down
    end tell
    end tell
    But this affects the entire Safari application so new windows opened by the user appear the same way. I need it to only affect the window that is opened. I tried some JS "toolbar=no" type commands but it did not have any effect. I must admit my JS and AS is very basic at this point so it could have been poor syntax..
    Can any of you fine folks suggest a way to do this?

    It's not what you want to hear, I'm afraid, but as far as I know there's no way to directly access placeholders other than the title and body in Keynote.
    I did see mention of parsing XML to change values of individual items, but it might be overkill for what you want to achieve.
    Perhaps if you explain what you are trying to do someone will come up with a helpful suggestion.

  • How do I add Macbook air to my windows network and how do I connect to windows shares from said Macbook?

    Finally, I have a "clued in" boss who wanted a Macbook air.  I have it, and I can get to the internet by supplying the correct proxy credentials.  My issue is trying to connect him to windows shares on my network?  I know how to do this cold for adding a PC, But need some 101 on how to take this awesome macbook air and add it to the domain and how to get connected to various shares within my DOMAIN.  as well as use network printers (I assume that is pretty easy). . .  I should add that I can ping the servers in question, I am just not familiar with how to connect to them via Mac. . .I am sure this is laughably easy, I am the king of making things difficult, I swear!
    Thanks for any and all help as usual!!
    Dave

    Which os do you have?
    Check Apple's Knowledge Base for Printer Troubleshooting solutions and suggestions for your particular os.

  • Trying to connect my iPhone 5s to my macbook pro

    Hi there,
    Im new to Mac and have just got my first macbook pro. Im trying to take advantage of the iPhone and mac feature that lets me answer and make phone calls on my macbook, and I'm having trouble connecting my iPhone and macbook together. Ive tried to connect them using bluetooth, but it comes up with an error saying that "Adrians Macbook Pro" is not compatible.
    Thanks in advance.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Cant connect to bt hub wirelessly with macbook

    im a student and i have tried to connect with the BT home hub through airport and i wont work even with internet setup program it didnt work can anyone help?

    See if this helps.
    http://www.thewatchmakerproject.com/journal/364/connect-mac-osx-to-bt-home-hub-w ireless

  • Error trying to Connect to WSE 2012 R2 with Connector Software - The server is not available

    I had to completely reset my MS Surface Pro 3 due to virus activity, so it was wiped and reinstalled. It had previously connected to the Server without
    hiccup. Ever since doing this I cannot reconnect using the SERVERNAME\Connect process - it continually fails. I have reviewed the forums and web for a week trying different solutions to no avail. I would appreciate it if someone could advise?
    I have:
    Ensured that the Connector Software update is not installed from Installed Updates
    Checked the Bindings in IIS Manager against the WSS Certificate Web Service and it is set to SERVERNAME.
    Ensured my time on the Client is synchronised
    Tried connecting using the original PC-Name and when that didn't work, I have tried a new name and removed the old device from the server.
    I have ensured that I am on a Workgroup.
    The install process finds the server sets up connector and asks for my network user name and password and then continues for a fair time until it
    comes back with the error”:
    "The server is not available/ Try connecting this computer again, of for more information, see Troubleshoot connecting computers to the server.”
    I am not sure how much of the log to include as it all doesn’t fit:
    [1380] 150118.132140.0358: ClientSetup: Start of ClientDeploy
    [1380] 150118.132140.5201: General: Initializing...C:\windows\system32\Essentials\ClientDeploy.exe
    [1380] 150118.132140.5201: ClientSetup: Create client deployment registry subkey if necessary
    [1380] 150118.132140.5358: ClientSetup: The initial launching way: -LaunchedFrom:installer
    [1380] 150118.132140.5358: ClientSetup: The initial state is set
    [1380] 150118.132140.5358: ClientSetup: The initial serverName: 192.168.1.100
    [1380] 150118.132140.5358: ClientSetup: Loading Wizard Data
    [1380] 150118.132140.5670: ClientSetup: Saving Wizard Data
    [1380] 150118.132140.5826: ClientSetup: Current DeploymentStatus=Start
    [1380] 150118.132140.9420: ClientSetup: Showing the Client Deployment Wizard
    [1380] 150118.132141.0670: ClientSetup: Machine name:SURFACE3RUTH, length:12
    [1380] 150118.132141.0983: ClientSetup: The input server name is 192.168.1.100
    [1404] 150118.132141.1295: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1404] 150118.132141.1295: ClientSetup: Running Task with Id=ClientDeploy.PreConfiguration
    [1380] 150118.132141.1295: ClientSetup: InitWizard, The currrent stage is ConnectingToServer
    [1380] 150118.132141.1295: ClientSetup: Set the Deployment Sync Event
    [1404] 150118.132141.1764: ClientSetup: The configuration cab will be downloaded from 192.168.1.100
    [1404] 150118.132141.1920: ClientSetup: Download file Setup.cab from server
    [1404] 150118.132141.2233: ClientSetup: Making web request: https://192.168.1.100//connect/default.aspx?Get=Setup.cab&LanguageId=2057&64bit=1
    [1404] 150118.132141.5358: ClientSetup: Failed to download Setup.cab from server: System.Net.WebException: The underlying connection was closed: Could
    not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
    at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
    at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
    at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
    at System.Net.ConnectStream.WriteHeaders(Boolean async)
    --- End of inner exception stack trace ---
    at System.Net.HttpWebRequest.GetResponse()
    at Microsoft.WindowsServerSolutions.ClientSetup.CSCommon.DownloadFileFromConnectSite(String outputDirectory, Uri serverUrl, String fileName, Int32 languageId, Boolean is64bit)
    [1404] 150118.132141.5358: ClientSetup: Cannot get configuration file with https, will try http...
    [1404] 150118.132141.5358: ClientSetup: Download file Setup.cab from server
    [1404] 150118.132141.5358: ClientSetup: Making web request: http://192.168.1.100//connect/default.aspx?Get=Setup.cab&LanguageId=2057&64bit=1
    [1404] 150118.132141.7233: ClientSetup: Downloaded file C:\windows\Temp\ClientDeploymentTempFiles\Setup.cab
    [1404] 150118.132141.7233: ClientSetup: The configuration cab is downloaded to C:\windows\Temp\ClientDeploymentTempFiles\Setup.cab
    [1404] 150118.132141.9264: ClientSetup: Adding Server Info data in the Product Registry
    [1404] 150118.132142.8170: Networking:DnsEnvironmentDetector: Dns.GetHostAddresses threw exception: System.Net.Sockets.SocketException (0x80004005):
    No such host is known
    at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
    at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)
    at Microsoft.WindowsServerSolutions.Networking.ServerDiscovery.DnsEnvironmentDetector.GetAddressesFromDns(String machine)
    [1404] 150118.132142.8170: DnsEnvironmentDetector: No result from GetHostAddresses(), normal environment
    [1404] 150118.132142.8170: ClientSetup: Exiting PreConfigTask.Run()
    [1404] 150118.132142.8170: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has TaskStatus=Success
    [1404] 150118.132142.8170: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has RebootStatus=NoReboot
    [1404] 150118.132142.8170: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [1896] 150118.132158.7568: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
    [1896] 150118.132158.7568: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1896] 150118.132158.7568: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
    [1896] 150118.132158.7880: ClientSetup: Entering InstallRootCertTask.Run
    [1896] 150118.132158.7880: ClientSetup: Install root cert to local trusted store
    [1896] 150118.132158.7880: ClientSetup: Exiting InstallRootCertTask.Run
    [1896] 150118.132158.7880: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
    [1896] 150118.132158.7880: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
    [1896] 150118.132158.7880: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [1896] 150118.132158.7880: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
    [1896] 150118.132158.7880: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1896] 150118.132158.7880: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
    [1896] 150118.132158.8193: ClientSetup: Entering SetupVpnAndDATask.Run
    [1896] 150118.132158.8974: ClientSetup: Exting SetupVpnAndDATask.Run
    [1896] 150118.132158.8974: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
    [1896] 150118.132158.8974: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
    [1896] 150118.132158.8974: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [1896] 150118.132158.8974: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
    [1896] 150118.132158.8974: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1896] 150118.132158.8974: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
    [1896] 150118.132158.9286: ClientSetup: Entering ValidateUserTask.Run
    [1896] 150118.132158.9286: ClientSetup: Validating User
    [1896] 150118.132158.9286: ClientSetup: Call MachineIdentityManager.GetMachineStatus
    [1896] 150118.132200.2412: ClientSetup: Current Machine Join Status: NotExists
    [1896] 150118.132200.2412: ClientSetup: Exiting ValidateUserTask.Run
    [1896] 150118.132200.2412: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Warning
    [1896] 150118.132200.2412: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
    [1896] 150118.132200.2412: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [1896] 150118.132203.5996: ClientSetup: User has chosen to continue using domain admin credentials
    [1896] 150118.132203.5996: ClientSetup: Running JoinNetwork Tasks at WizardPage DomainUserCred
    [1896] 150118.132203.5996: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1896] 150118.132203.5996: ClientSetup: Running Task with Id=ClientDeploy.JoinDomain
    [1896] 150118.132203.6152: ClientSetup: Entering JoinDomainTask.Run
    [1896] 150118.132203.6152: ClientSetup: Domain Join Client to Server Domain: ClientComputerName=SURFACE3RUTH ServerDomainNetBiosName=AHYICK
    [1896] 150118.132203.6152: ClientSetup: Trying to evaluate if we need to set Local Nic Dns address be the same as server DNS setting.
    [1896] 150118.132204.4590: ClientSetup: DNS failed to resolve server's host name, needs set DNS
    [1896] 150118.132204.4590: ClientSetup: Trying to set DNS setting.
    [1896] 150118.132204.4590: ClientSetup: Configure DNS settings on local NIC
    [1896] 150118.132205.7153: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132206.7787: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132207.8293: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132214.6885: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132224.7076: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132234.7311: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132235.8561: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132236.9186: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132237.9655: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132244.8406: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132254.8601: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132304.8898: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132306.0148: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132307.0461: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132308.1131: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132314.9742: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132324.9961: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132335.0140: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132336.1495: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132337.1888: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132338.2320: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132345.1355: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132355.1699: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132405.2086: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132406.3337: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132407.3883: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132408.4351: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132415.3043: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132425.3696: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132435.4170: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132436.5769: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132437.6137: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132438.6607: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132445.5693: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132455.5861: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132505.6068: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132505.6068: ClientSetup: Could not successfully set the DNS of any client NIC
    [1896] 150118.132505.6068: ClientSetup: Failed to set Local Nic Dns address as the Server IP.
    [1896] 150118.132505.6068: ClientSetup: NetGetJoinInformation (server = [], ...)
    [1896] 150118.132505.6148: ClientSetup: Running Join Domain
    [1896] 150118.132505.6148: ClientSetup: Disconnect any share to the server.
    [1896] 150118.132505.6148: ClientSetup: NetUseEnum (UncServerName = [] )
    [1896] 150118.132505.6304: ClientSetup: NetUseEnum (UncServerName = [] )
    [1896] 150118.132505.6304: ClientSetup: Trying to clear dns cache.
    [1896] 150118.132505.6304: ClientSetup: ComputerMgmt.FlushDnsCache starts
    [1896] 150118.132505.6461: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\windows\system32\ipconfig.exe" /flushdns
    [1404] 150118.132505.6832: ClientSetup: Standard Ouptput:
    [1404] 150118.132505.6832: ClientSetup: Standard Ouptput: Windows IP Configuration
    [1404] 150118.132505.6832: ClientSetup: Standard Ouptput:
    [3964] 150118.132505.6832: ClientSetup: Standard Ouptput: Successfully flushed the DNS Resolver Cache.
    [3964] 150118.132505.6832: ClientSetup: Standard Ouptput:
    [5080] 150118.132505.6832: ClientSetup: Standard Error:
    [1896] 150118.132505.6832: ClientSetup: The exit code of the process (C:\windows\system32\ipconfig.exe) is: 0
    [1896] 150118.132505.6832: ClientSetup: Calling SetPrimaryDnsSuffix.
    [1896] 150118.132505.6832: ClientSetup: SetPrimaryDnsSuffix (AHYICK.local)
    [1896] 150118.132505.6832: ClientSetup: SetComputerNameEx (AHYICK.local)
    [1896] 150118.132505.6832: ClientSetup: Update tcpip Domain parameter with AHYICK.local
    [1896] 150118.132505.6832: ClientSetup: Calling join domain [AHYICK.local] with domain user [AHYICK.local\Basil] credential.
    [1896] 150118.132505.6832: ClientSetup: Joining local machine to domain AHYICK.local
    [1896] 150118.132505.6832: ClientSetup: NetJoinDomain( , AHYICK.local, , AHYICK.local\Basil, *, NetSetupJoinDomain, NetSetupAcctCreate, NetSetupAcctDelete,
    NetSetupDomainJoinIfJoined, NetSetupDeferSpnSet)
    [1896] 150118.132505.7457: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132506.7789: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132507.8248: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132508.8666: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132509.8997: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132510.9440: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132511.9868: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132513.0218: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132514.0673: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132515.0987: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132515.1143: ClientSetup: Join domain fails on the first time, exception: System.ComponentModel.Win32Exception (0x80004005): The specified
    domain either does not exist or could not be contacted
    at Microsoft.WindowsServerSolutions.ClientSetup.NativeMethods.NativeMethodRetryWrapper(NativeMethodInvoker nmi, UInt32 numTries, TimeSpan timeToWaitBetweenRetries, String descriptionForLog, UInt32[] retryableErrorCodes)
    at Microsoft.WindowsServerSolutions.ClientSetup.NativeMethods.NetJoinDomain(String server, String domain, String destinationOuPath, String user, SecureString password, JoinDomainOptions joinOptions)
    at Microsoft.WindowsServerSolutions.ClientSetup.ComputerMgmt.JoinDomain(String domainName, String domainUserName, SecureString domainUserPass, String machineAccountOU)
    at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.JoinDomainTask.Run(WizData data)
    I am running a Telstra ADSL modem with a separate Cisco router and Netgear Switch.
    I would appreciate any help I can get please as I am a novice and do not understand a lot about the certificate and DNS errors.

    Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

Maybe you are looking for

  • Installing Windows 7 (64 bit) in MacPro 2.6Ghz Intel Xeon - Impossible?

    There is a list of machines on which Bootcamp apparently does not suport Windows 7 - and lucky me, having purchased my copy of 'ultimate' it looks as if mine is one of them. http://support.apple.com/kb/HT3986 According to the list "*Mac Pro (Mid 2006

  • What do I do if the new tab settings will not allow me to change my url preference?

    To Whom It May Concern, Currently when I open a new tab it automatically pulls up the site http://lab.search.conduit.com/HP/SH/?layid=72&gid=1068&gd=&ctid=CT3326234&octid=EB_ORIGINAL_CTID&ISID=M11DEDE1B-4324-401A-AC98-FE9D62A182FE&SearchSource=69&CUI

  • Logout problem

    i faced a problem with sign out in jsp. it happens after you invalidate yur season(when a user clicks Logout) , but as the user clicks back button of the browser it shows the previous page(which only a logged in user can see) & session starts again.

  • Downgrading Firmware for the WRT54G... I can't do it...

    Hello, I am using the WRT54G wireless router, which currently has the 8.0.01 firmware. That's what it came with when i bought it. I am trying to downgrade the firmware to either 3.01.3 or 3.03.6. I want to downgrade to one of those because Xbox said

  • Changing appleid password is a constant pain is the *%$#@

    I'm repeatedly frustrated with the way the password system does and does not work.  A quick round up of my most recent pains this morning: Having been forced to use a capital letter in my nice long non-dictionary safe password, I forget it when i am